Concrete Solutions for architects, engineers and builders since 1974
StarSeal Cure Hard
A ready to use water based residual free silicate solution that produces chemicals hardening of new concrete. May also be used as a curing aid and hardener on interior hard trowled concrete floors
STARSEAL CURE HARD is a ready to use water based residual free silicate solution that produces chemical hardening of new concrete surfaces. It is formulated with proprietary additives to encourage maximum penetration and to minimize dusting. May also be used as a curing aid and hardener on interior hard trowled concrete floors.
BENEFITS
Provides for complete development of concrete’s wear resistance and strength properties
Reduces dusting
Accepts subsequent application of water repellents
A lithium silicate hardener/denisifier that rapidly penetrates without scrubbing and rinsing producing a fully densified floor that is wear-pattern free, shine retentive permanently sealed, low-maintenance, stain-free concrete floor.
StarSeal Lithium S + with shine enhancers intensifies the natural beauty of gray and decorative concrete producing a wear-pattern free, shine retentive permanently sealed, low-maintenance concrete floor.
BENEFITS
Deep penetration
Permanently protected and sealed
No scrubbing or rinsing required
Eliminates or reduces waste stream during installation
Odorless, non-hazardous, USDA approved
Breathable and UV stable
Slip resistant
Abrasion, wear resistant
No topical film to wear through
10 year warranty
Low maintenance, no waxing or resurfacing required
Non-yellowing, low odor exterior actylate curing, sealing, hardening dust proofing water and stain repellent. Breathable medium gloss, cost effective and non-yellowing sealer ideal for exterior & existing concrete.
StarSeal 500 is a water based 100% non-yellowing acrylate curing, sealing, hardening dust proofing, and water repellent compound which meets requirements of ASTM – Type A. Easily to apply, StarSeal 500 quickly forms a hard, crystal clear film that is tough, water repellent and, stain resistant.
BENEFITS
Provides for complete development of fresh concrete’s wear resistance and strength properties
Non-Yellowing
Clear gloss surface
Apply to damp surfaces without whitening or loss of adhesion
Seals and hardens surface, reducing clean-up and maintenance costs
Excellent protection against staining, attack by alkali, oil, cleaners and common chemicals
Cost effective water based clear one-step penetrating silane water repellent, cure and seal. Cures fresh concrete while providing long term protection against damage caused by freeze/thaw, water, salts and deicer chemicals.
STARSEAL GUARD is a water base clear innovative one step penetrating silane water repellent cure and seal that can be applied to new or existing concrete. It immediately penetrates the pores and capillaries of the concrete reacting with the alkali and moisture to form a repellent hydrophobic gel in the pores and a water retentive membrane on the surface.
This membrane, which meets ASTM curing requirements and the Chloride Ion Penetration requirements of NCHRP 244 forms a film that restricts moisture loss allowing concrete to reach maximum hardness and reduces staining, chloride penetration, prevents intrusion of water, salts, deicer chemicals and acids that can result in costly damage to concrete and masonry.
This innovative one-step product eliminates the costly removal of curing compounds and time consuming water curing of fresh concrete when a protective penetrating water repellent sealer is desired. Once applied, the surface is properly cured and water repellent in one application and puts concrete into service weeks sooner.
BENEFITS
Complete projects faster
Seal & Protect against damage form salt and moisture
Seals out water, oil, grease and other stains. See TN107A
Produce Stronger, more durable and longer lasting concrete
Cures Fresh Concrete
Meets industry standards
Cost effective
Vexcon breathable technology
Deep penetration for maximum protection
Quick formation of surface repellency and chemical resistance.
Clear one component penetrating silane cure and seal. Enhances while providing long term protection against staining and damage caused by freeze/thaw, water, salts and deicer chemicals.
CERTI-VEX GUARD is a clear innovative one step penetrating silane water repellent and cure & seal product that can be applied to new or existing concrete. Available in three grades; matte, regular and high gloss, the products penetrate the pores and capillaries of the concrete reacting with the alkali and moisture to form a hydrophobic gel in the pores and a water retentive film on the surface.
This membrane, which meets ASTM curing requirements and the Chloride Ion Penetration requirements of NCHRP 244 forms a film that restricts moisture loss allowing concrete to reach maximum hardness and reduces staining, chloride penetration, prevents intrusion of water, salts, deicer chemicals and acids that can result in costly damage to concrete and masonry.
This innovative one-step product eliminates the costly removal of curing compounds and time consuming water curing of fresh concrete when a protective penetrating water repellent sealer is desired. Once applied, the surface is properly cured and water repellent is one application and puts concrete into service weeks sooner.
BENEFITS
Improves long term protection to exterior concrete from water and salt damage
Seals out water, oil, grease and other stains. See TN107A
Available in three grades, matte, regular and high gloss
Vexcon breathable technology
Cures fresh concrete
Minimizes crazing and shrinkage cracks
Deep penetration for maximum protection
Complete project faster
Reduced labor costs
Quick formation of surface repellentcy and chemical resistance
Invisible hole and crack repair treatment. Repair small air holes, aggregate pop-outs, voids, micro cracks, small spider cracks and similar surface imperfections.
