Concrete Solutions for architects, engineers and builders since 1974

Cure & Seal Coatings

Vexcon offers the widest selection of premium crystal-clear and colored concrete cure and seals. Whether using on new or existing concrete, our water base StarSeal® and solvent base Certi-Vex® brands are easy-to-use, non-yellowing and penetrate quickly to form a hard coating that is wear, chemical and stain resistant.

Certi-Vex AC 1315

Breathable clear sealer that enhances and protects exterior concrete with a non yellowing, durable gloss finish.

CERTI-VEX AC 1315 is a solvent base cure and seal coating for new and existing concrete surfaces. Certi-Vex AC 1315 leaves a clear protective coating and is an excellent cure material for long term concrete performance. Certi-Vex AC 1315 Super Seal provides good protection from the damaging effects of water penetration and staining. It also will enhance the color and impart an attractive gloss to colored and natural concrete surfaces. Certi-Vex AC 1315 feature Vexcon’s breathable technology which allows moisture vapor to pass through rather than  becoming trapped, preventing whitening, peeling and flaking.

The product is designed for use on exterior above and below grade architectural concrete where a premium, long lasting, vibrant gloss and shine is required.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Non-yellowing
  • Meets ASTM C-1315 Type 1 Class A
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface reducing clean-up and maintenance
  • Good protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Fast drying
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)
  • Surfaces look newer and brighter

Certi-Vex AC 1315 Beading Flat

Breathable clear coating that seals and protects horizontal and vertical surfaces with a flat finish.

CERTI-VEX AC 1315 BEADING FLAT is a solvent base cure and seal coating that enhances new a existing concrete surfaces with a low sheen/matte appearance. The product is non yellowing and protects against water and salt penetration as well as staining. Certi-Vex AC1315 Beading Flat features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

Ideal for applications where a non-yellowing semi-gloss matte appearance is desired on horizontal or vertical concrete masonry, stamped and decorative concrete surfaces.

BENEFITS

  • Matte appearance
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Non-Yellowing
  • Meets ASTM C-1315 Type 1 Class A
  • Seals and hardens surface reducing clean up and maintenance
  • Excellent stain protection against attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Apply to damp surfaces without whitening or loss of adhesion
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 1315 Concrete Stain

Enhances and revitalizes new and existing concrete with a hardened, wear resistant surface. Deep penetrating for uniform and long lasting color.

CERTI-VEX AC 1315 CONCRETE STAIN is a solvent base ready to use colored curing and sealing coating. The product quickly hardens to a wear resistant protective coating that enhances and revitalizes the appearance of new or existing concrete with an attractive, durable uniform color appearance. Certi-Vex AC 1315 Concrete Stain features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

The product is ideal for exterior applications, stamped and decorated concrete, concrete pavers, stucco or brick walls, architectural sections and colored concrete to even out color variations.

BENEFITS

  • Available in 15 standard and custom colors
  • Economical decorative coating
  • Revitalizes old, stained or uncolored concrete
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-1315 Type 2 Class B
  • Seals and hardens surface reducing clean-up and maintenance
  • Excellent protection against staining, attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Corrects variations in colored concrete
  • Apply to damp surfaces without whitening or loss of adhesion
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 1315 HG

Breathable high solids clear sealer that enhances and protects exterior concrete with a longer lasting non yellowing high gloss finish.

CERTI-VEX AC 1315 HG is a premium high gloss ready to use solvent base cure and seal coating for new and existing concrete surfaces. Certi-Vex AC 1315 HG leaves a protective coating and is an excellent cure material for long term concrete performance. Certi-Vex AC 1315 HG provides better protection from the damaging effects of water penetration and staining. It also will enhance the color and impart an attractive high gloss to colored and natural concrete surfaces. Certi-Vex AC HG features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

The product is designed for use on exterior above and below grade architectural concrete where a long lasting, high gloss shine is required.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Non-yellowing
  • High Gloss
  • Meets ASTM C-1315 Type 1 Class A
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface reducing clean-up and maintenance
  • Better protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 1315 Super Gloss

Highest solids sealer provides superior long term protection and gloss, fast drying, non yellowing and low VOC.

CERTI-VEX AC 1315 SUPER GLOSS is the highest solids cure and seal coating on the market today offering superior gloss and longer term performance. Certi-Vex AC1315 Super Gloss quickly forms a clear film that is tough, chemical and slip resistant, water repellent, dustproof, and non-yellowing. Certi-Vex AC1315 Super Gloss features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

The product is ideal for exterior applications on new and existing concrete floors, stamped and decorated concrete surfaces where superior gloss and long term performance is required.

