Concrete Solutions for architects, engineers and builders since 1974

LEED Products

EQ Credit 4.1: Low Emitting Materials, Adhesives and Sealants

Intent: Reduce the quality of indoor air contaminants that are odorous, irritating and/or harmful to the comfort and well being of installers and building occupants.

Requirement: All adhesives and sealants used on the interior of the building shall comply with the requirements of the referenced standard.

View Products

  • StarSeal EF Weather Seal

    Better long term protection against salt corrosion, deicing chemicals, mildew, water, wind driven rain, airborne contaminants surface spalling from freeze/thaw cycles and other harsh weather conditions.

  • Certi-Shine MicroStain System

    This system includes all the features and benefits of Certi-Shine Clear FSR with the addition of permanent color.

  • Certi-Shine Clear FSR System

    This system includes the features and benefits of Certi-Shine Clear with added resistance to food stains such as vinegar, milk and citric acids.

  • Certi-Shine Clear

    Permanent shine for polished concrete - permanently protected and sealed. Simply apply, no rinsing or scrubbing required, until the concrete is fully densified. Guaranteed durability, backed by 20 year performance warranty.

  • StarSeal EF Weather Seal Plus

    Best long term protection against salt corrosion, deicing chemicals, mildew, water, wind driven rain, airborne contaminants, surface spalling from freeze/thaw cycles and other severe weather conditions.

  • StarSeal EF Weather Repel

    Good protection against surface cracking and spalling from the effects of repeated wet/dry and freeze/thaw cycles caused by water and salt penetration.

  • StarSeal EF Weather & Stain Guard

    Breathable acrylic economical coating that provides good protection from the elements while enhancing and revitalizing.

  • MoistureBloc Vapor Reduction System (VRS) Emulsion

    Cost effective easy two step application reduces moisture vapor readings ranging from 10-15 to under 3lbs. Can be used with reactive and non reactive adhesives.

  • MoistureBloc MX Emulsion System

    Maximum protection against flooring adhesive failure caused from moisture vapor in concrete. Guaranteed to reduce 27/# calcium chloride test to below 3.0#/ 1000 sq. ft./24hrs.(RH 99%).

  • StarSeal PS Clear

    High solids densifier that provides a sealed and hardened surface that is low maintenance, wear and abrasion resistant. Easy and quick to apply, the product produces glossy floors without the use of a topical coating.

  • Certi-Vex Penseal 244 40% AIM

    Low VOC premium high solids penetrating sealer. Protects against salt corrosion, water, wind driven rain, airborne contaminants and freeze/thaw cycles.

  • PowerSeal 40

    Premium high solids penetrating sealer. Protects against salt corrosion, water, wind driven rain, airborne contaminants and freeze thaw cycles.

  • PowerSeal 20

    Value priced penetrating sealer. Protects against water and chloride intrusion.


EQ Credit 4.2: Low Emitting Materials, Paint and Coatings

Intent: Reduce the quality of indoor air contaminants that are odorous, irritating and/or harmful to the comfort and well being of installers and building occupants.

Requirement: All adhesives and sealants used on the interior of the building shall comply with the requirements of the referenced standard.

View Products

  • StarSeal Lithium S+

    A lithium silicate hardener/denisifier that rapidly penetrates without scrubbing and rinsing producing a fully densified floor that is wear-pattern free, shine retentive permanently sealed, low-maintenance, stain-free concrete floor.

  • Certi-Vex Penseal 244 100% Plus

    Ideal for parking decks and parking areas, high traffic areas. Keep surfaces clean by providing greater protection over standard water repellents by sealing out water, oil. grease and food staining from concrete and masonry surfaces.

  • Certi-Vex Penseal 244 FD

    Fast drying for tight construction schedules, bridges and parking decks. Ideal for low temperature applications.

  • PowerCoat Primer WB

    Single component ready to use primers. Apply as a primer to existing concrete or as a cure and primer to new concrete saving time for fast track new construction.

  • StarSeal EF UV Super Gloss

    High solids exterior non-yellowing curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an attractive long lasting, durable high gloss shine.

  • StarSeal EF UV High Gloss

    Premium exterior non-yellowing curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an attractive long lasting high gloss shine.

