MoistureBloc®
MoistureBloc products are guaranteed to reduce excess moisture vapor in concrete to three pounds or below, preventing adhesive failure from excess moisture in concrete. Vexcon Offers a wide range of product solutions to control moisture. Easy to use, cost effective and fast installation for new and existing concrete are just a few of the benefits designed to meet your specific job requirements. Ensure successful flooring installations with MoistureBloc.
VOC Water Base
MoistureBloc® Emulsion One Step Vapor Reduction
One coat application, minimal odor, very low per square foot cost, reduces moisture vapor readings ranging from 8-9 lbs. Guaranteed to prevent flooring adhesion failures from moisture vapor in concrete and alkali degradation. Promotes resistance to mildew, algae and bacteria.
Support Documentation (PDF Files)
MoistureBloc® Emulsion Vapor Reduction System
Easy two step application, minimal odor, low per square foot cost, reduces moisture vapor readings ranging from 12-15 lbs. Guaranteed to prevent flooring adhesion failures from moisture vapor in concrete and alkali degradation. Promotes resistance to mildew, algae and bacteria.
Support Documentation (PDF Files)
MoistureBloc® Universal
One coat application, minimal odor, adhesive can be applied after 12 hours, reduces moisture vapor readings ranging from 9 to under 3lbs. Can be used interior and exterior with reactive and non reactive adhesives. Meets all California VOC regulations and LEED point standards.
Support Documentation (PDF Files)
VOC Solvent Base
MoistureBloc® Stripper
An eco-friendly heavy bodied stripper designed for the cleaning and removal of coatings and other residues from concrete surfaces. MoistureBloc Stripper will effectively and safely remove paints, varnishes, urethanes, epoxies, sealers, acrylics, floor waxes and curing compounds from concrete floors receiving MoistureBloc products.
Support Documentation (PDF Files)
MoistureBloc® Surface Bond
Improves the bond between a MoistureBloc treated surface and leveling and patching compounds such as MoistureBloc SLU and MoistureBloc Patch. The product comes ready to use and can be re-emulsified when cement topping application is delayed.
Support Documentation (PDF Files)
MoistureBloc® SLU
A high strength and fast setting single component self leveling underlayment designed to level and smooth interior MoistureBloc treated substrates prior to installation of finished flooring.
Support Documentation (PDF Files)
MoistureBloc® Floor Cleaner
An eco-friendly all natural industrial surface preparation cleaner. MoistureBloc Floor Cleaner will effectively and safely clean grease and oil stains, tire marks and dirt from concrete floors receiving MoistureBloc products. MoistureBloc Floor Cleaner rinses clean to a sparkly clean floor.
Support Documentation (PDF Files)
MoistureBloc® Patch
A self curing advanced polymer modified high strength leveling compound for patching and restoration of interior MoistureBloc treated concrete floor surfaces. It provides excellent bonding, flexural and tensile strengths as well as excellent water resistance due to its low permeability.
Support Documentation (PDF Files)
MoistureBloc® Vapor Reduction FT System
Fast track installation,18 hours from start to laying flooring, easy two step application, low odor, low per square foot cost, reduces moisture vapor readings ranging from 12-15 lbs. Guaranteed to prevent flooring adhesion failures from moisture vapor in concrete and alkali degradation. Promotes resistance to mildew, algae and bacteria.
Support Documentation (PDF Files)
MoistureBloc® Primer MX
Advanced curing and sealing primer used exclusively with MoistureBloc
MX. Apply to new concrete for fast track installation or existing concrete.
Support Documentation (PDF Files)
MoistureBloc® MX
Maximum protection against flooring adhesive failure caused from moisture vapor in concrete. Guaranteed to reduce 27/# calcium chloride test to below 3.0#/ 1000 sq. ft./24hrs. Promotes resistance to mildew, algae and bacteria.
Support Documentation (PDF Files)
VOC Not Required
MoistureBloc® Adhesive Remover
Strips adhesives from concrete floors and other concrete surfaces with relative ease. Removes many types of adhesives from concrete such as, cut back, latex and pressure sensitive. The product will also clean oil stains from concrete.
Support Documentation (PDF Files)
|
