Concrete Solutions for architects, engineers and builders since 1974

StarSeal is a complete product line of water based construction chemicals that are high performing, low VOC and low odor.

StarSeal Cure Hard

A ready to use water based residual free silicate solution that produces chemicals hardening of new concrete. May also be used as a curing aid and hardener on interior hard trowled concrete floors

STARSEAL CURE HARD is a ready to use water based residual free silicate solution that produces chemical hardening of new concrete surfaces. It is formulated with proprietary additives to encourage maximum penetration and to minimize dusting. May also be used as a curing aid and hardener on interior hard trowled concrete floors.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Reduces dusting
  • Accepts subsequent application of water repellents
  • Allows for bonding of all floor finishes
  • Low maintenance finished surface
  • Cure Aid
  • Economical

StarSeal Guard DC

A water based innovative one step product that combines the benefits of a penetrating water repellent sealer and a dissipating white curing compound for fresh concrete into one product.

STARSEAL GUARD DC is a multi-purpose water base innovative one step penetrating silane water repellent and dissipating white curing compound that is applied to new freshly placed concrete. It immediately penetrates the pores and capillaries of the concrete reacting with the alkali and moisture to form a repellent hydrophobic gel in the pores and a water retentive membrane on the surface.

BENEFITS

  • Complete projects faster
  • Cures fresh concrete
  • Seal & protect concrete against damage from salt & moisture
  • Reduces damage from freeze/thaw cycles
  • Produce stronger, more durable and longer lasting concrete
  • Meets industry standards
  • Cost savings
  • Deep penetration for maximum protection

 

StarSeal Lithium S+

A lithium silicate hardener/denisifier that rapidly penetrates without scrubbing and rinsing producing a fully densified floor that is wear-pattern free, shine retentive permanently sealed, low-maintenance, stain-free concrete floor.

StarSeal Lithium S + with shine enhancers intensifies the natural beauty of gray and decorative concrete producing a wear-pattern free, shine retentive permanently sealed, low-maintenance concrete floor.

BENEFITS

  • Deep penetration
  • Permanently protected and sealed
  • No scrubbing or rinsing required
  • Eliminates or reduces waste stream during installation
  • Odorless, non-hazardous, USDA approved
  • Breathable and UV stable
  • Slip resistant
  • Abrasion, wear resistant
  • No topical film to wear through
  • 10 year warranty
  • Low maintenance, no waxing or resurfacing required

StarSeal 500

Non-yellowing, low odor exterior actylate curing, sealing, hardening dust proofing water and stain repellent. Breathable medium gloss, cost effective and non-yellowing sealer ideal for exterior & existing concrete.

StarSeal 500 is a water based 100% non-yellowing acrylate curing, sealing, hardening dust proofing, and water repellent compound which meets requirements of ASTM – Type A. Easily to apply, StarSeal 500 quickly forms a hard, crystal clear film that is tough, water repellent and, stain resistant.

BENEFITS

  • Provides for complete development of fresh concrete’s wear resistance and strength properties
  • Non-Yellowing
  • Clear gloss surface
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface, reducing clean-up and maintenance costs
  • Excellent protection against staining, attack by alkali, oil, cleaners and common chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Economical
  • Recoatable
  • Low odor

StarSeal Guard

Cost effective water based clear one-step penetrating silane water repellent, cure and seal. Cures fresh concrete while providing long term protection against damage caused by freeze/thaw, water, salts and deicer chemicals.

STARSEAL GUARD is a water base clear innovative one step penetrating silane water repellent cure and seal that can be applied to new or existing concrete. It immediately penetrates the pores and capillaries of the concrete reacting with the alkali and moisture to form a repellent hydrophobic gel in the pores and a water retentive membrane on the surface.

This membrane, which meets ASTM curing requirements and the Chloride Ion Penetration requirements of NCHRP 244 forms a film that restricts moisture loss allowing concrete to reach maximum hardness and reduces staining, chloride penetration, prevents intrusion of water, salts, deicer chemicals and acids that can result in costly damage to concrete and masonry.

This innovative one-step product eliminates the costly removal of curing compounds and time consuming water curing of fresh concrete when a protective penetrating water repellent sealer is desired. Once applied, the surface is properly cured and water repellent in one application and puts concrete into service weeks sooner.

BENEFITS

  • Complete projects faster
  • Seal & Protect against damage form salt and moisture
  • Seals out water, oil, grease and other stains. See TN107A
  • Produce Stronger, more durable and longer lasting concrete
  • Cures Fresh Concrete
  • Meets industry standards
  • Cost effective
  • Vexcon breathable technology
  • Deep penetration for maximum protection
  • Quick formation of surface repellency and chemical resistance.
  • Low odor

StarSeal Fusion Release and Grinding Aid

Aids in the removal of concrete buildup from floor grinding machines and diamond tools.