  • StarSeal EF UV Gloss

    Exterior non-yellowing curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an attractive gloss shine.

  • StarSeal EF UV Flat

    Ready to use curing and sealing compound for new and existing concrete surfaces. Leaves a clear hard protective matte finish coating and is an excellent cure material for long term concrete performance.

  • StarSeal EF Super Coat HBV

    Provides an attractive, breathable, protective high solids acrylic coating that enhances the aesthetic appearance of vertical concrete and masonry surfaces. Provides excellent adhesion, weathering and waterproofing protection.

  • StarSeal EF Stain

    Ready to use colored curing and sealing compound for new and existing concrete surfaces. StarSeal EF Stain leaves a uniform color and long lasting protective coating and is an excellent cure material for long term concrete performance.

  • StarSeal EF Primer

    Use with StarSeal EF Epoxy as a prime coat applied to both new and existing concrete. Ideal for fast track projects that require a product solution that will cure and prime the surface in one easy application.

  • StarSeal EF Medium Gloss

    Value priced curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an semi-gloss shine.

  • StarSeal Vertical Stain

    Breathable acrylic economical coating that provides good protection from the elements while enhancing and revitalizing.

  • StarSeal Block Fill Emulsion

    Use on masonry, block and concrete to fill pores and capillaries providing a uniform sealed and primed surface for topcoating.

  • StarSeal EF High Gloss

    Premium curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an attractive long lasting high gloss shine.

  • StarSeal EF Low Gloss

    Economical curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an low gloss shine.

  • StarSeal EF Epoxy

    Breathable epoxy coating that provides excellent resistance to damage from wear, abrasion, impact and chemical attack.

  • Certi-Vex Max Release

    Economical alternative to water base form release agents. Excellent release properties yielding a smooth uniform concrete finish. The product contains technologically advanced additives which provide exceptional bonding characteristics to many form types including galvanized steel.

  • PowerCoat Epoxy LD WB

    Breathable light duty epoxy for concrete floors in areas of light to medium pedestrian and vehicle traffic and where occasional spillage of chemicals may occur.

  • PowerCoat Epoxy HD WB

    Breathable heavy duty epoxy coating that provides durability, abrasion and excellent chemical resistance for the most demanding environments.

  • StarSeal EF Cure White

    Low Voc <100 g/l white curing compound.

  • StarSeal 800

    Medium gloss value priced, low odor 20% solids breathable sealer ideal for interior concrete.

  • StarSeal 309

    Low gloss economical, low odor 15% solids breathable sealer ideal for interior concrete.

  • StarSeal 30%

    High Gloss long lasting, low odor 30% solids breathable sealer ideal for interior concrete.

  • StarSeal 1500

    Breathable high solids clear sealer that enhances and protects exterior concrete with a long lasting non yellowing high gloss finish.

  • StarSeal 1315 Concrete Stain

    Enhances and revitalizes new and existing concrete with a hardened, wear resistant surface. Deep penetrating for uniform and long lasting color.

  • StarSeal 1315 Beading Flat

    Breathable clear coating that seals and protects horizontal and vertical surfaces with a flat finish.

  • StarSeal 1315

    Clear breathable sealer that enhances and protects exterior concrete with a non yellowing, durable gloss finish.

  • StarSeal Color Stain

    A tintable semi-transparent penetrating curing and sealing compound that provides a translucent appearance on gray and colored concrete surfaces.

  • StarSeal Color Seal

    A tintable penetrating curing and sealing compound that provides a opaque appearance on gray and colored concrete surfaces.

  • Certi-Vex Clean Lift

    Fast drying membrane forming, reactive bond breaker for tilt-up construction meeting ASTM C-309 & ACI 308 industry standards.


EQ Credit 7.1: Thermal Comfort Design

Intent: Provide a comfortable thermal environment that supports the productivity and well being of building occupants.

Requirement: Design HVAC systems and the buildings envelop to meet the requirements of the referenced standard.

The ANSI/ASHRAE Standard 55-2004, Thermal Environmental Conditions for Human Occupancy, addresses several facets of temperatures inside buildings. This standard addresses temperature, thermal radiation, humidity and air speed, along with personal factors such as activity and clothing. Specifications include combinations of indoor thermal environmental factors and personal factors that will produce thermal environmental conditions acceptable to a majority of the occupants within the space.

