Concrete Solutions for architects, engineers and builders since 1974

MoistureBloc One Step

Economical one coat application reduces moisture vapor readings as high as 10 to under 3 lbs. (RH 80%). Adhesive ready in 12 hours.

MOISTUREBLOC ONE STEP is a water base one component, economical vapor reduction product based on unique breathable technology which prevents and protects against floor adhesive failure on concrete surfaces containing elevated levels of moisture vapor. When applied prior to the installation of floor covering materials such as VCT, carpet, linoleum, vinyl and wood the product is guaranteed to reduce moisture vapor emissions (MVER) from as high as 10/# per ASTM F-1869 calcium chloride test results to below 3.0#/1000 sq. ft./24hrs. MoistureBloc One Step is an easy to use one coat application and due to its superior penetration and adhesion does not require extensive surface preparation or surface profiling such as shot blasting and can be applied to damp, tightly finished or densified surfaces.

MoistureBloc One Step can be applied to existing and newly place concrete surfaces properly curing the concrete for fast track project completion and quick installation of floor covering material.

BENEFITS

  • Reduces moisture vapor readings up to 10 lbs. to under 3 lbs.
  • Adhesive ready in 12 hours
  • Easy one coat application
  • Does not require shot blasting or other mechanical surface preparation
  • Low odor
  • Resistant to acids, alkalis and reduces the moisture environment which allows mold and   fungus to grow
  • Low installed cost
  • Cures new concrete for fast installation
  • Apply to damp and new concrete surfaces
  • Full floor warranty

MoistureBloc Vapor Reduction System (VRS) FT AIM

Low VOC cost effect, fast track installation reduces moisture vapor readings ranging from 10-19 to under 3 lbs. Can be used with reactive and non reactive adhesives.

MoistureBloc Vapor Reduction System (VRS) FT

Cost effect, fast track installation reduces moisture vapor readings ranging from 10-19 to under 3 lbs. Can be used with reactive and non reactive adhesives.

MoistureBloc MX AIM System

Low VOC maximum protection against flooring adhesive failure caused from moisture vapor in concrete. Guaranteed to reduce 27/# calcium chloride test to below 3.0#/ 1000 sq. ft./24hrs.(RH 99%).

MOISTUREBLOC MX AIM System low VOC, prevents and protects against floor adhesive failure on concrete surfaces containing elevated levels of moisture vapor. Applied prior to the installation of floor covering materials such as VCT, carpet, linoleum, vinyl and wood the system is guaranteed to reduce moisture vapor emissions (MVER) from as high as 27/# per ASTM F-1869 calcium chloride test results to below 3.0#/1000 sq. ft./24hrs. The product can be applied to concrete slabs with relative humidity (RH) up to 99% per ASTM F-2420.

The MoistureBloc MX AIM system can be applied to existing and newly place concrete surfaces properly curing the concrete for fast track project completion and quick installation of floor covering material.

BENEFITS

  • Reduces moisture vapor readings up to 27 lbs. to under 3 lbs.
  • Solvent base – Low VOC
  • Cost effective
  • Does not require shot blasting or other costly mechanical surface preparation
  • Eliminates adhesive failure caused by moisture vapor and alkaline salt attack
  • Effective mold and mildew blocker
  • Low VOC
  • Can be used with reactive and non reactive adhesives
  • Apply to damp and new concrete surfaces
  • Application rate does not vary based on pre-application tests results
  • Full floor warranty

MoistureBloc MX System

Maximum protection against flooring adhesive failure caused from moisture vapor in concrete. Guaranteed to reduce 27/# calcium chloride test to below 3.0#/ 1000 sq. ft./24hrs.(RH 99%).

MOISTUREBLOC MX System prevents and protects against floor adhesive failure on concrete surfaces containing elevated levels of moisture vapor. Applied prior to the installation of floor covering materials such as VCT, carpet, linoleum, vinyl and wood the system is guaranteed to reduce moisture vapor emissions (MVER) from as high as 27/# per ASTM F-1869 calcium chloride test results to below 3.0#/1000 sq. ft./24hrs. The product can be applied to concrete slabs with relative humidity (RH) up to 99% per ASTM F-2420.