Certi-Shine Fusion is an advanced concrete repair and restoration treatment for Certi-Shine Clear or other silicate densifying floor treatments. Certi-Shine Fusion will repair small air holes, aggregate pop-outs, voids, micro cracks, small spider cracks and similar surface imperfections. While other types of repair materials become brittle and discolor the surface leaving it blotchy looking, Certi-Shine Fusion repairs and blends into the existing color of the concrete yielding a consistent natural looking floor.
BENEFITS
Fills holes, cracks with same color as concrete
Makes repairs almost invisible
Cures in 1 hour for additional grinding
Increases gloss and clarity
Yields a smoother, denser surface
Compatible with all densifier, stain and dye systems
Fills early grinding scratches
Does not contain any pore clogging latex
Will work with most epoxy terrazzo and all cementitious terrazzo
Permanent shine for polished concrete - permanently protected and sealed. Simply apply, no rinsing or scrubbing required, until the concrete is fully densified. Guaranteed durability, backed by 20 year performance warranty.
CERTI-SHINE CLEAR enhances the natural beauty of polished concrete and produces a wear-pattern free, shine retentive, decorative polished concrete floor. Certi-Shine Clear is a chemically modified potassium silicate for superior rapid penetration without scrubbing and rinsing. Simply apply, re-distribute and re-apply until the concrete no longer absorbs and is fully densified. Once absorbed, Certi-Shine Clear reacts with the free lime and calcium hydroxide in concrete, producing a permanent chemical reaction that hardens, densifies and tightens the concrete surface.
BENEFITS
Chemically modified potassium silicate solution
Minimum 18% solids
Permanently protected and sealed
No scrubbing or rinsing required
Eliminates or reduces waste stream during installation
Odorless, non-hazardous, USDA approved
Meets LEED point standards for green building
Abrasion, wear resistant
No topical film to wear through
20 year warranty
Based on StarSeal PS proven technology
Low maintenance, no waxing or re-surfacing required
Protects concrete from freeze/thaw cycles, corrosive salts and extends the service life of concrete.
CERTI-VEX LINSEED ANTISPALL is an advanced formulation of 50% boiled linseed and solvents manufactured with special additives to maximize the antispalling protection of concrete. When properly applied to cured concrete, Certi-Vex Linseed Antispall acts as a barrier protecting the concrete from potential damage from freeze/thaw cycles and corrosive salts.
BENEFITS
Life expectancy of concrete greatly extended
Maximum penetration when properly applied
Protection against freeze/thaw cycles and corrosive salts
Minimizes maintenance and repair costs
Meets all standard state specification and in most areas is available pre-approved for use
High solids exterior non-yellowing curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an attractive long lasting, durable high gloss shine.
STARSEAL EF UV SUPER GLOSS is an acrylic water base, membrane forming curing, sealing, hardening and dust proofing compound for new and existing concrete surfaces. StarSeal EF UV Super Gloss leaves a clear hard protective maximum gloss coating and is an excellent cure material for long term concrete performance. The product is ideal for both interior and exterior applications on new and existing concrete floors, stucco or brick walls, architectural sections, and vertical poured walls. StarSeal EF UV Super Gloss will outlast and out perform similar products and provides excellent protection from the damaging affects of water penetration and staining and will not yellow when exposed to ultra violet light. It also will enhance the color and impart an attractive high gloss shine to colored and natural concrete surfaces.
BENEFITS
Provides for complete development of concrete’s wear resistance and strength properties
Apply to damp surfaces without whitening or loss of adhesion
Seals and hardens surface, reducing clean-up and maintenance
Excellent protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
Premium exterior non-yellowing curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an attractive long lasting high gloss shine.
STARSEAL EF UV HIGH GLOSS is a premium acrylic water base, membrane forming curing, sealing, hardening and dust proofing compound for new and existing concrete surfaces. StarSeal EF UV High Gloss leaves a clear hard protective high gloss coating and is an excellent cure material for long term concrete performance. The product is ideal for exterior applications on new and existing concrete floors, stucco or brick walls, architectural sections, and vertical poured walls. StarSeal EF UV High Gloss provides best protection from the damaging affects of water penetration and staining and will not yellow when exposed to ultra violet light. It also will enhance the color and impart an attractive high gloss shine to colored and natural concrete surfaces.
BENEFITS
Provides for complete development of concrete’s wear resistance and strength properties
Apply to damp surfaces without whitening or loss of adhesion
Seals and hardens surface, reducing clean-up and maintenance
Best protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
Exterior non-yellowing curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an attractive gloss shine.
STARSEAL EF UV GLOSS is an acrylic water base, membrane forming curing, sealing, hardening and dust proofing compound for new and existing concrete surfaces. StarSeal EF UV Gloss leaves a clear hard protective gloss finish coating and is an excellent cure material for long term concrete performance. The product is ideal for exterior applications on new and existing concrete floors, stucco or brick walls, architectural sections, and vertical poured walls. StarSeal EF UV Gloss provides better protection from the damaging affects of water penetration and staining and will not yellow when exposed to ultra violet light. It also will enhance the color and impart an attractive vibrant shine to colored and natural concrete surfaces.
