Concrete Solutions for architects, engineers and builders since 1974

StarSeal Cure Hard

A ready to use water based residual free silicate solution that produces chemicals hardening of new concrete. May also be used as a curing aid and hardener on interior hard trowled concrete floors

STARSEAL CURE HARD is a ready to use water based residual free silicate solution that produces chemical hardening of new concrete surfaces. It is formulated with proprietary additives to encourage maximum penetration and to minimize dusting. May also be used as a curing aid and hardener on interior hard trowled concrete floors.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Reduces dusting
  • Accepts subsequent application of water repellents
  • Allows for bonding of all floor finishes
  • Low maintenance finished surface
  • Cure Aid
  • Economical

StarSeal 500

Non-yellowing, low odor exterior actylate curing, sealing, hardening dust proofing water and stain repellent. Breathable medium gloss, cost effective and non-yellowing sealer ideal for exterior & existing concrete.

StarSeal 500 is a water based 100% non-yellowing acrylate curing, sealing, hardening dust proofing, and water repellent compound which meets requirements of ASTM – Type A. Easily to apply, StarSeal 500 quickly forms a hard, crystal clear film that is tough, water repellent and, stain resistant.

BENEFITS

  • Provides for complete development of fresh concrete’s wear resistance and strength properties
  • Non-Yellowing
  • Clear gloss surface
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface, reducing clean-up and maintenance costs
  • Excellent protection against staining, attack by alkali, oil, cleaners and common chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Economical
  • Recoatable
  • Low odor

StarSeal Guard

Cost effective water based clear one-step penetrating silane water repellent, cure and seal. Cures fresh concrete while providing long term protection against damage caused by freeze/thaw, water, salts and deicer chemicals.

STARSEAL GUARD is a water base clear innovative one step penetrating silane water repellent cure and seal that can be applied to new or existing concrete. It immediately penetrates the pores and capillaries of the concrete reacting with the alkali and moisture to form a repellent hydrophobic gel in the pores and a water retentive membrane on the surface.

This membrane, which meets ASTM curing requirements and the Chloride Ion Penetration requirements of NCHRP 244 forms a film that restricts moisture loss allowing concrete to reach maximum hardness and reduces staining, chloride penetration, prevents intrusion of water, salts, deicer chemicals and acids that can result in costly damage to concrete and masonry.

This innovative one-step product eliminates the costly removal of curing compounds and time consuming water curing of fresh concrete when a protective penetrating water repellent sealer is desired. Once applied, the surface is properly cured and water repellent in one application and puts concrete into service weeks sooner.

BENEFITS

  • Complete projects faster
  • Seal & Protect against damage form salt and moisture
  • Seals out water, oil, grease and other stains. See TN107A
  • Produce Stronger, more durable and longer lasting concrete
  • Cures Fresh Concrete
  • Meets industry standards
  • Cost effective
  • Vexcon breathable technology
  • Deep penetration for maximum protection
  • Quick formation of surface repellency and chemical resistance.
  • Low odor

Certi-Vex Guard

Clear one component penetrating silane cure and seal. Enhances while providing long term protection against staining and damage caused by freeze/thaw, water, salts and deicer chemicals.

CERTI-VEX GUARD is a clear innovative one step penetrating silane water repellent and cure & seal product that can be applied to new or existing concrete.  Available in three grades; matte, regular and high gloss, the products penetrate the pores and capillaries of the concrete reacting with the alkali and moisture to form a hydrophobic gel in the pores and a water retentive film on the surface.

This membrane, which meets ASTM curing requirements and the Chloride Ion Penetration requirements of NCHRP 244 forms a   film that restricts moisture loss allowing concrete to reach maximum hardness and reduces staining, chloride penetration, prevents intrusion of water, salts, deicer chemicals and acids that can result in costly damage to concrete and masonry.

This innovative one-step product eliminates the costly removal of curing compounds and time consuming water curing of fresh concrete when a protective penetrating water repellent sealer is desired. Once applied, the surface is properly cured and water repellent is one application and puts concrete into service weeks sooner.

BENEFITS

  • Improves long term protection to exterior concrete from water and salt damage
  • Seals out water, oil, grease and other stains. See TN107A
  • Available in three grades, matte, regular and high gloss
  • Vexcon breathable technology
  • Cures fresh concrete
  • Minimizes crazing and shrinkage cracks
  • Deep penetration for maximum protection
  • Complete project faster
  • Reduced labor costs
  • Quick formation of surface repellentcy and chemical resistance
  • Non-yellowing

StarSeal EF UV Super Gloss

High solids exterior non-yellowing curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an attractive long lasting, durable high gloss shine.