View Products

  • Certi-Shine MicroStain System

    This system includes all the features and benefits of Certi-Shine Clear FSR with the addition of permanent color.

  • Certi-Shine Clear FSR System

    This system includes the features and benefits of Certi-Shine Clear with added resistance to food stains such as vinegar, milk and citric acids.

  • Certi-Shine Clear

    Permanent shine for polished concrete - permanently protected and sealed. Simply apply, no rinsing or scrubbing required, until the concrete is fully densified. Guaranteed durability, backed by 20 year performance warranty.

  • MoistureBloc Vapor Reduction System (VRS) Emulsion

    Cost effective easy two step application reduces moisture vapor readings ranging from 10-15 to under 3lbs. Can be used with reactive and non reactive adhesives.

  • StarSeal PS Clear

    High solids densifier that provides a sealed and hardened surface that is low maintenance, wear and abrasion resistant. Easy and quick to apply, the product produces glossy floors without the use of a topical coating.


EQ Credit 7.2: Thermal Comfort

Intent: Prove an assessment of a buildings thermal comfort within a period of six to 18 months after occupancy.

Requirement: Implement a thermal comfort survey of building occupants. The survey should collect anonymous responses about thermal comfort in the building including an assessment of overall satisfaction with thermal performance and identification of thermal comfort related problems. Building owners must agree to develop a corrective plan of action if survey results indicate that more then 20% if occupants are dissatisfied with the thermal comfort of the building. This plan should include measurement of relevant environmental variables in problem areas in accordance with the referenced standard.

View Products

  • Certi-Shine MicroStain System

    This system includes all the features and benefits of Certi-Shine Clear FSR with the addition of permanent color.

  • Certi-Shine Clear FSR System

    This system includes the features and benefits of Certi-Shine Clear with added resistance to food stains such as vinegar, milk and citric acids.

  • Certi-Shine Clear

    Permanent shine for polished concrete - permanently protected and sealed. Simply apply, no rinsing or scrubbing required, until the concrete is fully densified. Guaranteed durability, backed by 20 year performance warranty.

  • MoistureBloc Vapor Reduction System (VRS) Emulsion

    Cost effective easy two step application reduces moisture vapor readings ranging from 10-15 to under 3lbs. Can be used with reactive and non reactive adhesives.

  • StarSeal PS Clear

    High solids densifier that provides a sealed and hardened surface that is low maintenance, wear and abrasion resistant. Easy and quick to apply, the product produces glossy floors without the use of a topical coating.


EA Credit 1: Optimize Energy Performance

Intent: Achieve increasing levels of energy performance above the baseline in the prerequisite standard to reduce environmental and economic impacts associated with excess energy use.

Requirement: Option 1–Whole Building Energy Simulation-Demonstrate a percentage improvement in the buildings performance rating compared to the baseline building performance rating standard. The minimum energy cost savings is 14% for which 2 LEED points are earned.

Efficient use of energy is a requirement for new construction, under LEED Energy Optimization Credit EA 1, and Certi-Shine polished concrete can contribute to this end by reducing the amount of energy needed to light, heat and cool buildings.

View Products

  • Certi-Shine MicroStain System

    This system includes all the features and benefits of Certi-Shine Clear FSR with the addition of permanent color.

  • Certi-Shine Clear FSR System

    This system includes the features and benefits of Certi-Shine Clear with added resistance to food stains such as vinegar, milk and citric acids.

  • Certi-Shine Clear

    Permanent shine for polished concrete - permanently protected and sealed. Simply apply, no rinsing or scrubbing required, until the concrete is fully densified. Guaranteed durability, backed by 20 year performance warranty.

  • StarSeal PS Clear

    High solids densifier that provides a sealed and hardened surface that is low maintenance, wear and abrasion resistant. Easy and quick to apply, the product produces glossy floors without the use of a topical coating.


MR Credit 1.1/1.2: Building Reuse

Intent: Extend the life cycle of existing building stock, conserve resources, retain cultural resources, reduce waste and reduces environmental impacts of new buildings as they relate to materials manufacturing and transport.

