Concrete Solutions for architects, engineers and builders since 1974

Cure & Seal Coatings

Vexcon offers the widest selection of premium crystal-clear and colored concrete cure and seals. Whether using on new or existing concrete, our water base StarSeal® and solvent base Certi-Vex® brands are easy-to-use, non-yellowing and penetrate quickly to form a hard coating that is wear, chemical and stain resistant.

Certi-Vex AC 1315 Beading Flat

Breathable clear coating that seals and protects horizontal and vertical surfaces with a flat finish.

CERTI-VEX AC 1315 BEADING FLAT is a solvent base cure and seal coating that enhances new a existing concrete surfaces with a low sheen/matte appearance. The product is non yellowing and protects against water and salt penetration as well as staining. Certi-Vex AC1315 Beading Flat features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

Ideal for applications where a non-yellowing semi-gloss matte appearance is desired on horizontal or vertical concrete masonry, stamped and decorative concrete surfaces.

BENEFITS

  • Matte appearance
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Non-Yellowing
  • Meets ASTM C-1315 Type 1 Class A
  • Seals and hardens surface reducing clean up and maintenance
  • Excellent stain protection against attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Apply to damp surfaces without whitening or loss of adhesion
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 1315 Concrete Stain

Enhances and revitalizes new and existing concrete with a hardened, wear resistant surface. Deep penetrating for uniform and long lasting color.

CERTI-VEX AC 1315 CONCRETE STAIN is a solvent base ready to use colored curing and sealing coating. The product quickly hardens to a wear resistant protective coating that enhances and revitalizes the appearance of new or existing concrete with an attractive, durable uniform color appearance. Certi-Vex AC 1315 Concrete Stain features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

The product is ideal for exterior applications, stamped and decorated concrete, concrete pavers, stucco or brick walls, architectural sections and colored concrete to even out color variations.

BENEFITS

  • Available in 15 standard and custom colors
  • Economical decorative coating
  • Revitalizes old, stained or uncolored concrete
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-1315 Type 2 Class B
  • Seals and hardens surface reducing clean-up and maintenance
  • Excellent protection against staining, attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Corrects variations in colored concrete
  • Apply to damp surfaces without whitening or loss of adhesion
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 1315 Super Seal

Low VOC breathable fast drying clear sealer that enhances and protects exterior concrete with a non yellowing, durable gloss finish.

CERTI-VEX AC 1315 SUPER SEAL is a low VOC solvent base cure and seal coating for new and existing concrete surfaces. Certi-Vex AC 1315 Super Seal leaves a clear protective coating and is an excellent cure material for long term concrete performance. Certi-Vex AC 1315 Super Seal provides good protection from the damaging effects of water penetration and staining. It also will enhance the color and impart an attractive gloss to colored and natural concrete surfaces. Certi-Vex AC 1315 Super Seal feature Vexcon’s breathable technology which allows moisture vapor to pass through rather than  becoming trapped, preventing whitening, peeling and flaking.

The product is designed for use on exterior above and below grade architectural concrete where a premium, long lasting, vibrant gloss and shine is required.

BENEFITS

  • Low VOC <350 grams/liter
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Non-yellowing
  • Meets ASTM C-1315 Type 1 Class A
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface reducing clean-up and maintenance
  • Good protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Fast drying
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)
  • Surfaces look newer and brighter

Certi-Vex AC 1315 Super Seal Flat

Low VOC breathable clear coating that seals and protects horizontal and vertical surfaces with a flat finish.

CERTI-VEX AC 1315 SUPER SEAL FLAT is a low VOC solvent base cure and seal coating that enhances new a existing concrete surfaces with a low sheen/matte appearance. The product is non yellowing and protects against water and salt penetration as well as staining. Certi-Vex AC1315 Super Seal Flat features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

Ideal for applications where a non-yellowing semi-gloss matte appearance is desired on horizontal or vertical concrete masonry, stamped and decorative concrete surfaces.