STARSEAL EF UV SUPER GLOSS is an acrylic water base, membrane forming curing, sealing, hardening and dust proofing compound for new and existing concrete surfaces. StarSeal EF UV Super Gloss leaves a clear hard protective maximum gloss coating and is an excellent cure material for long term concrete performance. The product is ideal for both interior and exterior applications on new and existing concrete floors, stucco or brick walls, architectural sections, and vertical poured walls. StarSeal EF UV Super Gloss will outlast and out perform similar products and provides excellent protection from the damaging affects of water penetration and staining and will not yellow when exposed to ultra violet light. It also will enhance the color and impart an attractive high gloss shine to colored and natural concrete surfaces.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface, reducing clean-up and maintenance
  • Excellent protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Longest lasting

StarSeal EF UV High Gloss

Premium exterior non-yellowing curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an attractive long lasting high gloss shine.

STARSEAL EF UV HIGH GLOSS is a premium acrylic water base, membrane forming curing, sealing, hardening and dust proofing compound for new and existing concrete surfaces. StarSeal EF UV  High Gloss leaves a clear hard protective high gloss coating and is an excellent cure material for long term concrete performance. The product is ideal for exterior applications on new and existing concrete floors, stucco or brick walls, architectural sections, and vertical poured walls. StarSeal EF UV High Gloss provides best protection from the damaging affects of water penetration and staining and will not yellow when exposed to ultra violet light. It also will enhance the color and impart an attractive high gloss shine to colored and natural concrete surfaces.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface, reducing clean-up and maintenance
  • Best protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Non-yellowing
  • Long lasting

StarSeal EF UV Gloss

Exterior non-yellowing curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an attractive gloss shine.

STARSEAL EF UV GLOSS is an acrylic water base, membrane forming curing, sealing, hardening and dust proofing compound for new and existing concrete surfaces. StarSeal EF UV Gloss leaves a clear hard protective gloss finish coating and is an excellent cure material for long term concrete performance. The product is ideal for exterior applications on new and existing concrete floors, stucco or brick walls, architectural sections, and vertical poured walls. StarSeal EF UV Gloss provides better protection from the damaging affects of water penetration and staining and will not yellow when exposed to ultra violet light. It also will enhance the color and impart an attractive vibrant shine to colored and natural concrete surfaces.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface, reducing clean-up and maintenance
  • Better protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Non-yellowing

StarSeal EF UV Flat

Ready to use curing and sealing compound for new and existing concrete surfaces. Leaves a clear hard protective matte finish coating and is an excellent cure material for long term concrete performance.

STARSEAL EF UV FLAT is an acrylic water base, membrane forming curing, sealing, hardening and dust proofing compound for new and existing concrete surfaces. StarSeal EF UV Flat leaves a clear hard protective matte finish coating and is an excellent cure material for long term concrete performance. The product is ideal for both exterior applications on new and existing concrete floors, stucco or brick walls, architectural sections, and vertical poured walls. StarSeal EF UV Flat provides better protection from the damaging affects of water penetration and staining and will not yellow when exposed to ultra violet light.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface, reducing clean-up and maintenance
  • Better protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Attractive clear matte finish
  • UV protecti

StarSeal EF Stain

Ready to use colored curing and sealing compound for new and existing concrete surfaces. StarSeal EF Stain leaves a uniform color and long lasting protective coating and is an excellent cure material for long term concrete performance.

STARSEAL EF STAIN is a ready to use colored curing and sealing compound for new and existing concrete surfaces. StarSeal EF Stain leaves a uniform color and long lasting protective coating and is an excellent cure material for long term concrete performance. The product is ideal for both interior and exterior applications on new and existing concrete floors, stucco or brick walls, architectural sections, and vertical poured walls.

StarSeal EF Stain hardens to a wear and stain resistant coating that enhances and revitalizes the appearance of new and existing concrete.  The coating is also ideal for correcting color variations in colored concrete.

BENEFITS

  • Available in standard and custom colors
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface, reducing clean-up and maintenance
  • Excellent protection against staining, attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Non-fading
  • Revitalizes old, stained or uncolored concrete
  • Corrects variations in colored concrete

StarSeal EF Medium Gloss

Value priced curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an semi-gloss shine.

STARSEAL EF MEDIUM GLOSS is a value priced water base, membrane forming curing, sealing, hardening and dust proofing compound for new and existing concrete surfaces. StarSeal EF Medium Gloss leaves a clear hard protective coating and is an excellent cure material for long term concrete performance. The product is ideal for interior applications on new and existing concrete floors. StarSeal EF Medium Gloss provides better protection from the damaging affects of water penetration and staining. It also will enhance the color and impart an attractive semi-gloss shine to colored and natural concrete surfaces.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface, reducing clean-up and maintenance
  • Better protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Value priced

StarSeal EF High Gloss

Premium curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an attractive long lasting high gloss shine.