Requirement: Maintain at least 75% & 95%, based on surface area, of existing building structure, and envelope, including structural floor and roof decking. By considering the reuse of an existing building verses building new structures, project teams can earn LEED points when the surface area to be retained is at least 75% concrete or more during a major renovation.

View Products

  • Certi-Shine MicroStain System

    This system includes all the features and benefits of Certi-Shine Clear FSR with the addition of permanent color.

  • Certi-Shine Clear FSR System

    This system includes the features and benefits of Certi-Shine Clear with added resistance to food stains such as vinegar, milk and citric acids.

  • Certi-Shine Clear

    Permanent shine for polished concrete - permanently protected and sealed. Simply apply, no rinsing or scrubbing required, until the concrete is fully densified. Guaranteed durability, backed by 20 year performance warranty.

  • StarSeal PS Clear

    High solids densifier that provides a sealed and hardened surface that is low maintenance, wear and abrasion resistant. Easy and quick to apply, the product produces glossy floors without the use of a topical coating.


MR Credit 1.3: Building Reuse

Intent: Extend the life cycle of existing building stock, conserve resources, retain cultural resources, reduce waste and reduces environmental impacts of new buildings as they relate to materials manufacturing and transport.

Requirement: Use existing interior nonuctural elements, such as flooring in at least 50% of the completed building.

View Products

  • Certi-Shine MicroStain System

    This system includes all the features and benefits of Certi-Shine Clear FSR with the addition of permanent color.

  • Certi-Shine Clear FSR System

    This system includes the features and benefits of Certi-Shine Clear with added resistance to food stains such as vinegar, milk and citric acids.

  • Certi-Shine Clear

    Permanent shine for polished concrete - permanently protected and sealed. Simply apply, no rinsing or scrubbing required, until the concrete is fully densified. Guaranteed durability, backed by 20 year performance warranty.

  • StarSeal PS Clear

    High solids densifier that provides a sealed and hardened surface that is low maintenance, wear and abrasion resistant. Easy and quick to apply, the product produces glossy floors without the use of a topical coating.


MR Credit 2.1/2.2: Construction Waste Management

Intent: Divert construction and demolition debris from disposal in landfills and incinerators. Redirect recyclable recovered resources back to the manufacturing process. Redirect reusable materials to appropriate sites.

Requirement: Recycle and/or salvage at least 50%/75% of non hazardous construction and demolition debris. Develop and implement a construction waste management plan that, at a minimum, identifies the materials to be diverted from disposal and whether the materials will be sorted on-site or co-mingled. Calculations can be done by weight or volume, but must be consistent throughout.

View Products

  • StarSeal Lithium S+

    A lithium silicate hardener/denisifier that rapidly penetrates without scrubbing and rinsing producing a fully densified floor that is wear-pattern free, shine retentive permanently sealed, low-maintenance, stain-free concrete floor.

  • StarSeal EF Weather Seal

    Better long term protection against salt corrosion, deicing chemicals, mildew, water, wind driven rain, airborne contaminants surface spalling from freeze/thaw cycles and other harsh weather conditions.

  • Certi-Shine MicroStain System

    This system includes all the features and benefits of Certi-Shine Clear FSR with the addition of permanent color.

  • Certi-Shine Clear FSR System

    This system includes the features and benefits of Certi-Shine Clear with added resistance to food stains such as vinegar, milk and citric acids.

  • Certi-Shine Clear

    Permanent shine for polished concrete - permanently protected and sealed. Simply apply, no rinsing or scrubbing required, until the concrete is fully densified. Guaranteed durability, backed by 20 year performance warranty.

  • StarSeal EF Weather Seal Plus

    Best long term protection against salt corrosion, deicing chemicals, mildew, water, wind driven rain, airborne contaminants, surface spalling from freeze/thaw cycles and other severe weather conditions.

  • StarSeal EF Weather & Stain Guard

    Breathable acrylic economical coating that provides good protection from the elements while enhancing and revitalizing.

  • StarSeal EF UV Super Gloss

    High solids exterior non-yellowing curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an attractive long lasting, durable high gloss shine.

  • StarSeal EF UV High Gloss

    Premium exterior non-yellowing curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an attractive long lasting high gloss shine.