STARSEAL FUSION RELEASE AND GRINDING AID is a non-staining crystal clear water based release agent with surface activated detergents designed to prevent the adhesion of concrete to floor grinding and tooling equipment. The product is spray applied to the bottom of grinding equipment and diamond tools forming a film that prevents heavy build up during the grinding and polishing process.

BENEFITS

  • Can be used with StarSeal Fusion or wet grinding aid
  • Grinding Aid
  • Non-staining
  • Quick drying
  • Will not deteriorate or damage surface – prevents scratches
  • Increases tooling useful life and reduces grinding passes
  • Decrease labor, maintenance costs and clean up
  • Can be used as a release on dry grinding

PowerSeal Stain Guard

Breathable clear non film forming sealer that protects against staining and water penetration.

POWERSEAL STAIN GUARD is an advanced water base weather, stain and discoloration protective non film forming treatment for horizontal and vertical hard, porous, decorative and functional surfaces. Powerseal Stain Guard’s deep penetrating and pore clogging formula creates a molecular bond within the surfaces pores yielding unequaled stain protection from food, salts, water, oil, dirt, acids and other common stains. Powerseal Stain Guard also protects against the damaging effects of weather-related conditions such as wind-driven rain, freeze/thaw cycles, moisture and chloride ion intrusion from deicing salts. Surfaces treated with PowerSeal Stain Guard have a totally natural appearance.

BENEFITS

  • Advanced protective treatment prevents staining and discoloration
  • Protects natural and colored surfaces
  • Vertical and horizontal surfaces
  • Interior and exterior surfaces
  • Breathable – Prevents damage from within by maintaining vapor permeability of substrate
  • An effective chloride screen reducing surface erosion and corrosion
  • Long lasting protection
  • Can be applied to damp surfaces
  • Suitable for alkaline concrete surfaces
  • Water base – safe to use – low odor
  • Reduces on-going maintenance and repair costs
  • Does not alter natural surface texture or appearance
  • Keeps surface cleaner

StarSeal Vertical Stain

Breathable acrylic economical coating that provides good protection from the elements while enhancing and revitalizing.

STARSEAL VERTICAL STAIN is a ready-to-use advanced acrylic water based penetrating coating which provides economical weatherproofing from the elements for fresh or existing concrete, masonry, block and stucco while enhancing the architectural features of the structure. This colored curing and sealing compound quickly forms a uniform decorative, hard, dustproof, water repellent, chemical and stain resistant protective barrier which seals, enhances and revitalizes the appearance of new or existing vertical architectural concrete and masonry. The product provides good protection from moisture, salts, staining and other harmful elements.

BENEFITS

  • Good protection from moisture, salts, staining and other harmful elements
  • Available in 50 standard and custom colors.
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Low odor
  • Seals and hardens surface, reducing clean-up and maintenance costs
  • Prevents efflorescence, dusting and spalling
  • Resistant to yellowing and color fading
  • Enhances and revitalizes old, stained or uncolored surfaces
  • Apply to damp surfaces without loss of adhesion
  • Corrects color variations

StarSeal HBC Tex/Smooth Emulsion

Breathable low odor smooth and textured waterproof coatings that enhance the aesthetic appearance while providing superior performance, excellent adhesion, flexibility and resistance to wind driven rain, UV light, molds and mildew.

STARSEAL HBC TEXTURED & SMOOTH EMULSION are manufactured from emulsion modified acrylic resins with select pigments and fillers including portland cement, to produce a decorative high-build acrylic waterproof coating. This product provides an attractive, breathable, protective coating that enhances the aesthetic appearance of vertical concrete, masonry, block, wood and primed metal surfaces.Provides excellent adhesion and years of weathering and waterproofing protection from the elements. The product’s one coat application saves time and money over typical two and three coat systems.

BENEFITS

  • Resistant to UV light, molds and mildew
  • Withstands 100 mph wind driven rain
  • Covers surface blemishes, cracks and surface imperfections
  • Excellent adhesion
  • Prevents ingress of chlorides
  • Moisture resistant prevents blistering, peeling, cracking and staining
  • Bridges hairline cracks
  • Low VOC
  • Exceeds all the performance requirements of Federal specifications TTC-555B and TTP-1411 for waterproofing
  • Performance warranty
  • Breathable
  • Low Odor
  • Can be applied below grade on footings

StarSeal Block Fill Emulsion

Use on masonry, block and concrete to fill pores and capillaries providing a uniform sealed and primed surface for topcoating.

