Concrete Solutions for architects, engineers and builders since 1974

Certi-Vex R-Patch

Rapid setting and early strength gain structural mortar for repairs up to 6".

CERTI-VEX R-PATCH is a specially formulated single component rapid hardening, early strength gain cement based patching and repair mortar for repairs up to 6 inches in a single application. The product is ideally used for fast repairs to roadways, ramps, bridge decks, airport runways and taxiways, and parking structures. Just add water, mix and use to achieve rapid, durable and cost effective repairs to structural and general horizontal concrete.

BENEFITS

  • Fiber reinforced to reduce shrinkage cracking
  • Flowable
  • Rapid early strength gain
  • Fast return to service
  • Non-shrink
  • Good freeze/thaw resistance
  • Excellent bond, compressive and flexural strength
  • Extendable with up to 80% aggregate
  • Meets ASTM C-928 for dry packaged rapid hardening cementitious materials for concrete repairs
  • Interior and exterior use
  • Above and below grade repairs

Certi-Vex Water Plug

Single component rapid setting hydraulic cementitious water stopping mortar that provides a dense barrier to permanently seal out active water.

CERTIVEX WATER PLUG is a single component, rapid setting, hydraulic, cementitious, water stopping mortar that provides a dense barrier to permanently seal out active water. The product is polymer modified ensuring superior adhesion and bonding. When mixed with clean potable water, the material sets in 3 to 5 minutes at 70° F (21° C).

BENEFITS

  • Rapid setting
  • Stops flowing water
  • Non-shrink – 0.5% expansion
  • Sets up under water
  • Excellent freeze/thaw resistance
  • Non-metallic
  • High early strength
  • Interior and exterior use
  • Above and below grade repairs

Certi-Vex Patch V/O

Portland cement based, single component, polymer modifed, fast setting patching mortar for vertical and overhead repairs.

CERTI-VEX PATCH V/O is a portland cement based, single component, polymer modifed, fast setting non sag patching mortar specifically engineered for vertical and overhead repairs. The fast setting, low shrinkage and high strength of Certi-Vex Patch V/O allows it to be featheredged or shaved to desired shape up to 2 inch thickness in a single application. The material is easy to use, simply add water, mix and use to achieve rapid cost effective repairs.

BENEFITS

  • High compressive strength
  • Use for structural repairs
  • Non-shrink
  • Repairs up to 2 inch in depth in single lift
  • Excellent freeze/thaw resistance
  • Rapid set range 6 – 20 minute initial set
  • Interior and exterior use
  • Excellent bond, tensile and flexural strength
  • Meets ASTM C-928 for dry packaged rapid hardening cementitious materials for concrete repairs

Certi-Vex Patch FS Plus

Single component, fast setting portland cement based, polymer modified patching mortar with a corrosion inhibitor.

CERTI-VEX PATCH FS PLUS is a fast setting single component, portland cement based, polymer modified patching mortar with corrosion inhibitor designed to repair and rehabilitate a wide variety of surfaces. The fast setting, low shrinkage and high strength of Certi-Vex Patch FS Plus allows it to be featheredged or shaved to desired shape up to 2 inch thickness in a single application.

BENEFITS

  • Corrosion inhibitor for rebar & steel protection
  • Structural repairs
  • Good impact reistance
  • Repairs up to 2 inch in depth
  • Excellent freeze/thaw resistance
  • Excellent bond, tensile, compressive and flexural strengths
  • Rapid set range 6 – 20 minute initial set
  • Non-shrink
  • Meets ASTM C-928 for dry packaged rapid hardening cementitious materials for concrete repairs
  • Interior and exterior use

Certi-Vex Patch FS

Single component, fast setting portland cement based, polymer modified patching mortar for vertical, overhead and horizontal repairs up to 2".

CERTI-VEX PATCH FS is a fast setting single component, portland cement based, polymer modified patching mortar designed to repair and rehabilitate a wide variety of surfaces. The fast setting, low shrinkage and high strength of Certi-Vex Patch FS allows it to be featheredged or shaved to desired shape up to 2 inch thickness in a single application.

BENEFITS

  • Vertical, overhead and horizontal surfaces
  • Excellent strengths
  • Structural repairs
  • Good impact resistance
  • Repairs up to 2 inch in depth in single lift
  • Excellent freeze/thaw resistance
  • Rapid set range 6 – 20 minute initial set
  • Interior and exterior use
  • On grade, above and below grade repairs
  • Excellent bond, tensile and flexural strength
  • Non-shrink
  • Meets ASTM C-928 for dry packaged rapid hardening cementitious materials for concrete repairs

Certi-Vex Patch FP

Repair mortar for shallow surface defects up to 1/2".

CERTI-VEX PATCH FP uses advanced polymer modified portland cement for the patching and restoration of concrete from feather edge to ½ inch. Similar to concrete in color, Certi-Vex Patch FP is ideal for repairing of surface defects in horizontal and vertical concrete and masonry such as cracks, spalls, bugholes and shallow honeycombs. Certi-Vex Patch FP may be used in place of rubbing and sacking by coating both new and old concrete surfaces to produce a uniform texture and color.

BENEFITS

  • One component, just add water
  • Polymer fortified formulation
  • Excellent freeze/thaw resistance
  • Self curing in most applications
  • High compressive, flexural, tensile and bond strength
  • Excellent performance from feather edge to ½ inch thickness
  • Extended working time

Certi-Vex Patch AP

Fast setting general purpose mortar to repair damaged concrete. Repairs from 1/4" to 6".

