Concrete Solutions for architects, engineers and builders since 1974
MoistureBloc is a full line of products for moisture vapor control.
MoistureBloc Surface Bond
Improves the bond between a MoistureBloc treated surface and leveling and patching compounds.
MOISTUREBLOC SURFACE BOND improves the bond between a MoistureBloc treated surface and leveling and patching compounds such as MoistureBloc SLU and MoistureBloc FP. The product comes ready to use and can be re-emulsified when cement topping application is delayed. It provides both chemical adhesion and mechanical bonding between two surfaces and is hard, tough, flexible, and resistant to UV. It also resists damage from freeze-thaw cycles, cracking and shrinkage.
BENEFITS
Low odor
Resists most common industrial chemicals, heat and freeze-thaw cycles
Easy to use
Ideal when bonding is delayed
Topping can re-emulsify so the two cement surfaces form a strong bond
Stripper to clean and remove coatings and other residues.
MOISTUREBLOC STRIPPER is an eco-friendly heavy bodied stripper designed for the cleaning and removal of coatings and other residues such as paints, varnishes, urethanes, epoxies, sealers, acrylics, floor waxes and curing compounds from concrete floors receiving MoistureBloc products. MoistureBloc Stripper will penetrate and remove multiple layers of coatings using less material then traditional stripping products in one application saving time and cost. MoistureBloc Stripper is derived from soybean oil which is an environmentally friendly bio based agricultural material making it user safe, low odor and easily cleaned up with water.
A high strength and fast setting self leveling underlayment designed to level and smooth interior MoistureBloc treated substrates prior to installation of finished flooring.
MOISTUREBLOC SLU is a high strength and fast setting single component self leveling underlayment designed to level and smooth interior MoistureBloc treated substrates prior to installation of finished flooring. It is intended for use over properly prepared non-porous concrete substrates. Floors can be covered with carpet, linoleum, tile, hardwood or polymer coatings. MoistureBloc SLU contains polymer modified Portland cement combined with high quality fine aggregate to produce a fast-setting, high-strength characteristic.
BENEFITS
Ready to use or may be extended with properly graded sand
Meets ASTM C33 for high quality aggregate
Smooth flowing for pumped or poured application
Crack and shrink resistant
Can be featheredged
Rapid high early strength gain
Ready for foot traffic in 4 hours
Fast turnaround-ready for surface material in 24 hours
Economical one coat application reduces moisture vapor readings as high as 10 to under 3 lbs. (RH 80%). Adhesive ready in 12 hours.
MOISTUREBLOC ONE STEP is a water base one component, economical vapor reduction product based on unique breathable technology which prevents and protects against floor adhesive failure on concrete surfaces containing elevated levels of moisture vapor. When applied prior to the installation of floor covering materials such as VCT, carpet, linoleum, vinyl and wood the product is guaranteed to reduce moisture vapor emissions (MVER) from as high as 10/# per ASTM F-1869 calcium chloride test results to below 3.0#/1000 sq. ft./24hrs. MoistureBloc One Step is an easy to use one coat application and due to its superior penetration and adhesion does not require extensive surface preparation or surface profiling such as shot blasting and can be applied to damp, tightly finished or densified surfaces.
MoistureBloc One Step can be applied to existing and newly place concrete surfaces properly curing the concrete for fast track project completion and quick installation of floor covering material.
BENEFITS
Reduces moisture vapor readings up to 10 lbs. to under 3 lbs.
Adhesive ready in 12 hours
Easy one coat application
Does not require shot blasting or other mechanical surface preparation
Low odor
Resistant to acids, alkalis and reduces the moisture environment which allows mold and fungus to grow
Advanced polymer modified cement for the patching and restoration of concrete floors.
MOISTUREBLOC FP uses advanced polymer modified portland cement for the patching and restoration of concrete floors not subjected to concentrated or point loading which will be covered with a flooring material.