The MoistureBloc MX System can be applied to existing and newly place concrete surfaces properly curing the concrete for fast track project completion and quick installation of floor covering material.

BENEFITS

  • Reduces moisture vapor readings up to 27 lbs. to under 3 lbs.
  • Cost effective
  • Does not require shot blasting or other costly mechanical surface preparation
  • Eliminates adhesive failure caused by moisture vapor and alkaline salt attack
  • Effective mold and mildew blocker
  • Can be used with reactive and non reactive adhesives
  • Apply to damp and new concrete surfaces
  • Application rate does not vary based on pre-application tests results
  • Full floor warranty

MoistureBloc Vapor Reduction System (VRS) Emulsion

Cost effective easy two step application reduces moisture vapor readings ranging from 10-15 to under 3lbs. Can be used with reactive and non reactive adhesives.

MoistureBloc Universal

One coat application reduces moisture vapor readings ranging from 8 to under 3 lbs. Use with reactive and non reactive adhesives. Meets all California VOC regulations and LEED point standards. Adhesive ready in 12 hours.

MOISTUREBLOC UNIVERSAL is a water base one component, economical vapor reduction product based on unique breathable technology which prevents and protects against floor adhesive failure on concrete surfaces containing elevated levels of moisture vapor. MoistureBloc Universal is ideal for use with urethane and epoxy reactive adhesives. When applied prior to the installation of floor covering materials such as VCT, carpet, linoleum, vinyl and wood the system is guaranteed to reduce moisture vapor emissions (MVER) from as high as 8/# per ASTM F-1869 calcium chloride test results to below 3.0#/1000 sq. ft./24hrs. MoistureBloc Universal is an easy to use one coat application and due to its superior penetration and adhesion does not require extensive surface preparation or surface profiling such as shot blasting and can be applied to damp, tightly finished or densified surfaces.

MoistureBloc Universal can be applied to existing and newly place concrete surfaces properly curing the concrete for fast track project completion and quick installation of floor covering material.

BENEFITS

  • Reduces moisture vapor readings up to 8 lbs. to under 3 lbs.
  • Ideal for reactive adhesives
  • Adhesive ready in 12 hours
  • Easy one coat application
  • Does not require shot blasting or other mechanical surface preparation
  • Low odor
  • Resistant to acids, alkalis and reduces the moisture environment which allows mold and fungus to grow
  • Low installed cost
  • Cures new concrete for fast installation.
  • Apply to damp and new concrete surfaces
  • Full floor warranty

MoistureBloc MX Emulsion System

Maximum protection against flooring adhesive failure caused from moisture vapor in concrete. Guaranteed to reduce 27/# calcium chloride test to below 3.0#/ 1000 sq. ft./24hrs.(RH 99%).

Moisturebloc MX Emulsion System prevents and protects against floor adhesive failure on concrete surfaces containing elevated levels of moisture vapor. Applied prior to the installation of floor covering materials such as VCT, carpet, linoleum, vinyl and wood the system is guaranteed to reduce moisture vapor emissions (MVER) from as high as 27/# per ASTM F-1869 calcium chloride test results to below 3.0#/1000 sq. ft./24hrs. The product can be applied to concrete slabs with relative humidity (RH) up to 99% per ASTM F-2420.

The MoistureBloc MX Emulsion system can be applied to existing and newly place concrete surfaces properly curing the concrete for fast track project completion and quick installation of floor covering material.

BENEFITS

  • Reduces moisture vapor readings up to 27 lbs. to under 3 lbs.
  • Cost effective
  • Low odor
  • Does not require shot blasting or other costly mechanical surface preparation
  • Eliminates adhesive failure caused by moisture vapor and alkaline salt attack
  • Effective mold and mildew blocker
  • Low VOC
  • Can be used with reactive and non reactive adhesives
  • Apply to damp and new concrete surfaces
  • Application rate does not vary based on pre-application tests results
  • Full floor warranty

Promotions/Specials

Please check back for future specials.