BENEFITS
Provides for complete development of concrete’s wear resistance and strength properties
Apply to damp surfaces without whitening or loss of adhesion
Seals and hardens surface, reducing clean-up and maintenance
Better protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
Ready to use curing and sealing compound for new and existing concrete surfaces. Leaves a clear hard protective matte finish coating and is an excellent cure material for long term concrete performance.
STARSEAL EF UV FLAT is an acrylic water base, membrane forming curing, sealing, hardening and dust proofing compound for new and existing concrete surfaces. StarSeal EF UV Flat leaves a clear hard protective matte finish coating and is an excellent cure material for long term concrete performance. The product is ideal for both exterior applications on new and existing concrete floors, stucco or brick walls, architectural sections, and vertical poured walls. StarSeal EF UV Flat provides better protection from the damaging affects of water penetration and staining and will not yellow when exposed to ultra violet light.
BENEFITS
Provides for complete development of concrete’s wear resistance and strength properties
Apply to damp surfaces without whitening or loss of adhesion
Seals and hardens surface, reducing clean-up and maintenance
Better protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
Ready to use colored curing and sealing compound for new and existing concrete surfaces. StarSeal EF Stain leaves a uniform color and long lasting protective coating and is an excellent cure material for long term concrete performance.
STARSEAL EF STAIN is a ready to use colored curing and sealing compound for new and existing concrete surfaces. StarSeal EF Stain leaves a uniform color and long lasting protective coating and is an excellent cure material for long term concrete performance. The product is ideal for both interior and exterior applications on new and existing concrete floors, stucco or brick walls, architectural sections, and vertical poured walls.
StarSeal EF Stain hardens to a wear and stain resistant coating that enhances and revitalizes the appearance of new and existing concrete. The coating is also ideal for correcting color variations in colored concrete.
BENEFITS
Available in standard and custom colors
Provides for complete development of concrete’s wear resistance and strength properties
Apply to damp surfaces without whitening or loss of adhesion
Seals and hardens surface, reducing clean-up and maintenance
Excellent protection against staining, attack by alkali, oil, cleaners and common industrial chemicals
Value priced curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an semi-gloss shine.
STARSEAL EF MEDIUM GLOSS is a value priced water base, membrane forming curing, sealing, hardening and dust proofing compound for new and existing concrete surfaces. StarSeal EF Medium Gloss leaves a clear hard protective coating and is an excellent cure material for long term concrete performance. The product is ideal for interior applications on new and existing concrete floors. StarSeal EF Medium Gloss provides better protection from the damaging affects of water penetration and staining. It also will enhance the color and impart an attractive semi-gloss shine to colored and natural concrete surfaces.
BENEFITS
Provides for complete development of concrete’s wear resistance and strength properties
Apply to damp surfaces without whitening or loss of adhesion
Seals and hardens surface, reducing clean-up and maintenance
Better protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
Premium curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an attractive long lasting high gloss shine.
STARSEAL EF HIGH GLOSS is an premium water base, membrane forming curing, sealing, hardening and dust proofing compound for new and existing concrete surfaces. StarSeal EF High Gloss leaves a clear hard protective coating and is an excellent cure material for long term concrete performance. The product is ideal for interior applications on new and existing concrete floors. StarSeal EF High Gloss provides best protection from the damaging affects of water penetration and staining. It also will enhance the color and impart an attractive high gloss shine to colored and natural concrete surfaces.
BENEFITS
Provides for complete development of concrete’s wear resistance and strength properties
Apply to damp surfaces without whitening or loss of adhesion
Seals and hardens surface, reducing clean-up and maintenance
Best protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
All the benefits of a StarSeal PS FSR floor with the addition of deep penetrating UV stable color that permanently locks into the surface.
STARSEAL PS ULTRA STAIN provides all the benefits of a StarSeal PS FSR floor with the addition of deep penetrating UV stable color that permanently locks into the surface.
Provides excellent film forming stain protection, durable wear resistance and enhanced shine to densified/hardened and polished natural and colored concrete floors.
STARSEAL PS ULTRA GUARD SPE provides excellent film forming stain protection, durable wear resistance and enhanced shine to densified/hardened and polished natural and colored concrete floors. The system provides the best and quickest stain protection while significantly increasing the gloss level and the co-efficient of friction of the treated floor. Easy and cost effective to install.
Provides long lasting non-film forming stain protection, wear resistance and shine to densified/hardened and polished natural and colored concrete floors.
STARSEAL PS FINISH COAT ULTRA FSR provides the longest lasting non-film forming stain protection and enhanced shine to densified/hardened and polished natural and colored concrete floors. The system provides long term stain and wear resistance while significantly increasing the gloss level and the co-efficient of friction of the treated floor. Since there is no wax or coating to wear off, the StarSeal PS Finish Coat Ultra FSR system, when properly installed will not require reapplication saving down time, labor and material costs.