  • StarSeal EF UV Gloss

    Exterior non-yellowing curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an attractive gloss shine.

  • StarSeal EF UV Flat

    Ready to use curing and sealing compound for new and existing concrete surfaces. Leaves a clear hard protective matte finish coating and is an excellent cure material for long term concrete performance.

  • StarSeal EF Super Coat HBV

    Provides an attractive, breathable, protective high solids acrylic coating that enhances the aesthetic appearance of vertical concrete and masonry surfaces. Provides excellent adhesion, weathering and waterproofing protection.

  • StarSeal EF Stain

    Ready to use colored curing and sealing compound for new and existing concrete surfaces. StarSeal EF Stain leaves a uniform color and long lasting protective coating and is an excellent cure material for long term concrete performance.

  • StarSeal EF Primer

    Use with StarSeal EF Epoxy as a prime coat applied to both new and existing concrete. Ideal for fast track projects that require a product solution that will cure and prime the surface in one easy application.

  • StarSeal EF Medium Gloss

    Value priced curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an semi-gloss shine.

  • StarSeal Vertical Stain

    Breathable acrylic economical coating that provides good protection from the elements while enhancing and revitalizing.

  • StarSeal Block Fill Emulsion

    Use on masonry, block and concrete to fill pores and capillaries providing a uniform sealed and primed surface for topcoating.

  • StarSeal EF High Gloss

    Premium curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an attractive long lasting high gloss shine.

  • StarSeal EF Low Gloss

    Economical curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an low gloss shine.

  • MoistureBloc Vapor Reduction System (VRS) Emulsion

    Cost effective easy two step application reduces moisture vapor readings ranging from 10-15 to under 3lbs. Can be used with reactive and non reactive adhesives.

  • MoistureBloc MX Emulsion System

    Maximum protection against flooring adhesive failure caused from moisture vapor in concrete. Guaranteed to reduce 27/# calcium chloride test to below 3.0#/ 1000 sq. ft./24hrs.(RH 99%).

  • Certi-Vex Max Release

    Economical alternative to water base form release agents. Excellent release properties yielding a smooth uniform concrete finish. The product contains technologically advanced additives which provide exceptional bonding characteristics to many form types including galvanized steel.

  • StarSeal PS Clear

    High solids densifier that provides a sealed and hardened surface that is low maintenance, wear and abrasion resistant. Easy and quick to apply, the product produces glossy floors without the use of a topical coating.

  • StarSeal EF Cure White

    Low Voc <100 g/l white curing compound.

  • StarSeal 800

    Medium gloss value priced, low odor 20% solids breathable sealer ideal for interior concrete.

  • StarSeal 309

    Low gloss economical, low odor 15% solids breathable sealer ideal for interior concrete.

  • Certi-Vex Penseal 244 40% AIM

    Low VOC premium high solids penetrating sealer. Protects against salt corrosion, water, wind driven rain, airborne contaminants and freeze/thaw cycles.

  • StarSeal 30%

    High Gloss long lasting, low odor 30% solids breathable sealer ideal for interior concrete.

  • StarSeal 1500

    Breathable high solids clear sealer that enhances and protects exterior concrete with a long lasting non yellowing high gloss finish.

  • StarSeal 1315 Concrete Stain

    Enhances and revitalizes new and existing concrete with a hardened, wear resistant surface. Deep penetrating for uniform and long lasting color.

  • StarSeal 1315 Beading Flat

    Breathable clear coating that seals and protects horizontal and vertical surfaces with a flat finish.

  • StarSeal 1315

    Clear breathable sealer that enhances and protects exterior concrete with a non yellowing, durable gloss finish.

  • StarSeal Color Stain

    A tintable semi-transparent penetrating curing and sealing compound that provides a translucent appearance on gray and colored concrete surfaces.

  • StarSeal Color Seal

    A tintable penetrating curing and sealing compound that provides a opaque appearance on gray and colored concrete surfaces.

  • PowerSeal 40

    Premium high solids penetrating sealer. Protects against salt corrosion, water, wind driven rain, airborne contaminants and freeze thaw cycles.