CERTI-VEX PATCH AP is an ideal all purpose single component mortar for quality repairs of damaged concrete from ¼ to 6 inch thickness in a single application.The materials unique formula of special portland cements, finely graded aggregates, shrinkage compensating materials and expansive cementitious binder allow it to maintain its strength at various consistencies, from flowable to trowelable.

BENEFITS

  • Fast setting
  • Rapid early strength gain
  • Flowable
  • Repiars up to 6 inches
  • Excellent freeze/thaw resistance
  • Excellent bond, tensile and flexural strength
  • Rapid early strength gain

Certi-Vex Patch

General purpose repair of structural or cosmetic horizontal and vertical concrete.

CERTI-VEX PATCH is a single component, polymer modified portland cement based product engineered for deep repairs of concrete greater then 2 inches in depth. It provides excellent bonding, flexural and tensile strengths as well as excellent water resistance due to its low permeability. Typical applications would include patching of concrete in columns, walls, floors, loading docks, steps, swimming pools, concrete pipe and parapets.

BENEFITS

  • Quick setting
  • Excellent bonding, tensile and flexural strength
  • Excellent freeze/thaw resistance
  • Extendable with pea gravel
  • Interior and exterior use
  • Above and below grade repairs

Certi-Vex Anchor Cement

Rapid setting and hardening, high strength cementitious compound designed for anchoring and grouting.

CERTI-VEX ANCHOR CEMENT is a pourable, rapid setting and hardening, high strength non shrink, non metallic cementitious compound designed for anchoring and grouting. The materials unique formula of portland cement, finely graded aggregates, shrinkage compensating materials and expansive cementitious binder allow it to maintain its strength at various consistencies, from flowable to trowelable.

BENEFITS

  • Rapid set times 10 – 20 minutes
  • Rapid early strength gain
  • Non-shrink
  • Excellent freeze/thaw resistance
  • Excellent bond, tensile and flexural strength
  • Contains no chlorides, metals or gypsum
  • Pourable

Certi-Vex All Patch Kit

Two component, rapid setting portland cement based polymer reinforced high strength dense patching mortar for improved adhesion and durability as well as chemical resistance.

CERTI-VEX ALL PATCH is a two component, rapid setting portland cement based polymer reinforced high strength dense patching mortar. Certi-Vex All Patch makes job site repairs easy and convenient simply combine the liquid admixture with the mortar and mix. Engineered for improved adhesion and durability as well as chemical resistance to repair and rehabilitate a wide variety of concrete and masonry surfaces.

BENEFITS

  • Versatile patching mortar
  • Prepackaged and ready to use kit
  • Feather edge repairs up to 2 inches
  • Excellent freeze/thaw resistance
  • Excellent strengths
  • Fast setting
  • Increased abrasion, water and chemical resistance
  • Excellent bonding

Certi-Vex Patch RTU

One component, preblended cementitious polymer for cosmetic repair of concrete. The product comes in a tinted concrete gray color that is ready to use right out of the container. The material can be saved for future use minimizing wasted product.

CERTI-VEX PATCH RTU is a one component, ready to use preblended cementitious polymer material engineered for cosmetic repair of concrete. The product comes in a tinted concrete gray color that is ready to use right out of the container. The material is easy to use and unlike other materials unused Certi-Vex Patch RTU can be saved for future use.

Certi-Vex Patch RTU provides excellent bonding, flexural and tensile strengths and water resistance due to its unique polymer mixture. Use to repair spalls, rock pockets, honeycombs, holes, cavities or cracks in concrete or stucco with a depth not greater than 3/8” and widths from 1/16” to 3/8”. Certi-Vex Patch RTU is supplied as a sandable, trowel grade mortar and can be feather edged.

BENEFITS

  • Ready to Use
  • Reduce material waste
  • Money saving
  • Concrete gray color
  • Quick return to service
  • No primer needed
  • Easy to place, consolidate and finish
  • Can be applied to damp surfaces
  • Can be applied 3 days after placement of concrete
  • Accepts topical coatings

StarSeal Fusion

Invisible hole and crack repair treatment. Repair small air holes, aggregate pop-outs, voids, micro cracks, small spider cracks and similar surface imperfection.

STARSEAL FUSION is an advanced concrete repair and restoration treatment for StarSeal PS or other silicate densifying floor treatments. StarSeal Fusion will repair small air holes, aggregate pop-outs, voids, micro cracks, small spider cracks and similar surface imperfections. While other types of repair materials become brittle and discolor the surface leaving it blotchy looking, StarSeal Fusion repairs and blends into the existing color of the concrete yielding a consistent natural looking floor.

BENEFITS

  • Fills holes, cracks with same color as concrete
  • Makes repairs almost invisible
  • Cures in 1 hour for additional grinding
  • Increases gloss and clarity
  • Yields a smoother, denser surface
  • Compatible with all densifier, stain and dye systems
  • Fills early grinding scratches
  • Does not contain any pore clogging latex
  • Will work with most epoxy terrazzo and all cementitious terrazzo

Promotions/Specials

Gurad/Film Forming Sealers

Penetrating Sealer and Concrete Curing in one easy-to-use product.