BENEFITS
Non-shrink, smooth, non-reflective surface
One component, just add water
Polymer fortified formulation
Excellent freeze/thaw resistance
Self curing in most applications
High compressive, flexural, tensile and bond strength
Excellent performance from feather edge to ½ inch thickness
Low VOC cost effect, fast track installation reduces moisture vapor readings ranging from 10-19 to under 3 lbs. Can be used with reactive and non reactive adhesives.
Low VOC cost effect, fast track installation reduces moisture vapor readings ranging from 10-19 to under 3 lbs. Can be used with reactive and non reactive adhesives.
Cost effect, fast track installation reduces moisture vapor readings ranging from 10-19 to under 3 lbs. Can be used with reactive and non reactive adhesives.
Cost effect, fast track installation reduces moisture vapor readings ranging from 10-19 to under 3 lbs. Can be used with reactive and non reactive adhesives.
Low VOC maximum protection against flooring adhesive failure caused from moisture vapor in concrete. Guaranteed to reduce 27/# calcium chloride test to below 3.0#/ 1000 sq. ft./24hrs.(RH 99%).
MOISTUREBLOC MX AIM System low VOC, prevents and protects against floor adhesive failure on concrete surfaces containing elevated levels of moisture vapor. Applied prior to the installation of floor covering materials such as VCT, carpet, linoleum, vinyl and wood the system is guaranteed to reduce moisture vapor emissions (MVER) from as high as 27/# per ASTM F-1869 calcium chloride test results to below 3.0#/1000 sq. ft./24hrs. The product can be applied to concrete slabs with relative humidity (RH) up to 99% per ASTM F-2420.
The MoistureBloc MX AIM system can be applied to existing and newly place concrete surfaces properly curing the concrete for fast track project completion and quick installation of floor covering material.
BENEFITS
Reduces moisture vapor readings up to 27 lbs. to under 3 lbs.
Solvent base – Low VOC
Cost effective
Does not require shot blasting or other costly mechanical surface preparation
Eliminates adhesive failure caused by moisture vapor and alkaline salt attack
Effective mold and mildew blocker
Low VOC
Can be used with reactive and non reactive adhesives
Apply to damp and new concrete surfaces
Application rate does not vary based on pre-application tests results
Maximum protection against flooring adhesive failure caused from moisture vapor in concrete. Guaranteed to reduce 27/# calcium chloride test to below 3.0#/ 1000 sq. ft./24hrs.(RH 99%).
MOISTUREBLOC MX System prevents and protects against floor adhesive failure on concrete surfaces containing elevated levels of moisture vapor. Applied prior to the installation of floor covering materials such as VCT, carpet, linoleum, vinyl and wood the system is guaranteed to reduce moisture vapor emissions (MVER) from as high as 27/# per ASTM F-1869 calcium chloride test results to below 3.0#/1000 sq. ft./24hrs. The product can be applied to concrete slabs with relative humidity (RH) up to 99% per ASTM F-2420.
The MoistureBloc MX System can be applied to existing and newly place concrete surfaces properly curing the concrete for fast track project completion and quick installation of floor covering material.
BENEFITS
Reduces moisture vapor readings up to 27 lbs. to under 3 lbs.
Cost effective
Does not require shot blasting or other costly mechanical surface preparation
Eliminates adhesive failure caused by moisture vapor and alkaline salt attack
Effective mold and mildew blocker
Can be used with reactive and non reactive adhesives
Apply to damp and new concrete surfaces
Application rate does not vary based on pre-application tests results
A breathable two-part epoxy flexible joint filler designed for use on MoistureBloc treated surfaces that require fast-track filling and sealing of moving expansion/ control joints.
MOISTUREBLOC FLEXIBLE JOINT SEALANT is a breathable two-part epoxy flexible joint filler designed for use on MoistureBloc treated surfaces that require fast-track filling and sealing of moving expansion/contraction joints. The product is tough and durable with excellent adhesion and flexibility to resist cracking, as well as high impact and abrasion resistance.
BENEFITS
Shaveable in 4-6 hours
No heat required for shaving
Provides excellent adhesion, flexibility, durability, and resistance to impact, water and abrasion
Cures with less than 1% shrinkage or loss in film thickness
MoistureBloc Vapor Reduction System (VRS) Emulsion
Cost effective easy two step application reduces moisture vapor readings ranging from 10-15 to under 3lbs. Can be used with reactive and non reactive adhesives.
