Certi-Shine MicroStain System
This system includes all the features and benefits of Certi-Shine Clear FSR with the addition of permanent color.
- Specifications Warranty Other Info. Product Video
This system includes all the features and benefits of Certi-Shine Clear FSR with the addition of permanent color.
Certi-Shine Fusion is an advanced concrete repair and restoration treatment for Certi-Shine Clear or other silicate densifying floor treatments. Certi-Shine Fusion will repair small air holes, aggregate pop-outs, voids, micro cracks, small spider cracks and similar surface imperfections. While other types of repair materials become brittle and discolor the surface leaving it blotchy looking, Certi-Shine Fusion repairs and blends into the existing color of the concrete yielding a consistent natural looking floor.
This system includes the features and benefits of Certi-Shine Clear with added resistance to food stains such as vinegar, milk and citric acids.
CERTI-SHINE CLEAR enhances the natural beauty of polished concrete and produces a wear-pattern free, shine retentive, decorative polished concrete floor. Certi-Shine Clear is a chemically modified potassium silicate for superior rapid penetration without scrubbing and rinsing. Simply apply, re-distribute and re-apply until the concrete no longer absorbs and is fully densified. Once absorbed, Certi-Shine Clear reacts with the free lime and calcium hydroxide in concrete, producing a permanent chemical reaction that hardens, densifies and tightens the concrete surface.
MOISTUREBLOC ONE STEP is a water base one component, economical vapor reduction product based on unique breathable technology which prevents and protects against floor adhesive failure on concrete surfaces containing elevated levels of moisture vapor. When applied prior to the installation of floor covering materials such as VCT, carpet, linoleum, vinyl and wood the product is guaranteed to reduce moisture vapor emissions (MVER) from as high as 10/# per ASTM F-1869 calcium chloride test results to below 3.0#/1000 sq. ft./24hrs. MoistureBloc One Step is an easy to use one coat application and due to its superior penetration and adhesion does not require extensive surface preparation or surface profiling such as shot blasting and can be applied to damp, tightly finished or densified surfaces.
MoistureBloc One Step can be applied to existing and newly place concrete surfaces properly curing the concrete for fast track project completion and quick installation of floor covering material.
Low VOC cost effect, fast track installation reduces moisture vapor readings ranging from 10-19 to under 3 lbs. Can be used with reactive and non reactive adhesives.
Cost effect, fast track installation reduces moisture vapor readings ranging from 10-19 to under 3 lbs. Can be used with reactive and non reactive adhesives.
MOISTUREBLOC MX AIM System low VOC, prevents and protects against floor adhesive failure on concrete surfaces containing elevated levels of moisture vapor. Applied prior to the installation of floor covering materials such as VCT, carpet, linoleum, vinyl and wood the system is guaranteed to reduce moisture vapor emissions (MVER) from as high as 27/# per ASTM F-1869 calcium chloride test results to below 3.0#/1000 sq. ft./24hrs. The product can be applied to concrete slabs with relative humidity (RH) up to 99% per ASTM F-2420.
The MoistureBloc MX AIM system can be applied to existing and newly place concrete surfaces properly curing the concrete for fast track project completion and quick installation of floor covering material.
MOISTUREBLOC MX System prevents and protects against floor adhesive failure on concrete surfaces containing elevated levels of moisture vapor. Applied prior to the installation of floor covering materials such as VCT, carpet, linoleum, vinyl and wood the system is guaranteed to reduce moisture vapor emissions (MVER) from as high as 27/# per ASTM F-1869 calcium chloride test results to below 3.0#/1000 sq. ft./24hrs. The product can be applied to concrete slabs with relative humidity (RH) up to 99% per ASTM F-2420.
The MoistureBloc MX System can be applied to existing and newly place concrete surfaces properly curing the concrete for fast track project completion and quick installation of floor covering material.
Cost effective easy two step application reduces moisture vapor readings ranging from 10-15 to under 3lbs. Can be used with reactive and non reactive adhesives.
MOISTUREBLOC UNIVERSAL is a water base one component, economical vapor reduction product based on unique breathable technology which prevents and protects against floor adhesive failure on concrete surfaces containing elevated levels of moisture vapor. MoistureBloc Universal is ideal for use with urethane and epoxy reactive adhesives. When applied prior to the installation of floor covering materials such as VCT, carpet, linoleum, vinyl and wood the system is guaranteed to reduce moisture vapor emissions (MVER) from as high as 8/# per ASTM F-1869 calcium chloride test results to below 3.0#/1000 sq. ft./24hrs. MoistureBloc Universal is an easy to use one coat application and due to its superior penetration and adhesion does not require extensive surface preparation or surface profiling such as shot blasting and can be applied to damp, tightly finished or densified surfaces.
MoistureBloc Universal can be applied to existing and newly place concrete surfaces properly curing the concrete for fast track project completion and quick installation of floor covering material.
Moisturebloc MX Emulsion System prevents and protects against floor adhesive failure on concrete surfaces containing elevated levels of moisture vapor. Applied prior to the installation of floor covering materials such as VCT, carpet, linoleum, vinyl and wood the system is guaranteed to reduce moisture vapor emissions (MVER) from as high as 27/# per ASTM F-1869 calcium chloride test results to below 3.0#/1000 sq. ft./24hrs. The product can be applied to concrete slabs with relative humidity (RH) up to 99% per ASTM F-2420.
The MoistureBloc MX Emulsion system can be applied to existing and newly place concrete surfaces properly curing the concrete for fast track project completion and quick installation of floor covering material.
STARSEAL PS ULTRA STAIN provides all the benefits of a StarSeal PS FSR floor with the addition of deep penetrating UV stable color that permanently locks into the surface.
STARSEAL PS ULTRA GUARD SPE provides excellent film forming stain protection, durable wear resistance and enhanced shine to densified/hardened and polished natural and colored concrete floors. The system provides the best and quickest stain protection while significantly increasing the gloss level and the co-efficient of friction of the treated floor. Easy and cost effective to install.
STARSEAL PS FINISH COAT ULTRA FSR provides the longest lasting non-film forming stain protection and enhanced shine to densified/hardened and polished natural and colored concrete floors. The system provides long term stain and wear resistance while significantly increasing the gloss level and the co-efficient of friction of the treated floor. Since there is no wax or coating to wear off, the StarSeal PS Finish Coat Ultra FSR system, when properly installed will not require reapplication saving down time, labor and material costs.
STARSEAL PS CLEAR enhances the natural beauty of gray and decorative concrete surfaces and produces a wear-pattern free, shine retentive permanently sealed, low-maintenance densified concrete floor. StarSeal PS Clear is a high solids potassium based silicate that rapidly penetrates without scrubbing and rinsing. Simply apply, re-distribute and re-apply until the concrete no longer absorbs the material. Once absorbed, StarSeal PS Clear reacts with the calcium hydroxide in the concrete producing a stronger more durable, dust free, superior looking and performing long lasting concrete floor.
STARSEAL PROTECT MFS is a magnesium fluorosilicate hardener and dust proofer formulated to chemically bond with concrete to produce a dense, abrasion resistant and breathable floor. StarSeal Protect MFS treated floors are functional, attractive and highly resistant to most acids and chemicals.
STARSEAL FUSION is an advanced concrete repair and restoration treatment for StarSeal PS or other silicate densifying floor treatments. StarSeal Fusion will repair small air holes, aggregate pop-outs, voids, micro cracks, small spider cracks and similar surface imperfections. While other types of repair materials become brittle and discolor the surface leaving it blotchy looking, StarSeal Fusion repairs and blends into the existing color of the concrete yielding a consistent natural looking floor.