Concrete Solutions for architects, engineers and builders since 1974

Certi-Vex CE 110

Structural low viscosity epoxy injection resin for bonding of cracks.

Certi-Vex CE 110 is a two component, 100% solids, solvent free, moisture tolerant, high modulus low viscosity structural construction multi purpose epoxy adhesive for gravity feed or pressure injection of cracks in concrete. Meets ASTM C881 types I, II, VI & VII, Grade 1, Classes B&C and AASHTO M-235.

 

BENEFITS

  • High Strength
  • Moisture tolerant
  • Excellent adhesion
  • Low viscosity for deep penetration
  • Protects against damage from salt and moisture

Certi-Vex CE 210

High Modules, medium viscosity multi-purpose adhesive for bonding fresh and hardened concrete to hardened concrete. Meets ASTM C881. The product can also be used as a structural gravity feed crack repair and patching for horizontal and vertical surfaces.

Certi-Vex CE 210 is a two component, 100% solids, solvent free, moisture tolerant, high modulus medium viscosity structural construction multi purpose epoxy adhesive. Meets ASTM C881 types I, II, IV & V, Grade 2, Classes B&C and AASHTO M-235.

BENEFITS

  • High strength
  • Moisture tolerant
  • Excellent adhesion
  • Meets requirements of USDA for food facilities
  • 99.9 % reduction of ASTM C881 water absorption
  • Medium viscosity, pourable and self leveling

Certi-Vex CE 310

High Modules epoxy non sage gel adhesive for anchoring bolts, dowels and reinforcing steel in concrete. Meets ASTM C881. The product can also be used as a structural patch for horizontal and vertical overhead surfaces.

Certi-Vex CE 310 is a two component, 100% solids, solvent free, moisture tolerant, high modulus structural construction multi purpose epoxy gel adhesive for anchoring, dowelling and bonding applications. Meets ASTM C881 types I, II, IV & V, Grade 3, Classes B&C and AASHTO M-235.

BENEFITS

  • 1:1 mix ratio by volume
  • High strength
  • Non Sag consistency
  • Excellent adhesion
  • Very low water absorption
  • Meets requirements for USDA food plants

Certi-Vex Envio Cure

Clear dissipating curing compounds with excellent moisture retention promoting longer life, better performing concrete. Available in three grades; general purpose commercial, state and federal specifications.

CERTI-VEX ENVIO CURE line of resin based clear curing compounds meet the most demanding specifications and current environmental standards for new concrete. During concretes early hardening stage, our curing compound’s protective film ensures low moisture transmission allowing for maximum development of the concretes strength and wear resistance, producing hard durable concrete.

BENEFITS

  • Low VOC <350 grams/liter
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-309 Type 1 or 1D, Class A&B
  • Meets FAA, CRD C-300 and is avaliable pre-approved by state DOT’s
  • Available with a factory supplied dye to aid in verification of application
  • Prevents efflorescence, dusting and spalling
  • Minimizes hair-line cracking
  • Three grades to choose from
  • Cleans up easily with water when wet
  • Meets ASTM D-869 for non settling

Certi-Vex Envio Cure White

White pigmented dissipating curing compounds with excellent moisture retention promoting longer life, better performing concrete. Available in three grades; general purpose commercial, state and federal specifications.

CERTI-VEX ENVIO CURE WHITE line of resin based white curing compounds meet the most demanding specifications and current environmental standards for new concrete. During concretes early hardening stage, our curing compound’s protective film ensures low moisture transmission allowing for maximum development of the concretes strength and wear resistance, producing hard durable concrete.

BENEFITS

  • Low VOC <350 grams/liter
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-309 Type 2 Class A&B
  • Meets FAA, CRD C-300 and is available pre-approved by state DOT’s
  • Prevents efflorescence, dusting and spalling
  • Minimizes hair-line cracking
  • White pigment reflects sunlight preventing excessive heat build up
  • Three grades to choose from
  • Cleans up easily with water when wet
  • Meets ASTM D-869 for non settling

Certi-Vex Envio Cure WL

Linseed oil emulsion with white pigments provides added protection against freeze/thaw cycles and penetration of corrosive salts minimizing maintenance and repair costs.

CERTI-VEX ENVIO CURE WL is an advanced curing and anti-spalling compound of white pigments and linseed oil that is easily spray applied. The product quickly dries to a white film that retains the gauging water allowing the concrete to achieve maximum hardness. This film also provides protection against freeze/thaw cycles and penetration by corrosive salts minimizing maintenance and repair cost.

BENEFITS

  • Low VOC <250 grams/liter
  • Life expectancy of concrete greatly extended
  • Protection against freeze/thaw cycles and corrosive salts
  • Minimizes maintenance and repair costs
  • Meets most standard state specifications and in most areas is available pre-approved
  • Low moisture transmission rates
  • Meets ASTM C-309 Type 2 Class A
  • Cleans up easily with water when wet

Certi-Vex Envio Cure White 1315

Premium white pigmented curing compound, based on Poly Alpha Methyl Styrene (PAMS) technology, Improves hydration and abrasion resistance to yield top performing concrete.