BENEFITS

  • Low VOC <350 grams/liter
  • Non-Yellowing
  • Superior film gloss
  • Best wear resistance
  • Meets ASTM C-1315 Type 1 Class A
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface reducing clean up and maintenance
  • Excellent protection against staining, attack by alkali, oil, salt, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 1315 Super Seal

Low VOC breathable fast drying clear sealer that enhances and protects exterior concrete with a non yellowing, durable gloss finish.

CERTI-VEX AC 1315 SUPER SEAL is a low VOC solvent base cure and seal coating for new and existing concrete surfaces. Certi-Vex AC 1315 Super Seal leaves a clear protective coating and is an excellent cure material for long term concrete performance. Certi-Vex AC 1315 Super Seal provides good protection from the damaging effects of water penetration and staining. It also will enhance the color and impart an attractive gloss to colored and natural concrete surfaces. Certi-Vex AC 1315 Super Seal feature Vexcon’s breathable technology which allows moisture vapor to pass through rather than  becoming trapped, preventing whitening, peeling and flaking.

The product is designed for use on exterior above and below grade architectural concrete where a premium, long lasting, vibrant gloss and shine is required.

BENEFITS

  • Low VOC <350 grams/liter
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Non-yellowing
  • Meets ASTM C-1315 Type 1 Class A
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface reducing clean-up and maintenance
  • Good protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Fast drying
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)
  • Surfaces look newer and brighter

Certi-Vex AC 1315 Super Seal Flat

Low VOC breathable clear coating that seals and protects horizontal and vertical surfaces with a flat finish.

CERTI-VEX AC 1315 SUPER SEAL FLAT is a low VOC solvent base cure and seal coating that enhances new a existing concrete surfaces with a low sheen/matte appearance. The product is non yellowing and protects against water and salt penetration as well as staining. Certi-Vex AC1315 Super Seal Flat features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

Ideal for applications where a non-yellowing semi-gloss matte appearance is desired on horizontal or vertical concrete masonry, stamped and decorative concrete surfaces.

BENEFITS

  • Low VOC <350 grams/liter
  • Matte appearance
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Non-Yellowing
  • Meets ASTM C-1315 Type 1 Class A
  • Seals and hardens surface reducing clean up and maintenance
  • Excellent stain protection against attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Fast drying
  • Apply to damp surfaces without whitening or loss of adhesion
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 1315 Super Seal HG

Low VOC high solids breathable clear sealer that enhances and protects exterior concrete with a long lasting non yellowing high gloss finish.

CERTI-VEX AC 1315 SUPER SEAL HG is a premium high gloss, low VOC solvent base cure and seal coating for new and existing concrete surfaces. Certi-Vex AC 1315 Super Seal HG leaves a protective coating and is an excellent cure material for long term concrete performance. Certi-Vex AC 1315 Super Seal HG provides better protection from the damaging effects of water penetration and staining. It also will enhance the color and impart an attractive high gloss to colored and natural concrete surfaces. Certi-Vex AC 1315 Super Seal HG features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

The product is designed for use on exterior above and below grade architectural concrete where a premium, long lasting, high gloss shine is required.

BENEFITS

  • Low VOC <350 grams/liter
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Non-yellowing
  • High Gloss
  • Meets ASTM C-1315 Type 1 Class A
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface reducing clean-up and maintenance
  • Better protection against staining, attack by alkali, oil, cleaners, water penetration and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Fast drying
  • Vexcon breathable technology
  • Apply to temperatures as low as 20°F (-6° C)

Certi-Vex AC 309

Low VOC economical breathable sealer that protects concrete with a low gloss clear non-yellowing finish.

CERTI-VEX AC 309 is a low VOC fast drying curing, sealing, hardening and dust proofing clear coating that provides weather and chemical resistance to a wide variety of concrete surfaces. The product is ideal for use on new or existing exterior and interior above and  below grade architectural concrete where a durable, slip resistant and low gloss appearance is desired.

Certi-Vex AC 309 features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

 

BENEFITS

  • Non-Yellowing. Surface remains clear
  • Fast drying
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface reducing clean up and maintenance
  • Can be applied at temperatures as low as 20°F/-6°C
  • Economical
  • Protects against rain, sun, freezing temperatures, alkali and common industrial chemicals, oil, grease, de-icing salts, cleaners, airborne soot, dust and other pollutants
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Surfaces look newer and brighter
  • Re-coatable

Certi-Vex Aggregate Sealer

Pigmented sealer for exposed aggregate concrete surfaces. The product contains special earth tone (brown) pigments which highlight the natural color of the aggregate enhancing the aggregate appearance.

CERTI-VEX AGGREGATE SEALER is a ready to use high gloss non-yellowing film forming sealer specifically designed to improve the performance and appearance of exposed aggregate surfaces. The product contains special earth tone pigments which deepen and enriches the color of the aggregate. Certi-Vex Aggregate Sealer provides excellent surface protection from the damaging effects of water penetration, staining and everyday use.