STARSEAL BLOCK FILL EMULSION is a styrene acrylic, high-build, emulsion coating applied to masonry block concrete to fill in the pores and capillaries and provide a uniform, sealed surface. It contains fibers, which assist in bridging holes and voids and provides an excellent bond between the substrate and subsequent top coats. Available in two versions to meet your requirements, both of which meet Federal Specification 1098-wind driven rain test: Smooth or Fibered. For a complete decorative waterproofing system topcoat with Certi-Vex HBC Smooth or StarSeal HBC Smooth Emulsion to meet TTC-555B.

BENEFITS

  • Meets all the performance requirements of Federal specification TT-F-1098 wind driven rain test
  • Flexible and durable
  • Provides an excellent bond between porous substrates and top coating
  • Apply over fresh concrete and mortar
  • Provides a uniform background and sealed surface
  • One coat application
  • Low VOC
  • Ready mixed
  • Low odor
  • Accepts most topcoats
  • Fills in pores and capillaries

 

StarSeal FC Floor Cleaner

A heavy-duty cleaner for fresh concrete that is highly effective at safely removing laitance and surface salts from fresh concrete floors.

STARSEAL FC FLOOR CLEANER is a heavy-duty cleaner for fresh concrete that is highly effective at safely removing laitance and surface salts from fresh concrete floors. This residue is often encountered after curing blankets have been removed from the concrete surface. Without removal and proper cleaning of the concrete floor, subsequent application of surface applied treatments such as alkali silicate densifiers will not perform properly. StarSeal FC Floor Cleaner is formulated as a ready-to-use, water based solution with zero VOC’s.

BENEFITS

  • High strength, effective formula
  • Contractor-friendly, water based formulation
  • Ready to use
  • Safer to use than other types of acidic cleaners
  • Will not damage cement paste
  • Aids in proper penetration and performance of alkali silicate surface treatments
  • Zero VOC

StarSeal PS Color FSR System

All the benefits of a StarSeal PS FSR floor with the addition of deep penetrating UV stable color that permanently locks into the surface.

StarSeal PS Clear Guard FSR System

Provides excellent film forming stain protection, durable wear resistance and enhanced shine to densified/hardened and polished natural and colored concrete floors.

STARSEAL PS ULTRA GUARD SPE provides excellent film forming stain protection, durable wear resistance and enhanced shine to densified/hardened and polished natural and colored concrete floors. The system provides the best and quickest stain protection while significantly increasing the gloss level and the co-efficient of friction of the treated floor. Easy and cost effective to install.

BENEFITS

  • Increase gloss and clarity
  • Quick dry-less than one hour
  • High speed burnish same day
  • Best food and chemical stain protection
  • Durable wear resistant film
  • Breathable – No hazing or whitening
  • Cost effective
  • Intensifies colored floors
  • Helps hide polishing imperfections
  • Non-slip finished floor
  • Eliminates streaking
  • Performance warranty
  • Low maintenance

StarSeal PS Clear Finish Coat FSR System

Provides long lasting non-film forming stain protection, wear resistance and shine to densified/hardened and polished natural and colored concrete floors.

STARSEAL PS FINISH COAT ULTRA FSR provides the longest lasting non-film forming stain protection and enhanced shine to densified/hardened and polished natural and colored concrete floors. The system provides long term stain and wear resistance while significantly increasing the gloss level and the co-efficient of friction of the treated floor. Since there is no wax or coating to wear off, the StarSeal PS Finish Coat Ultra FSR system, when properly installed will not require reapplication saving down time, labor and material costs.

BENEFITS

  • Excellent food and chemical stain protection
  • Long lasting – No film to wear through
  • Increase gloss and clarity
  • No reapplication needed
  • Plugs micro-pores to provide stain protection
  • Intensifies colored floors
  • Helps hide polishing imperfections
  • Non-slip finished floor
  • Performance warranty
  • Very low maintenance

StarSeal PS Clear

High solids densifier that provides a sealed and hardened surface that is low maintenance, wear and abrasion resistant. Easy and quick to apply, the product produces glossy floors without the use of a topical coating.

STARSEAL PS CLEAR enhances the natural beauty of gray and decorative concrete surfaces and produces a wear-pattern free, shine retentive permanently sealed, low-maintenance densified concrete floor. StarSeal PS Clear is a high solids potassium based silicate that rapidly penetrates without scrubbing and rinsing. Simply apply, re-distribute and re-apply until the concrete no longer absorbs the material. Once absorbed, StarSeal PS Clear reacts with the calcium hydroxide in the concrete producing a stronger more durable, dust free, superior looking and performing long lasting concrete floor.

