Concrete Solutions for architects, engineers and builders since 1974

Other Products

Certi-Vex Coating Repair

Re-casts an existing coating correcting application imperfections, such as bubbles and over applied thick coatings.

CERTI-VEX COATING REPAIR will effectively re-cast an existing coating correcting application imperfections, such as bubbles and over applied thick coatings. Its controlled evaporation rate allows the coating to properly dry. Once corrected, the coated floor will have a uniform appearance.

BENEFITS

  • Slower evaporation rate than Xylene or Toluene
  • Enhances uniform film formation
  • Can be used on solvent and waterbased coatings
  • Slower evaporation rate helps keep film open to minimize air bubble formation
  • Reduces cob webbing
  • Non-red label

Certi-Vex Concrete Remover

Softens concrete build up for quick cleaning of hardened concrete and when applied as a treatment will prevent concrete bonding and buildup.

CERTI-VEX CONCRETE REMOVER is a premium, chemically active metal form and equipment cleaning and maintenance treatment. Made from virgin oil stock and proprietary concrete softening and removal compounds, the product will effectively soften concrete build up for quick cleaning of hardened concrete and when applied as a treatment will prevent concrete bonding and buildup. Certi-Vex Concrete Remover is ideal for all residual applications ranging from trucks, slides, trowels, power screeds, scaffolding, paving and forming equipment where fresh concrete has been allowed to adhere or as part of a maintainance program to prevent concrete from bonding to treated surfaces.

BENEFITS

  • Fast and easy removal of hardened concrete
  • Prevents concrete build up before it starts
  • Use on horizontal and vertical surfaces
  • Non staining
  • Excellent anti-stick properties for metal
  • Minimum labor-just spray or brush on concrete

Certi-Vex Liquid Stamp Release

Liquid texture matt release agent forms a barrier between the concrete surface and texturing (stamp) tool preventing the tool from sticking to the concrete surface.

CERTI-VEX LIQUID STAMP RELEASE  is a liquid texture mat releasing agent. The product forms a barrier between the concrete surface and texturing (stamp) tool preventing the stamp from sticking to the concrete surface. The product is ideal for use in areas where a powder release would be too dusty to use.

BENEFITS

  • Non-staining
  • Clean to work with
  • Interior and exterior applications
  • Increases useful life of the stamp
  • Pleasant odor

Certi-Vex Non-Slip Additive

Increased slip resistance, highly pure controlled particle size silica for addition to Vexcon Powercoat coatings.

CERTI-VEX NON-SLIP ADDITIVE is a highly pure particle size controlled sand for addition to Vexcon epoxy and urethane coatings for increased slip resistance and fine texturing. Certi-Vex Non-Slip Additive has low oil absorption and high solvent resistance and will stir easily into the coatings with little effect on the coating viscosity.

BENEFITS

  • Good compatibility with minimal viscosity effects
  • Can be added to water or solvent based system
  • Improves slip resistance
  • Good chemical and abrasion resistance

Certi-Vex Rust Remover

Quickly removes rust from steel forms and equipment. This product will also remove rust stains from concrete.

CERTI-VEX RUST REMOVER quickly and effectively removes rust from steel forms and equipment. The product will also remove rust stains on concrete.

BENEFITS

  • Fast acting removal of rust from metal surfaces
  • Prevents damage too and maintains forms and equipment
  • When properly neutralized, is non-corrosive
  • VOC compliant

Certi-Vex Sure Slide

Graphite based lubricant for allowing dowel bars to slide in concrete pavements.

CERTI-VEX SURE SLIDE is a technologically advanced graphite based lubricant for allowing dowel bars to slide in concrete pavements.

BENEFITS

  • Superior lubricant over grease and oil
  • Graphite plates yield smooth slide
  • Long lasting vehicle for smooth lubrication
  • Wash-out resistant
  • 43% premium plated graphite
  • No volatile solvents
  • Non-sagging prevents run off
  • Pre-mixed to application viscosity

Certi-Vex Talc Release

Aids in protecting newly coated floors from damage caused by on going construction work.

CERTI-VEX TALC RELEASE is a partical size controlled talc with special release agents, aids in protecting newly coated floors from damage caused by on going construction work. The products special release agents prevent sticking and blocking of temporary protective coverings, such as building paper, plastic, cardboard and plywood.CERTI-VEX TALC RELEASE is applied to coatings that are dry to touch, but still might be “green”, (not fully dried through).

BENEFITS

  • Allows for construction work to continue over completed covered floors without scratching and marking
  • Easy clean up – just vacumm up residual release

Certi-Vex Traffic Marking Paint

Low VOC, high solids acrylic stabilized traffic marking paint that is tough, chemical resistant, long lasting, non-yellowing and reflective.

CERTI-VEX TRAFFIC MARKING PAINT is a high solids, low VOC solvent based colored styrene acrylic stabilized co-polymer traffic marking paint that is tough, chemical resistant, long lasting, non-yellowing and reflective. Versatile and cost effective Certi-Vex Traffic Marking Paint is ideal for both interior and exterior applications.

BENEFITS

  • Non-Yellowing
  • Low VOC
  • Available in Traffic White, Safety Yellow and Blue
  • Premium protection against attack by alkali, oil, cleaners and common industrial chemicals
  • Excellent adhesion and durability
  • Fast drying
  • Suitable for low temperature application
  • Re-coatable
  • Enhanced dirt resistance
  • Can be applied to damp concrete

Certi-Vex Zone Marking Paint

High solids acrylic stabilized zone marking paint that is tough, chemical resistant, long lasting, non-yellowing and reflective.

CERTI-VEX ZONE MARKING PAINT is a high solids, solvent based colored styrene acrylic stabilized co-polymer traffic marking paint that is tough, chemical resistant, long lasting, non-yellowing and reflective. Versatile and cost effective Certi-Vex Zone Marking Paint is ideal for both interior and exterior applications.

BENEFITS

  • Non-yellowing
  • Available in traffic white, safety yellow and blue
  • Easy to apply
  • Premium protection against attack by alkali, oil, cleaners and common industrial chemicals
  • Excellent adhesion and durability
  • Fast drying
  • Suitable for low temperature application
  • Re-coatable
  • Enhanced dirt resistance
  • Prevents efflorescence
  • Can be applied to damp concrete

StarSeal Consolidator

Strengthens weathered surfaces and weakened mortar.

STARSEAL CONSOLIDATOR is a precatalized inorganic polymer which is designed to bind weak surfaces of sandstone, marble, brownstone, limestone, carbonated, weak concrete and mortar to prevent powdering and degradation of the surface. This unique product creates a hard binder between grains of sandy or friable surfaces of masonry, natural stone, concrete and mortar.

BENEFITS

  • Consolidates sandstone, marble, brownstone, limestone, arenite, carbonated and laitanced concrete and masonry surfaces
  • Odorless
  • Reduces water permeability of sandy and friable surfaces
  • Increases weatherability and abrasion resistance of treated surface
  • No surface film
  • Does not change the surface appearance (may deepen color of some natural stone)
  • Eliminates dusting
  • Fast track installation eliminating multiple application cycles
  • Quick drying
  • Cured surface compatible with Vexcon’s water repellents and wall coatings