BENEFITS

  • Low VOC <350 grams/liter
  • Matte appearance
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Non-Yellowing
  • Meets ASTM C-1315 Type 1 Class A
  • Seals and hardens surface reducing clean up and maintenance
  • Excellent stain protection against attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Fast drying
  • Apply to damp surfaces without whitening or loss of adhesion
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 1315 Super Seal HG

Low VOC high solids breathable clear sealer that enhances and protects exterior concrete with a long lasting non yellowing high gloss finish.

CERTI-VEX AC 1315 SUPER SEAL HG is a premium high gloss, low VOC solvent base cure and seal coating for new and existing concrete surfaces. Certi-Vex AC 1315 Super Seal HG leaves a protective coating and is an excellent cure material for long term concrete performance. Certi-Vex AC 1315 Super Seal HG provides better protection from the damaging effects of water penetration and staining. It also will enhance the color and impart an attractive high gloss to colored and natural concrete surfaces. Certi-Vex AC 1315 Super Seal HG features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

The product is designed for use on exterior above and below grade architectural concrete where a premium, long lasting, high gloss shine is required.

BENEFITS

  • Low VOC <350 grams/liter
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Non-yellowing
  • High Gloss
  • Meets ASTM C-1315 Type 1 Class A
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface reducing clean-up and maintenance
  • Better protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Fast drying
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 25

Clear 25% solids breathable clear sealer that enhances and protects concrete with a UV resistant, durable gloss finish.

CERTI-VEX AC 25 is a solvent base clear curing, sealing, hardening, dustproofing and water repellent coating. The product provides for proper cement hydration and development of the concrete’s strength and durability, provides good protection from the damaging effects of water penetration and staining and is resistant to UV exposure. Certi-Vex AC 25 feature Vexcon’s breathable technology which allows moisture vapor to pass through rather than  becoming trapped, preventing whitening, peeling and flaking.

The product is designed for use on exterior above and below grade architectural concrete where gloss and shine is required and is a excellent base for most adhesives, paints and a variety of topcoats. Certi-Vex AC 25 meets the requirements of the Tile Adhesion Test of the Resilient Tile Institute and the Tile Adhesion Test Requirements of ASTM-C-1315.

BENEFITS

  • Economical solvent base cure and seal
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-1315 Type 1 Class B
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface reducing clean-up and maintenance
  • Good protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 30%

Cost effective 30% solids breathable clear sealer that enhances and protects concrete with a long lasting UV resistent high gloss finish.

CERTI-VEX AC 30 is a high gloss ready to use solvent base cure and seal coating for new and existing concrete surfaces. Certi-Vex AC 30 leaves a protective coating and is an excellent cure material for long term concrete performance. Certi-Vex AC 30 provides better protection from the damaging effects of water penetration and staining. It also will enhance the color and impart a high gloss to colored and natural concrete surfaces. Certi-Vex AC 30 features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

The product is designed for use on exterior above and below grade architectural concrete where a long lasting, high gloss shine is required.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • High Gloss
  • Meets ASTM C-1315 Type 1 Class B
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface reducing clean-up and maintenance
  • Better protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 309

Low VOC economical breathable sealer that protects concrete with a low gloss clear non-yellowing finish.

CERTI-VEX AC 309 is a low VOC fast drying curing, sealing, hardening and dust proofing clear coating that provides weather and chemical resistance to a wide variety of concrete surfaces. The product is ideal for use on new or existing exterior and interior above and  below grade architectural concrete where a durable, slip resistant and low gloss appearance is desired.

Certi-Vex AC 309 features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

 

BENEFITS

  • Non-Yellowing. Surface remains clear
  • Fast drying
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface reducing clean up and maintenance
  • Can be applied at temperatures as low as 20°F/-6°C
  • Economical
  • Protects against rain, sun, freezing temperatures, alkali and common industrial chemicals, oil, grease, de-icing salts, cleaners, airborne soot, dust and other pollutants
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Surfaces look newer and brighter
  • Re-coatable

StarSeal 1315 Beading Flat

Breathable clear coating that seals and protects horizontal and vertical surfaces with a flat finish.