  • PowerSeal 20

    Value priced penetrating sealer. Protects against water and chloride intrusion.


MR Credit 3.1/3.2: Materials Reuse

Intent: Reuse materials and products in order to reduce demand for virgin materials and to reduce waste, thereby reducing impacts associated with the extraction and processing of virgin resources.

Requirement: Use salvaged, refurbished or reused materials such that the sum of these materials constitutes at least 5% and 10% respectively, based on cost, of the total value of materials on the project. (You can only include permanently installed materials).

A project team needs to calculate the total cost of all materials used on the project and determine the material “replacement value” of comparable concrete material. The total cost of these materials and other salvaged, refurbished or reused materials must be a minimum of 5% to earn one point and 10% to earn an additional point. (Note: Project teams that do not qualify for this credit may qualify for points under MR credit 2.1 or 2.2)

View Products

  • Certi-Shine MicroStain System

    This system includes all the features and benefits of Certi-Shine Clear FSR with the addition of permanent color.

  • Certi-Shine Clear FSR System

    This system includes the features and benefits of Certi-Shine Clear with added resistance to food stains such as vinegar, milk and citric acids.

  • Certi-Shine Clear

    Permanent shine for polished concrete - permanently protected and sealed. Simply apply, no rinsing or scrubbing required, until the concrete is fully densified. Guaranteed durability, backed by 20 year performance warranty.

  • StarSeal PS Clear

    High solids densifier that provides a sealed and hardened surface that is low maintenance, wear and abrasion resistant. Easy and quick to apply, the product produces glossy floors without the use of a topical coating.


MR Credit 4.1/4.2: Recycled Content

Intent: Increase demand for building products that incorporate recycled content materials, thereby reducing impacts resulting from extraction and processing of virgin materials.

Requirement: Use materials with recycled content such that the sum of post-consumer recycled content plus one-half of the pre-consumer content constitutes at least 10% (based on cost) of the total value of the materials in the project.

The recycled content value of a material assembly shall be determined by weight. The recycled fraction of the assembly is then multiplied by the cost of assembly to determine the recycled content value.

Mechanical, electrical and plumbing components and specialty items such as elevators shall not be included in this calculation. Only include materials permanently installed in the project. Furniture may be included, providing it is included consistently in MR Credits 3-7.

Recycled content shall be defined in accordance with the International Organization for Standardization document, ISO 14021 –environmental labels and declarations – Self-declared environmental claims (Type II environmental labeling).

Post-Consumer Material is defined as waste material generated by households or by commercial, industrial and institutional facilities in their role as end-users of the product, which can no longer be used for its intended purpose.

Pre-consumer Material is defined as material diverted from the waste stream during the manufacture process. Excluded is reutilization of materials such as rework, regrind or scrap generated in a process and capable of being reclaimed within the same process that generated it.

View Products

  • Certi-Shine MicroStain System

    This system includes all the features and benefits of Certi-Shine Clear FSR with the addition of permanent color.

  • Certi-Shine Clear FSR System

    This system includes the features and benefits of Certi-Shine Clear with added resistance to food stains such as vinegar, milk and citric acids.

  • Certi-Shine Clear

    Permanent shine for polished concrete - permanently protected and sealed. Simply apply, no rinsing or scrubbing required, until the concrete is fully densified. Guaranteed durability, backed by 20 year performance warranty.

  • StarSeal PS Clear

    High solids densifier that provides a sealed and hardened surface that is low maintenance, wear and abrasion resistant. Easy and quick to apply, the product produces glossy floors without the use of a topical coating.


MR Credit 5.1/5.2: Regional Materials

Intent: Increase demand for building materials and products that are extracted and manufactured within the region, thereby supporting the use of indigenous resources and reducing the environment impacts resulting from transportation.

Requirement: Use building materials or products that have been extracted, harvested or recovered, as well as manufactured, within 500 miles of the project site for a minimum of 10% (based on cost) of the total material value. If only a fraction of a product or material is extracted/harvested/recovered and manufactured locally, then only that percentage (by weight) shall contribute to the regional value.

Mechanical, electrical and plumbing components and specialty items such as elevators and equipment shall not be included in this calculation. Only include materials permanently installed in the project. Furniture may be included, providing it is included consistently in MR Credits 3-7.