STARSEAL EF HIGH GLOSS is an premium water base, membrane forming curing, sealing, hardening and dust proofing compound for new and existing concrete surfaces. StarSeal EF High Gloss leaves a clear hard protective coating and is an excellent cure material for long term concrete performance. The product is ideal for interior applications on new and existing concrete floors. StarSeal EF High Gloss provides best protection from the damaging affects of water penetration and staining. It also will enhance the color and impart an attractive high gloss shine to colored and natural concrete surfaces.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface, reducing clean-up and maintenance
  • Best protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Long lasting

Certi-Vex Re-Seal It

Improves the appearance of aged or weathered previously sealed concrete surfaces. The product "melts" into the existing sealer binding the new sealer coat to the existing sealer.

CERTI-VEX RE-SEAL IT is specifically designed to improve the appearance of aged or weathered previously sealed concrete surfaces.The products low viscosity allows for easier application, better breathability and adhesion to the existing sealer.

BENEFITS

  • Non-Yellowing
  • Fast drying
  • Rejuvenates old and worn surfaces
  • Easy to use
  • VOC compliant

Certi-Vex Guard CACS

Colored one component penetrating silane cure and seal. Enhances while providing long term protection against staining and damage caused by freeze/thaw, water, salts and deicer chemicals.

CERTI-VEX GUARD CACS is a colored, ready to use, breathable one-step penetrating silane water repellent cure and seal that provides maximum long term protection and a decorative appearance to concrete and masonry surfaces. Water and dissolved salts bead after 24 hours, Chloride Ion intrusion is reduced; protects against staining and damage caused by water, salts, deicer chemicals and acids. Applied on new or existing horizontal and vertical surfaces, it immediately penetrates the pores and capillaries of the concrete, reacting with the alkali and moisture to form a hydrophobic gel in the pores and a colored water retentive coating which seals the surface.

This innovative one-step product eliminates the costly removal of curing compounds and time consuming water curing of fresh concrete when a protective penetration water repellent sealer is desired. Once applied, the surface is properly cured and water repellent in on application and puts concrete into service weeks sooner.

BENEFITS

  • Improves long term protection to exterior concrete from water and salt damage
  • Enhances surface appearance
  • Available in 50 standard plus custom colors. See Vexcon’s Color Systems Chart
  • Vexcon breathable technology
  • Cures fresh concrete
  • Minimizes crazing and shrinkage cracks
  • Deep penetration for maximum protection
  • Complete projects faster
  • Reduced labor costs
  • Quick formation of surface repellency and chemical resistance
  • Non-yellowing
  • Excellent color retention (fade resistant)

Certi-Vex Aggregate Sealer AIM

Low VOC pigmented sealer for exposed aggregate concrete surfaces. The product contains special earth tone (brown) pigments which highlight and enhance the natural color of the expose aggregate.

CERTI-VEX AGGREGATE SEALER AIM is a ready to use low VOC high gloss non-yellowing film forming sealer specifically designed to improve the performance and appearance of exposed aggregate surfaces. The product contains special earth tone pigments which deepen and enriches the color of the aggregate. Certi-Vex Aggregate Sealer AIM provides excellent surface protection from the damaging effects of water penetration, staining and everyday use.

BENEFITS

  • Low VOC <350 grams/liter
  • High gloss wet look
  • Deepens and enriches the color of the stone aggregate
  • UV Resistant – Non Yellowing
  • Meets ASTM C-1315 Type 1 Class A
  • Breathable sealer
  • Quick drying
  • Available in two tints, Walnut Brown and Limestone Gray
  • Aggregate pop out as a result fo freeze/thaw is virtually eliminated without effecting texture of treated surface
  • Provides improved resistance from the damaging affects of water, freeze thaw, staining and traffic

Certi-Vex Aggregate Sealer

Pigmented sealer for exposed aggregate concrete surfaces. The product contains special earth tone (brown) pigments which highlight the natural color of the aggregate enhancing the aggregate appearance.

CERTI-VEX AGGREGATE SEALER is a ready to use high gloss non-yellowing film forming sealer specifically designed to improve the performance and appearance of exposed aggregate surfaces. The product contains special earth tone pigments which deepen and enriches the color of the aggregate. Certi-Vex Aggregate Sealer provides excellent surface protection from the damaging effects of water penetration, staining and everyday use.