STARSEAL 1315 BEADING FLAT is a water base cure and seal coating that enhances new and existing concrete surfaces with a low sheen/matte appearance. The product is non yellowing and protects against water and salt penetration as well as staining. StarSeal 1315 Beading Flat features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

Ideal for applications where a low odor, non-yellowing semi-gloss matte appearance is desired on horizontal or vertical concrete masonry, stamped and decorative concrete surfaces.

BENEFITS

  • Matte appearance
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-1315 Type 1, Class A
  • Non-Yellowing
  • Low odor
  • Seals and hardens surface reducing clean up and maintenance
  • Excellent stain protection against attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Apply to damp surfaces without whitening or loss of adhesion

StarSeal 1315 Concrete Stain

Enhances and revitalizes new and existing concrete with a hardened, wear resistant surface. Deep penetrating for uniform and long lasting color.

STARSEAL 1315 CONCRETE STAIN is a water base ready to use colored curing and sealing coating. The product quickly hardens to a wear resistant protective coating that enhances and revitalizes the appearance of new or existing concrete with an attractive, durable uniform color appearance. StarSeal 1315 Concrete Stain features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

The product is ideal for both interior and exterior applications, stamped and decorated concrete, concrete pavers, stucco or brick walls, architectural sections and colored concrete to even out color variations.

BENEFITS

  • Available in 15 standard and custom colors
  • Economical decorative coating
  • Revitalizes old, stained or uncolored concrete
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-1315 Type 2, Class B
  • Low odor
  • Seals and hardens surface reducing clean-up and maintenance
  • Excellent protection against staining, attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Corrects variations in colored concrete
  • Apply to damp surfaces without whitening or loss of adhesion
  • Vexcon breathable technology

StarSeal 30%

High Gloss long lasting, low odor 30% solids breathable sealer ideal for interior concrete.

STARSEAL 30% is a clear high gloss water base curing, sealing, hardening, dust proofing and water repellent coating formulated to provide a premium high gloss and wear resistant floor. StarSeal 30% forms a crystal clear coating that is permanent, tough, and resistant to yellowing and many chemicals. StarSeal 30% features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

The product is ideal for interior applications on new and existing concrete floors.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Seals and hardens surface reducing clean-up and maintenance
  • Excellent protection against staining, attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • High Gloss
  • Meets ASTM C-1315 Type 1, Class B
  • Vexcon breathable technology
  • Apply to damp surfaces without whitening or loss of adhesion
  • Low odor

StarSeal 309

Low gloss economical, low odor 15% solids breathable sealer ideal for interior concrete.

STARSEAL 309 is a economical water base curing, sealing, hardening, dust proofing, and water repellent coating. StarSeal 309 forms a crystal clear low gloss coating that protects and seals new and existing concrete surfaces. StarSeal 309 features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Apply to damp surfaces without whitening or loss of adhesion
  • Meets ASTM C-309
  • Seals and hardens surface reducing clean-up and maintenance
  • Protects against staining, attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Economical
  • Low odor

StarSeal 800

Medium gloss value priced, low odor 20% solids breathable sealer ideal for interior concrete.

STARSEAL 800 is a valued price high solids curing, sealing, hardening, dust proofing and water repellent coating. Easily to apply, StarSeal 800 quickly forms a hard, crystal clear medium gloss coating that is resistant to yellowing and many chemicals. StarSeal 800 features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

The product is ideal for both interior and exterior applications on new and existing concrete floors, stucco or brick walls, architectural sections.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Surface remains clear
  • Seals and hardens surface reducing clean-up and maintenance
  • Excellent protection against staining, attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Excellent base for adhesives
  • Meets ASTM C-309
  • Apply to damp surfaces without whitening or loss of adhesion
  • Vexcon breathable technology
  • Low odor

Promotions/Specials

Click here to learn more about our current Product Specials.