Concrete Solutions for architects, engineers and builders since 1974

Epoxy Coatings

Vexcon produces a complete line of technologically-advanced, high-performance breathable and 100% solid epoxy coatings. Our water and solvent-based products address environmental and installation concerns while maintaining exceptional performance and value for a wide range of interior and exterior, new and existing concrete applications.

PowerCoat Epoxy Flexible Joint Sealant

High build sealant barrier against abrasion, corrosion and many other chemicals. Excellent flexibility, ideal for all horizontal joints.

POWERCOAT EPOXY FLEXIBLE JOINT SEALANT is ideal for all horizontal and vertical joints which are not designed for movement but will have excellent flexibility to resist cracking. The product provides a tough and durable sealant with excellent adhesion and flexibility, as well as high impact and abrasion resistance. When used in conjunction with one of Vexcon’s high performance coatings the total system provides a sealant barrier against physical abrasion, corrosion and commonly encountered acid and alkali chemicals. It also resists solvents such as gasoline, kerosene and some alcohols.

BENEFITS

  • Shaveable in 4-6 hours
  • No heat required for shaving
  • Provides excellent adhesion, flexibility, durability, and resistance to impact, water and abrasion
  • Cures with less than 1% shrinkage or loss in film thickness
  • Available in French Gray or Concrete Gray
  • Can be used on horizontal or vertical joints

PowerCoat Epoxy LD

Breathable light duty epoxy for concrete floors in areas of light to medium pedestrian and vehicle traffic and where occasional spillage of chemicals may occur.

POWERCOAT EPOXY LD is a solvent base two component light duty epoxy coating that provides the strength of epoxy in an economical coating that is tough, chemical resistant and long lasting. Designed for concrete floors in areas of light to medium pedestrian, vehicle traffic and where occasional spillage of chemicals may occur such as gas stations, garages, driveways or any concrete surface requiring greater long term wear and staining resistance than a standard acrylic coating.

BENEFITS

  • Better adhesion and durability than standard concrete sealers
  • Excellent protection against gasoline, antifreeze, oil, salt and hot tire marking
  • Good chemical resistance
  • Available in clear gloss and semi-gloss/matte, 19 standard and custom colors
  • PowerCoat breathable technology
  • Apply to damp, fresh and existing concrete
  • Self priming
  • Cost effective

PowerCoat Epoxy LD FT

Low VOC fast drying light duty epoxy for concrete floors in areas of light to medium pedestrian and vehicle traffic and where occasional spillage of chemicals may occur.

POWERCOAT EPOXY LD FT is a fast track solvent base two component light duty epoxy coating that provides the strength of epoxy in an economical coating that is tough, chemical resistant and long lasting. Designed for concrete floors in areas of light to medium pedestrian, vehicle traffic and where occasional spillage of chemicals may occur such as gas stations, garages, driveways or any concrete surface requiring greater long term wear and staining resistance than a standard acrylic coating.

BENEFITS

  • Fast drying
  • Better adhesion and durability than standard concrete sealers
  • Excellent protection against gasoline, antifreeze, oil, salt and hot tire marking
  • Good chemical resistance
  • Available in clear gloss and semi-gloss/matte, 19 standard and custom colors
  • PowerCoat breathable technology
  • Apply to damp, fresh and existing concrete
  • Self priming
  • Cost effective

PowerCoat Epoxy LD WB

Breathable light duty epoxy for concrete floors in areas of light to medium pedestrian and vehicle traffic and where occasional spillage of chemicals may occur.

POWERCOAT EPOXY LD WB is a water base two component light duty epoxy coating that provides the strength of epoxy in an economical coating that is tough, chemical resistant and long lasting. Designed for concrete floors in areas of light to medium pedestrian, vehicle traffic and where occasional spillage of chemicals may occur such as gas stations, garages, driveways or any concrete surface requiring greater long term wear and staining resistance than a standard acrylic coating.

BENEFITS

  • Better adhesion and durability than standard concrete sealers
  • Excellent protection against gasoline, antifreeze, oil, salt and hot tire marking
  • Good chemical resistance
  • Available in clear gloss and semi-gloss/matte, 19 standard and custom colors
  • PowerCoat breathable technology
  • Low odor
  • Apply to damp, fresh and existing concrete
  • Self priming
  • Cost effective

PowerCoat One

Easy to use single component light duty epoxy. Excellent for residentail garage floors.

POWERCOAT ONE is an easy-to-use single-component water-base epoxy styrene acrylate blend. Powercoat One provides the performance of a two-component epoxy in an economical light duty coating that is tough, chemical resistant and long lasting.

BENEFITS

  • Single component epoxy
  • Low odor
  • Stain, gasoline, salt and hot tire resistant
  • Unlimited pot life
  • PowerCoat breathable technology
  • No induction waiting time
  • Interior and exterior applications
  • Use on fresh and existing concrete
  • Better adhesion and durability than standard concrete sealers
  • Self prining
  • Cost effective

PowerCoat Primer

Single component ready to use primers. Apply as a primer to existing concrete or as a cure and primer to new concrete saving time for fast track new construction.

POWERCOAT PRIMER is an advanced solvent base primer that provides superior bonding between concrete surfaces and solvent base epoxy and urethane coatings. The product is unique as it can be applied to damp surfaces and fresh concrete to cure and prime the surface for proper curing and fast track project completion.

BENEFITS

  • Superior adhesion
  • Fast drying
  • Meets ASTM C-1315
  • Bonds in the presence of moisture
  • Available in clear and 15 standard and custom colors
  • Apply to new concrete for fast track project completion
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-309
  • Does not blush or whiten when applied to damp surfaces
  • Prevents efflorescence, dusting and spalling
  • Aids in keeping floors cleaner during construction

PowerCoat Primer AIM

Low VOC single component ready to use primers. Apply as a primer to existing concrete or as a cure and primer to new concrete saving time for fast track new construction.

POWERCOAT PRIMER AIM is an advanced solvent base primer that provides superior bonding between concrete surfaces and water base epoxy and urethane coatings. The product is unique as it can be applied to damp surfaces and fresh concrete to cure and prime the surface for proper curing and fast track project completion.

BENEFITS

  • Low VOC <250 grams/liter
  • Superior adhesion
  • Fast drying
  • Meets ASTM C-1315
  • Bonds in the presence of moisture
  • Available in clear and 15 standard and custom colors
  • Apply to new concrete for fast track project completion
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-309
  • Does not blush or whiten when applied to damp surfaces
  • Prevents efflorescence, dusting and spalling
  • Aids in keeping floors cleaner during construction

PowerCoat Primer WB

Single component ready to use primers. Apply as a primer to existing concrete or as a cure and primer to new concrete saving time for fast track new construction.

POWERCOAT PRIMER WB is an advanced water base primer that provides superior bonding between concrete surfaces and water base epoxy and urethane coatings. The product is unique as it can be applied to damp surfaces and fresh concrete to cure and prime the surface for proper curing and fast track project completion.

BENEFITS

  • Low VOC <300 grams/liter
  • Superior adhesion
  • Meets ASTM C-1315
  • Bonds in the presence of moisture
  • Available in clear and 15 standard and custom colors
  • Apply to new concrete for fast track project completion
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-309
  • Does not blush or whiten when applied to damp surfaces
  • Prevents efflorescence, dusting and spalling
  • Aids in keeping floors cleaner during construction
  • Low odor