BENEFITS

  • High gloss wet look
  • Deepens and enriches the color of the stone aggregate
  • UV Resistant – Non Yellowing
  • Meets ASTM C-1315 Type 1 Class A
  • Breathable sealer
  • Quick drying
  • Available in two tints, Walnut Brown and Limestone Gray
  • Aggregate pop out as a result fo freeze/thaw is virtually eliminated without effecting texture of treated surface
  • Provides improved resistance from the damaging affects of water, freeze thaw, staining and traffic

Certi-Vex Aggregate Sealer AIM

Low VOC pigmented sealer for exposed aggregate concrete surfaces. The product contains special earth tone (brown) pigments which highlight and enhance the natural color of the expose aggregate.

CERTI-VEX AGGREGATE SEALER AIM is a ready to use low VOC high gloss non-yellowing film forming sealer specifically designed to improve the performance and appearance of exposed aggregate surfaces. The product contains special earth tone pigments which deepen and enriches the color of the aggregate. Certi-Vex Aggregate Sealer AIM provides excellent surface protection from the damaging effects of water penetration, staining and everyday use.

BENEFITS

  • Low VOC <350 grams/liter
  • High gloss wet look
  • Deepens and enriches the color of the stone aggregate
  • UV Resistant – Non Yellowing
  • Meets ASTM C-1315 Type 1 Class A
  • Breathable sealer
  • Quick drying
  • Available in two tints, Walnut Brown and Limestone Gray
  • Aggregate pop out as a result fo freeze/thaw is virtually eliminated without effecting texture of treated surface
  • Provides improved resistance from the damaging affects of water, freeze thaw, staining and traffic

Certi-Vex Guard

Clear one component penetrating silane cure and seal. Enhances while providing long term protection against staining and damage caused by freeze/thaw, water, salts and deicer chemicals.

CERTI-VEX GUARD is a clear innovative one step penetrating silane water repellent and cure in one product that can be applied to new or existing concrete. It immediately penetrates the pores and capillaries of the concrete reacting with the alkali and moisture to form a hydrophobic gel in the pores and a water retentive coating on the surface. The product meets ASTM curing requirements and the Chloride Ion Penetration requirements of NCHRP 244. Certi-Vex Guard restricts moisture loss allowing concrete to reach maximum hardness and optimal long term performance while reducing staining, and the damaging affects of chloride, water, salt and deicer chemical penetration.

This innovative one-step product eliminates the costly removal of curing compounds and time consuming water curing of fresh concrete when a protective penetrating water repellent sealer is desired. Once applied, the surface is properly cured and water repellent is one application and puts concrete into service weeks sooner.

BENEFITS

  • Improves long term protection to exterior concrete from water and salt damage
  • Enhances surface appearance
  • Vexcon breathable technology
  • Cures fresh concrete
  • Minimizes crazing and shrinkage cracks
  • Complete project faster
  • Reduced labor costs
  • Quick formation of surface repellentcy and chemical resistance
  • Non-yellowing

Certi-Vex Guard AIM

Low VOC clear one component penetrating silane cure and seal. Enhances while providing long term protection against staining and damage caused by freeze/thaw, water, salts and deicer chemicals.

CERTI-VEX GUARD Clear AIM is a low VOC clear innovative one step penetrating silane water repellent and cure in one product that can be applied to new or existing concrete. It immediately penetrates the pores and capillaries of the concrete reacting with the alkali and moisture to form a hydrophobic gel in the pores and a water retentive coating on the surface. The product meets ASTM curing requirements and the Chloride Ion Penetration requirements of NCHRP 244. Certi-Vex Guard Clear AIM restricts mositure loss allowing concrete to reach maximum hardness and optimal long term performance while reducing staining, and the damaging affects of chloride, water, salt and deicer chemical penetration.

This innovative one-step product eliminates the costly removal of curing compounds and time consuming water curing of fresh concrete when a protective enetrating water repellent sealer is desired. Once applied, the surface is properly cured and water repellent in on application and puts concrete into service weeks sooner.

BENEFITS

  • Improves long term protection to exterior concrete from water and salt damage
  • Enhances surface appearance
  • Vexcon breathable technology
  • Cure fresh concrete
  • Minimizes crazing and shrinkage cracks
  • Deep penetration for maximum protection
  • Complete projects faster
  • Reduced labor costs
  • Quick formation of surface repellency and chemical resistance
  • Non-yellowing
  • Low VOC

Certi-Vex Re-Seal It

Improves the appearance of aged or weathered previously sealed concrete surfaces. The product "melts" into the existing sealer binding the new sealer coat to the existing sealer.

CERTI-VEX RE-SEAL IT is specifically designed to improve the appearance of aged or weathered previously sealed concrete surfaces.The products low viscosity allows for easier application, better breathability and adhesion to the existing sealer.