View Products

  • StarSeal Lithium S+

    A lithium silicate hardener/denisifier that rapidly penetrates without scrubbing and rinsing producing a fully densified floor that is wear-pattern free, shine retentive permanently sealed, low-maintenance, stain-free concrete floor.

  • Certi-Vex Penseal 244 100% Plus

    Ideal for parking decks and parking areas, high traffic areas. Keep surfaces clean by providing greater protection over standard water repellents by sealing out water, oil. grease and food staining from concrete and masonry surfaces.

  • Certi-Vex Penseal 244 FD

    Fast drying for tight construction schedules, bridges and parking decks. Ideal for low temperature applications.

  • StarSeal EF Weather Seal

    Better long term protection against salt corrosion, deicing chemicals, mildew, water, wind driven rain, airborne contaminants surface spalling from freeze/thaw cycles and other harsh weather conditions.

  • PowerCoat Primer WB

    Single component ready to use primers. Apply as a primer to existing concrete or as a cure and primer to new concrete saving time for fast track new construction.

  • Certi-Shine MicroStain System

    This system includes all the features and benefits of Certi-Shine Clear FSR with the addition of permanent color.

  • Certi-Shine Clear FSR System

    This system includes the features and benefits of Certi-Shine Clear with added resistance to food stains such as vinegar, milk and citric acids.

  • Certi-Shine Clear

    Permanent shine for polished concrete - permanently protected and sealed. Simply apply, no rinsing or scrubbing required, until the concrete is fully densified. Guaranteed durability, backed by 20 year performance warranty.

  • StarSeal EF Weather Seal Plus

    Best long term protection against salt corrosion, deicing chemicals, mildew, water, wind driven rain, airborne contaminants, surface spalling from freeze/thaw cycles and other severe weather conditions.

  • StarSeal EF Weather & Stain Guard

    Breathable acrylic economical coating that provides good protection from the elements while enhancing and revitalizing.

  • StarSeal EF UV Super Gloss

    High solids exterior non-yellowing curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an attractive long lasting, durable high gloss shine.

  • StarSeal EF UV High Gloss

    Premium exterior non-yellowing curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an attractive long lasting high gloss shine.

  • StarSeal EF UV Gloss

    Exterior non-yellowing curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an attractive gloss shine.

  • StarSeal EF UV Flat

    Ready to use curing and sealing compound for new and existing concrete surfaces. Leaves a clear hard protective matte finish coating and is an excellent cure material for long term concrete performance.

  • StarSeal EF Super Coat HBV

    Provides an attractive, breathable, protective high solids acrylic coating that enhances the aesthetic appearance of vertical concrete and masonry surfaces. Provides excellent adhesion, weathering and waterproofing protection.

  • StarSeal EF Stain

    Ready to use colored curing and sealing compound for new and existing concrete surfaces. StarSeal EF Stain leaves a uniform color and long lasting protective coating and is an excellent cure material for long term concrete performance.

  • StarSeal EF Primer

    Use with StarSeal EF Epoxy as a prime coat applied to both new and existing concrete. Ideal for fast track projects that require a product solution that will cure and prime the surface in one easy application.

  • StarSeal EF Medium Gloss

    Value priced curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an semi-gloss shine.

  • StarSeal Vertical Stain

    Breathable acrylic economical coating that provides good protection from the elements while enhancing and revitalizing.

  • StarSeal Block Fill Emulsion

    Use on masonry, block and concrete to fill pores and capillaries providing a uniform sealed and primed surface for topcoating.

  • StarSeal EF High Gloss

    Premium curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an attractive long lasting high gloss shine.

  • StarSeal EF Low Gloss

    Economical curing and sealing clear compound for new and existing concrete. Protects and enhances colored and natural concrete surfaces with an low gloss shine.

  • StarSeal EF Epoxy

    Breathable epoxy coating that provides excellent resistance to damage from wear, abrasion, impact and chemical attack.

  • MoistureBloc Vapor Reduction System (VRS) Emulsion

    Cost effective easy two step application reduces moisture vapor readings ranging from 10-15 to under 3lbs. Can be used with reactive and non reactive adhesives.