Cost effective easy two step application reduces moisture vapor readings ranging from 10-15 to under 3lbs. Can be used with reactive and non reactive adhesives.
One coat application reduces moisture vapor readings ranging from 8 to under 3 lbs. Use with reactive and non reactive adhesives. Meets all California VOC regulations and LEED point standards. Adhesive ready in 12 hours.
MOISTUREBLOC UNIVERSAL is a water base one component, economical vapor reduction product based on unique breathable technology which prevents and protects against floor adhesive failure on concrete surfaces containing elevated levels of moisture vapor. MoistureBloc Universal is ideal for use with urethane and epoxy reactive adhesives. When applied prior to the installation of floor covering materials such as VCT, carpet, linoleum, vinyl and wood the system is guaranteed to reduce moisture vapor emissions (MVER) from as high as 8/# per ASTM F-1869 calcium chloride test results to below 3.0#/1000 sq. ft./24hrs. MoistureBloc Universal is an easy to use one coat application and due to its superior penetration and adhesion does not require extensive surface preparation or surface profiling such as shot blasting and can be applied to damp, tightly finished or densified surfaces.
MoistureBloc Universal can be applied to existing and newly place concrete surfaces properly curing the concrete for fast track project completion and quick installation of floor covering material.
BENEFITS
Reduces moisture vapor readings up to 8 lbs. to under 3 lbs.
Ideal for reactive adhesives
Adhesive ready in 12 hours
Easy one coat application
Does not require shot blasting or other mechanical surface preparation
Low odor
Resistant to acids, alkalis and reduces the moisture environment which allows mold and fungus to grow
Maximum protection against flooring adhesive failure caused from moisture vapor in concrete. Guaranteed to reduce 27/# calcium chloride test to below 3.0#/ 1000 sq. ft./24hrs.(RH 99%).
Moisturebloc MX Emulsion System prevents and protects against floor adhesive failure on concrete surfaces containing elevated levels of moisture vapor. Applied prior to the installation of floor covering materials such as VCT, carpet, linoleum, vinyl and wood the system is guaranteed to reduce moisture vapor emissions (MVER) from as high as 27/# per ASTM F-1869 calcium chloride test results to below 3.0#/1000 sq. ft./24hrs. The product can be applied to concrete slabs with relative humidity (RH) up to 99% per ASTM F-2420.
The MoistureBloc MX Emulsion system can be applied to existing and newly place concrete surfaces properly curing the concrete for fast track project completion and quick installation of floor covering material.
BENEFITS
Reduces moisture vapor readings up to 27 lbs. to under 3 lbs.
Cost effective
Low odor
Does not require shot blasting or other costly mechanical surface preparation
Eliminates adhesive failure caused by moisture vapor and alkaline salt attack
Effective mold and mildew blocker
Low VOC
Can be used with reactive and non reactive adhesives
Apply to damp and new concrete surfaces
Application rate does not vary based on pre-application tests results
Cleans grease and oil stains, tire marks and dirt from concrete floors.
MOISTUREBLOC FLOOR CLEANER is an eco-friendly all natural industrial surface preparation cleaner. MoistureBloc Floor Cleaner will effectively and safely clean grease and oil stains, tire marks and dirt from concrete floors receiving MoistureBloc products. MoistureBloc Floor Cleaner is derived from soybean oil which is an environmentally friendly bio based agricultural material making it user safe, low odor and easily cleaned up with water.
MOISTUREBLOC ADHESIVE REMOVER strips adhesives from concrete surfaces with relative ease. Removes many types of adhesives from such as cut back, latex and pressure sensitive. The product will also clean oil stains from concrete. After use, MoistureBloc Adhesive Remover is emulsifiable with water and general cleaners to yield a concrete surface that is clean and ready for subsequent treatments. To remove coatings such as epoxies, sealers and curing compounds, use MoistureBloc Stripper.