Concrete Solutions for architects, engineers and builders since 1974

Repair Mortars, Grouts & Epoxies

Long lasting restoration requires high performance products engineered to eliminate future repairs. Our complete line of user friendly repair products will restore integrity and strength too many structures and include cementitious patching and repair mortars, bonding agents, resurfacing and epoxy materials used for structural, nonstructural and cosmetic repairs of horizontal, vertical and overhead applications.

Certi-Vex Grout 1100

Cost effective, non-shrink, non-metallic grout which will achieve high early compressive and bond strength.

CERTI-VEX GROUT 1100 is a cost effective, non-shrink, non-metallic grout which will achieve high early compressive and bond strengths. Certi-Vex Grout 1100 is easily mixed for grouting at any consistency; dry pack, trowelable, plastic or fluid. It contains no iron particles, chlorides or gypsum and will not corrode, shrink, rust or ravel even under consistently moist conditions. Advanced technology reduces the water cement ratio producing high compressive strengths yielding a denser and stronger grout.

BENEFITS

  • Easy to use. Just add water
  • High density-increases bond to metal, wood and other materials
  • Requires no special treatment on open ends or edges, no capping or cutbacks
  • Density increases wearability and permeability; withstands heat and thermal shock
  • Water tight, resists freeze/thaw, water conditions and salt penetration
  • Resists a variety of oils and chemicals
  • Contains no free lime, will not produce efflorescence

Certi-Vex Patch FP

Repair mortar for shallow surface defects up to 1/2".

CERTI-VEX PATCH FP uses advanced polymer modified portland cement for the patching and restoration of concrete from feather edge to ½ inch. Similar to concrete in color, Certi-Vex Patch FP is ideal for repairing of surface defects in horizontal and vertical concrete and masonry such as cracks, spalls, bugholes and shallow honeycombs. Certi-Vex Patch FP may be used in place of rubbing and sacking by coating both new and old concrete surfaces to produce a uniform texture and color.

BENEFITS

  • One component, just add water
  • Polymer fortified formulation
  • Excellent freeze/thaw resistance
  • Self curing in most applications
  • High compressive, flexural, tensile and bond strength
  • Excellent performance from feather edge to ½ inch thickness
  • Extended working time

Certi-Vex Patch FS

Single component, fast setting portland cement based, polymer modified patching mortar for vertical, overhead and horizontal repairs up to 2".

CERTI-VEX PATCH FS is a fast setting single component, portland cement based, polymer modified patching mortar designed to repair and rehabilitate a wide variety of surfaces. The fast setting, low shrinkage and high strength of Certi-Vex Patch FS allows it to be featheredged or shaved to desired shape up to 2 inch thickness in a single application.

BENEFITS

  • Vertical, overhead and horizontal surfaces
  • Excellent strengths
  • Structural repairs
  • Good impact resistance
  • Repairs up to 2 inch in depth in single lift
  • Excellent freeze/thaw resistance
  • Rapid set range 6 – 20 minute initial set
  • Interior and exterior use
  • On grade, above and below grade repairs
  • Excellent bond, tensile and flexural strength
  • Non-shrink
  • Meets ASTM C-928 for dry packaged rapid hardening cementitious materials for concrete repairs

Certi-Vex Patch FS Plus

Single component, fast setting portland cement based, polymer modified patching mortar with a corrosion inhibitor.

CERTI-VEX PATCH FS PLUS is a fast setting single component, portland cement based, polymer modified patching mortar with corrosion inhibitor designed to repair and rehabilitate a wide variety of surfaces. The fast setting, low shrinkage and high strength of Certi-Vex Patch FS Plus allows it to be featheredged or shaved to desired shape up to 2 inch thickness in a single application.

BENEFITS

  • Corrosion inhibitor for rebar & steel protection
  • Structural repairs
  • Good impact reistance
  • Repairs up to 2 inch in depth
  • Excellent freeze/thaw resistance
  • Excellent bond, tensile, compressive and flexural strengths
  • Rapid set range 6 – 20 minute initial set
  • Non-shrink
  • Meets ASTM C-928 for dry packaged rapid hardening cementitious materials for concrete repairs
  • Interior and exterior use

Certi-Vex Patch RTU

One component, preblended cementitious polymer for cosmetic repair of concrete. The product comes in a tinted concrete gray color that is ready to use right out of the container. The material can be saved for future use minimizing wasted product.

CERTI-VEX PATCH RTU is a one component, ready to use preblended cementitious polymer material engineered for cosmetic repair of concrete. The product comes in a tinted concrete gray color that is ready to use right out of the container. The material is easy to use and unlike other materials unused Certi-Vex Patch RTU can be saved for future use.

Certi-Vex Patch RTU provides excellent bonding, flexural and tensile strengths and water resistance due to its unique polymer mixture. Use to repair spalls, rock pockets, honeycombs, holes, cavities or cracks in concrete or stucco with a depth not greater than 3/8” and widths from 1/16” to 3/8”. Certi-Vex Patch RTU is supplied as a sandable, trowel grade mortar and can be feather edged.

BENEFITS

  • Ready to Use
  • Reduce material waste
  • Money saving
  • Concrete gray color
  • Quick return to service
  • No primer needed
  • Easy to place, consolidate and finish
  • Can be applied to damp surfaces
  • Can be applied 3 days after placement of concrete
  • Accepts topical coatings