  • MoistureBloc MX Emulsion System

    Maximum protection against flooring adhesive failure caused from moisture vapor in concrete. Guaranteed to reduce 27/# calcium chloride test to below 3.0#/ 1000 sq. ft./24hrs.(RH 99%).

  • Certi-Vex Max Release

    Economical alternative to water base form release agents. Excellent release properties yielding a smooth uniform concrete finish. The product contains technologically advanced additives which provide exceptional bonding characteristics to many form types including galvanized steel.

  • StarSeal PS Clear

    High solids densifier that provides a sealed and hardened surface that is low maintenance, wear and abrasion resistant. Easy and quick to apply, the product produces glossy floors without the use of a topical coating.

  • PowerCoat Epoxy LD WB

    Breathable light duty epoxy for concrete floors in areas of light to medium pedestrian and vehicle traffic and where occasional spillage of chemicals may occur.

  • PowerCoat Epoxy HD WB

    Breathable heavy duty epoxy coating that provides durability, abrasion and excellent chemical resistance for the most demanding environments.

  • StarSeal EF Cure White

    Low Voc <100 g/l white curing compound.

  • StarSeal 800

    Medium gloss value priced, low odor 20% solids breathable sealer ideal for interior concrete.

  • StarSeal 309

    Low gloss economical, low odor 15% solids breathable sealer ideal for interior concrete.

  • Certi-Vex Penseal 244 40% AIM

    Low VOC premium high solids penetrating sealer. Protects against salt corrosion, water, wind driven rain, airborne contaminants and freeze/thaw cycles.

  • StarSeal 30%

    High Gloss long lasting, low odor 30% solids breathable sealer ideal for interior concrete.

  • StarSeal 1500

    Breathable high solids clear sealer that enhances and protects exterior concrete with a long lasting non yellowing high gloss finish.

  • StarSeal 1315 Concrete Stain

    Enhances and revitalizes new and existing concrete with a hardened, wear resistant surface. Deep penetrating for uniform and long lasting color.

  • StarSeal 1315 Beading Flat

    Breathable clear coating that seals and protects horizontal and vertical surfaces with a flat finish.

  • StarSeal 1315

    Clear breathable sealer that enhances and protects exterior concrete with a non yellowing, durable gloss finish.

  • StarSeal Color Stain

    A tintable semi-transparent penetrating curing and sealing compound that provides a translucent appearance on gray and colored concrete surfaces.

  • StarSeal Color Seal

    A tintable penetrating curing and sealing compound that provides a opaque appearance on gray and colored concrete surfaces.

  • Certi-Vex Clean Lift

    Fast drying membrane forming, reactive bond breaker for tilt-up construction meeting ASTM C-309 & ACI 308 industry standards.

  • PowerSeal 40

    Premium high solids penetrating sealer. Protects against salt corrosion, water, wind driven rain, airborne contaminants and freeze thaw cycles.

  • PowerSeal 20

    Value priced penetrating sealer. Protects against water and chloride intrusion.


ID Credit 1: Innovations in Design

Intent: To provide teams and projects the opportunity to be awarded points for exceptional performance above the requirements set by the LEED for New Construction Green Building Rating System and/or innovative performance in Green building categories not specifically addressed by this Rating System.

Requirement: In writing, identifying the intent of the proposed innovation credit, the proposed requirement for compliance, the proposed submittals to demonstrate compliance, and the design approach (strategies) that might be used to meet the requirements.

View Products

  • Certi-Shine MicroStain System

    This system includes all the features and benefits of Certi-Shine Clear FSR with the addition of permanent color.

  • Certi-Shine Clear FSR System

    This system includes the features and benefits of Certi-Shine Clear with added resistance to food stains such as vinegar, milk and citric acids.

  • Certi-Shine Clear

    Permanent shine for polished concrete - permanently protected and sealed. Simply apply, no rinsing or scrubbing required, until the concrete is fully densified. Guaranteed durability, backed by 20 year performance warranty.

  • StarSeal PS Clear

    High solids densifier that provides a sealed and hardened surface that is low maintenance, wear and abrasion resistant. Easy and quick to apply, the product produces glossy floors without the use of a topical coating.

Promotions/Specials

Please check back for future specials.