BENEFITS

  • High gloss wet look
  • Deepens and enriches the color of the stone aggregate
  • UV Resistant – Non Yellowing
  • Meets ASTM C-1315 Type 1 Class A
  • Breathable sealer
  • Quick drying
  • Available in two tints, Walnut Brown and Limestone Gray
  • Aggregate pop out as a result fo freeze/thaw is virtually eliminated without effecting texture of treated surface
  • Provides improved resistance from the damaging affects of water, freeze thaw, staining and traffic

Certi-Vex AC 1315 Concrete Stain

Enhances and revitalizes new and existing concrete with a hardened, wear resistant surface. Deep penetrating for uniform and long lasting color.

CERTI-VEX AC 1315 CONCRETE STAIN is a solvent base ready to use colored curing and sealing coating. The product quickly hardens to a wear resistant protective coating that enhances and revitalizes the appearance of new or existing concrete with an attractive, durable uniform color appearance. Certi-Vex AC 1315 Concrete Stain features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

The product is ideal for exterior applications, stamped and decorated concrete, concrete pavers, stucco or brick walls, architectural sections and colored concrete to even out color variations.

BENEFITS

  • Available in 15 standard and custom colors
  • Economical decorative coating
  • Revitalizes old, stained or uncolored concrete
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-1315 Type 2 Class B
  • Seals and hardens surface reducing clean-up and maintenance
  • Excellent protection against staining, attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Corrects variations in colored concrete
  • Apply to damp surfaces without whitening or loss of adhesion
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 1315 Beading Flat

Breathable clear coating that seals and protects horizontal and vertical surfaces with a flat finish.

CERTI-VEX AC 1315 BEADING FLAT is a solvent base cure and seal coating that enhances new a existing concrete surfaces with a low sheen/matte appearance. The product is non yellowing and protects against water and salt penetration as well as staining. Certi-Vex AC1315 Beading Flat features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

Ideal for applications where a non-yellowing semi-gloss matte appearance is desired on horizontal or vertical concrete masonry, stamped and decorative concrete surfaces.

BENEFITS

  • Matte appearance
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Non-Yellowing
  • Meets ASTM C-1315 Type 1 Class A
  • Seals and hardens surface reducing clean up and maintenance
  • Excellent stain protection against attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Apply to damp surfaces without whitening or loss of adhesion
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 1315 HG

Breathable high solids clear sealer that enhances and protects exterior concrete with a longer lasting non yellowing high gloss finish.

CERTI-VEX AC 1315 HG is a premium high gloss ready to use solvent base cure and seal coating for new and existing concrete surfaces. Certi-Vex AC 1315 HG leaves a protective coating and is an excellent cure material for long term concrete performance. Certi-Vex AC 1315 HG provides better protection from the damaging effects of water penetration and staining. It also will enhance the color and impart an attractive high gloss to colored and natural concrete surfaces. Certi-Vex AC HG features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

The product is designed for use on exterior above and below grade architectural concrete where a long lasting, high gloss shine is required.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Non-yellowing
  • High Gloss
  • Meets ASTM C-1315 Type 1 Class A
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface reducing clean-up and maintenance
  • Better protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 1315

Breathable clear sealer that enhances and protects exterior concrete with a non yellowing, durable gloss finish.

CERTI-VEX AC 1315 is a solvent base cure and seal coating for new and existing concrete surfaces. Certi-Vex AC 1315 leaves a clear protective coating and is an excellent cure material for long term concrete performance. Certi-Vex AC 1315 Super Seal provides good protection from the damaging effects of water penetration and staining. It also will enhance the color and impart an attractive gloss to colored and natural concrete surfaces. Certi-Vex AC 1315 feature Vexcon’s breathable technology which allows moisture vapor to pass through rather than  becoming trapped, preventing whitening, peeling and flaking.

The product is designed for use on exterior above and below grade architectural concrete where a premium, long lasting, vibrant gloss and shine is required.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Non-yellowing
  • Meets ASTM C-1315 Type 1 Class A
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface reducing clean-up and maintenance
  • Good protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Fast drying
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)
  • Surfaces look newer and brighter

Certi-Vex AC 30%

Cost effective 30% solids breathable clear sealer that enhances and protects concrete with a long lasting UV resistent high gloss finish.

CERTI-VEX AC 30 is a high gloss ready to use solvent base cure and seal coating for new and existing concrete surfaces. Certi-Vex AC 30 leaves a protective coating and is an excellent cure material for long term concrete performance. Certi-Vex AC 30 provides better protection from the damaging effects of water penetration and staining. It also will enhance the color and impart a high gloss to colored and natural concrete surfaces. Certi-Vex AC 30 features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

The product is designed for use on exterior above and below grade architectural concrete where a long lasting, high gloss shine is required.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • High Gloss
  • Meets ASTM C-1315 Type 1 Class B
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface reducing clean-up and maintenance
  • Better protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Promotions/Specials

Gurad/Film Forming Sealers

Penetrating Sealer and Concrete Curing in one easy-to-use product.