BENEFITS

  • Long lasting and extremely durable
  • High solids forumation
  • No scrubbing or rinsing required
  • Eliminates or reduces waste stream during installation
  • Odorless, non-hazardous, USDA approved
  • Easy to clean
  • LEED points
  • Abrasion, wear resistant
  • No topical film to wear through
  • Performance warranty
  • Low maintenance. No waxing or resurfacing required

 

StarSeal Protect MFS

Magnesium fluorsilicate floor hardener and dust-proofer. Chemically bonds with concrete to produce a dense, abrasion resistant and breathable floor that is highly resistant to most acids and chemicals.

STARSEAL PROTECT MFS is a magnesium fluorosilicate hardener and dust proofer formulated to chemically bond with concrete to produce a dense, abrasion resistant and breathable floor. StarSeal Protect MFS treated floors are functional, attractive and highly resistant to most acids and chemicals.

BENEFITS

  • Chemically reacts to harden and densify
  • Extends service life of floor
  • Non-film forming reduces maintenance
  • Provides greater abrasion and chemical resistance
  • Reduces dusting
  • Protects against absorption of oils and grease

StarSeal Fusion

Invisible hole and crack repair treatment. Repair small air holes, aggregate pop-outs, voids, micro cracks, small spider cracks and similar surface imperfection.

STARSEAL FUSION is an advanced concrete repair and restoration treatment for StarSeal PS or other silicate densifying floor treatments. StarSeal Fusion will repair small air holes, aggregate pop-outs, voids, micro cracks, small spider cracks and similar surface imperfections. While other types of repair materials become brittle and discolor the surface leaving it blotchy looking, StarSeal Fusion repairs and blends into the existing color of the concrete yielding a consistent natural looking floor.

BENEFITS

  • Fills holes, cracks with same color as concrete
  • Makes repairs almost invisible
  • Cures in 1 hour for additional grinding
  • Increases gloss and clarity
  • Yields a smoother, denser surface
  • Compatible with all densifier, stain and dye systems
  • Fills early grinding scratches
  • Does not contain any pore clogging latex
  • Will work with most epoxy terrazzo and all cementitious terrazzo

StarSeal BB Sealer

High solids acrylic sealing compound that protects and enhances the appearance of burnished concrete block and architectural CMU.

STARSEAL BB SEALER is a high solid water-based acrylic sealing compound that protects and enhances burnished concrete block and architectural CMU. Apply prior to transport to protect from water penetration, scuff marks and scrapes. Once applied StarSeal BB Sealer will enhance the appearance of burnished block with a clear shinny gloss and will aid in cleaning excess mortar and construction staining.

BENEFITS

  • Protects against water penetration
  • Non-yellowing, surface remains clear
  • Seals and hardens surface, reducing clean-up and maintenance
  • Enhances appearance
  • Prevents efflorescence
  • Vexcon breathable technology-No water haze
  • Apply to damp surfaces
  • Excellent adhesion
  • Low odor

StarSeal 800

Medium gloss value priced, low odor 20% solids breathable sealer ideal for interior concrete.

STARSEAL 800 is a valued price high solids curing, sealing, hardening, dust proofing and water repellent coating. Easily to apply, StarSeal 800 quickly forms a hard, crystal clear medium gloss coating that is resistant to yellowing and many chemicals. StarSeal 800 features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

The product is ideal for both interior and exterior applications on new and existing concrete floors, stucco or brick walls, architectural sections.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Surface remains clear
  • Seals and hardens surface reducing clean-up and maintenance
  • Excellent protection against staining, attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Excellent base for adhesives
  • Meets ASTM C-309
  • Apply to damp surfaces without whitening or loss of adhesion
  • Vexcon breathable technology
  • Low odor

StarSeal 309

Low gloss economical, low odor 15% solids breathable sealer ideal for interior concrete.

STARSEAL 309 is a economical water base curing, sealing, hardening, dust proofing, and water repellent coating. StarSeal 309 forms a crystal clear low gloss coating that protects and seals new and existing concrete surfaces. StarSeal 309 features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Apply to damp surfaces without whitening or loss of adhesion
  • Meets ASTM C-309
  • Seals and hardens surface reducing clean-up and maintenance
  • Protects against staining, attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Economical
  • Low odor

Promotions/Specials

Gurad/Film Forming Sealers

Penetrating Sealer and Concrete Curing in one easy-to-use product.