CERTI-VEX ENVIO CURE WHITE 1315 is a high solid premium white curing compound, based on Polyalpha Methyl Styrene solution polymer technology designed to meet the toughest performance and testing requirements. The product is non-settling, easy to use, quick drying and resists moisture loss to the lowest levels to ensure the concrete reaches maximum hardness, wear resistance and strength properties. The product is ideal for use where top performance is needed or to meet the strictest requirements of testing agencies.

BENEFITS

  • Improves abrasion resistance
  • Provides for complete development of concrete’s wear resistance and strength properties
  • VOC Compliant
  • Excellent moisture retention
  • Prevents efflorescence, dusting and spalling
  • Cleans up easily with water when wet
  • Improved durability for long life concrete

Certi-Vex Envio Cure Asphalt

Curing compound compatible with fresh concrete overlayed with asphalt.

CERTI-VEX ENVIO CURE ASPHALT is an emulsified hydrocarbon resin based curing compound ideal for use on fresh concrete that will be subsequently coated with bituminous mastic (asphalt) compounds, as well a sealer for new asphalt to seal off pores, hairline cracks, to provide water resistance, and to consolidate the new surface. Certi-Vex Envio Cure Asphalt dries quickly to form a tough, continuous, protective membrane. This film allows the concrete to develop maximum strength during its early hardening stage. On asphaltic pavements, it seals against the damaging effects of water and salt penetration.

BENEFITS

  • Low VOC <100 grams/liter
  • When used as a concrete cure, provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-309 Type 1 Class A
  • When used as a sealer on patches, prevents cracking and early evaporation from the patching material
  • Quick drying

Certi-Vex Envio Cure Clear 1315

Premium clear curing compound, based on Poly Alpha Methyl Styrene (PAMS) technology, improves hydration and abrasion resistance to yield top performing concrete.

CERTI-VEX ENVIOCURE CLEAR 1315 is a premium clear curing compound, based on Polyalpha Methyl Styrene technology designed to meet the toughest performance andtesting requirements. The product is non-settling, easy to use, quick drying and resists moisture loss to the lowest levels to ensure the concrete reaches maximum hardness, wear resistance and strength properties. The product is ideal for use where top performance is needed or to meet the strictest requirements of testing agencies.

BENEFITS

  • Low VOC <350 grams/liter
  • Meets ASTM C-309 Type 1 Class A&B
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Prevents efflorescence, dusting and spalling
  • Low moisture transmission rates
  • Meets ASTM C-1315 Type 1 Class B
  • Water borne for environmental concerns
  • Cleans up easily with water when wet

StarSeal Envio Set

Top surface retarder for exposing aggregate in horizontal and vertical concrete.

STARSEAL ENVIO SET is a concrete top surface retarding agent and conditioner. Apply to fresh concrete to inhibit the setting of the top surface layer while the remainder of the concrete cures normally. After the concrete sets or forms are removed, simply and easily remove StarSeal Envio Set and unhardened mortar to reveal a beautifully textured exposed aggregate surface.

BENEFITS

  • Allows removal of the top layer of freshly placed concrete to reveal the natural colors of the various aggregates
  • Water borne for environmentally sensitive areas
  • Pink color for ease of application
  • Easily exposes aggregate
  • Low odor

StarSeal Assist RTU

Ready to use product that reduces the rate of mositure evaporation in fresh concrete.Extends working time and assist in concrete slab finishing in rapid drying conditions.

STARSEAL ASSIST RTU is a ready to use evaporation retardant that is applied to fresh concrete during finishing to extend working time.

When properly applied, StarSeal Assist RTU forms a thin, continuous monomolecular film that reduces early moisture evaporation between the various placing and finishing operations, a major cause of plastic shrinkage cracking.

BENEFITS

  • Formulated for instant usage
  • No dilution required
  • Helps prevent plastic shrinkage cracking
  • Holds in surface moisture reducing evaporation rate
  • Extends finishing time
  • Minimizes rapid drying due to high wind, direct sunlight and high temperatures
  • Dyed yellow as visual application aid

StarSeal Assist

Concentrate that reduces the rate of mositure evaporation in fresh concrete.Extends working time and assist in concrete slab finishing in rapid drying conditions.

STARSEAL ASSIST is an evaporation retarder that is applied to fresh concrete during finishing to extend working time.

When properly applied, StarSeal Assist forms a thin, continuous monomolecular film that reduces early moisture evaporation between the various placing and finishing operations, a major cause of plastic shrinkage cracking.

BENEFITS

  • Helps prevent plastic shrinkage cracking
  • Holds in surface moisture reducing evaporation rate
  • Extends finishing time
  • Minimizes rapid drying due to high wind, direct sunlight and high temperatures
  • Economical concentrate
  • Easy to use, just mix with water
  • DOT approved
  • Dyed yellow as visual application aid

Promotions/Specials

Please check back for future specials.