BENEFITS

  • Non-Yellowing
  • Fast drying
  • Rejuvenates old and   worn surfaces
  • Easy to use
  • VOC compliant

StarSeal 1315

Clear breathable sealer that enhances and protects exterior concrete with a non yellowing, durable gloss finish.

STARSEAL 1315 is a premium clear water base non-yellowing, curing, sealing and dust proofing protective coating. The product is designed for use on exterior, above and below grade architectural concrete where a premium, long lasting, vibrant gloss and shine is required. StarSeal 1315 features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

Ideal clear protection for exterior new and existing concrete, stamped and decorated concrete surfaces, stucco or brick walls and architectural sections.

BENEFITS

  • Clear protection for exterior new and existing concrete
  • Apply to damp surfaces without whitening or loss of adhesion
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Excellent protection against staining, attack by alkali, oil, cleaners and common industrial chemicals
  • Low odor
  • Non-Yellowing
  • Meets ASTM C-1315 Type 1, Class A
  • Prevents efflorescence, dusting and spalling
  • Seals and hardens surface reducing clean up and maintenance
  • Alkali Blocker
  • Vexcon’s breathable technology
  • Surfaces look newer and brighter

StarSeal 1315 Beading Flat

Breathable clear coating that seals and protects horizontal and vertical surfaces with a flat finish.

STARSEAL 1315 BEADING FLAT is a water base cure and seal coating that enhances new and existing concrete surfaces with a low sheen/matte appearance. The product is non yellowing and protects against water and salt penetration as well as staining. StarSeal 1315 Beading Flat features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

Ideal for applications where a low odor, non-yellowing semi-gloss matte appearance is desired on horizontal or vertical concrete masonry, stamped and decorative concrete surfaces.

BENEFITS

  • Matte appearance
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-1315 Type 1, Class A
  • Non-Yellowing
  • Low odor
  • Seals and hardens surface reducing clean up and maintenance
  • Excellent stain protection against attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Apply to damp surfaces without whitening or loss of adhesion

StarSeal 1315 Concrete Stain

Enhances and revitalizes new and existing concrete with a hardened, wear resistant surface. Deep penetrating for uniform and long lasting color.

STARSEAL 1315 CONCRETE STAIN is a water base ready to use colored curing and sealing coating. The product quickly hardens to a wear resistant protective coating that enhances and revitalizes the appearance of new or existing concrete with an attractive, durable uniform color appearance. StarSeal 1315 Concrete Stain features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

The product is ideal for both interior and exterior applications, stamped and decorated concrete, concrete pavers, stucco or brick walls, architectural sections and colored concrete to even out color variations.

BENEFITS

  • Available in 15 standard and custom colors
  • Economical decorative coating
  • Revitalizes old, stained or uncolored concrete
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-1315 Type 2, Class B
  • Low odor
  • Seals and hardens surface reducing clean-up and maintenance
  • Excellent protection against staining, attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Corrects variations in colored concrete
  • Apply to damp surfaces without whitening or loss of adhesion
  • Vexcon breathable technology

StarSeal 1500

Breathable high solids clear sealer that enhances and protects exterior concrete with a long lasting non yellowing high gloss finish.

STARSEAL 1500 is a clear high gloss water base non-yellowing, curing, sealing, hardening, dust proofing and water repellent protective coating. The product provides the greatest protection to UV exposure and is designed for use on exterior above grade architectural concrete where a premium, long lasting, vibrant gloss and shine is required. Independent laboratory testing confirms that the product’s non-yellowing characteristics outlast and out perform competitive products. StarSeal 1500 features Vexcon’s breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

High gloss clear protection for exterior applications on new and existing concrete floors, stamped and decorative concrete, stucco or brick walls, architectural sections, exposed aggregate and vertical walls.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Non-Yellowing
  • Meets ASTM C-1315 Type 1, Class A
  • Ideal for high UV exposed environments
  • Seals and hardens surface reducing clean-up and maintenance
  • Excellent protection against staining, attack by alkali, oil, cleaners and common industrial chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Apply to damp surfaces without whitening or loss of adhesion
  • Low odor

StarSeal 500

Non-yellowing, low odor exterior actylate curing, sealing, hardening dust proofing water and stain repellent. Breathable medium gloss, cost effective and non-yellowing sealer ideal for exterior & existing concrete.

StarSeal 500 is a water based 100% non-yellowing acrylate curing, sealing, hardening dust proofing, and water repellent compound which meets requirements of ASTM – Type A. Easily to apply, StarSeal 500 quickly forms a hard, crystal clear film that is tough, water repellent and, stain resistant.

BENEFITS

  • Provides for complete development of fresh concrete’s wear resistance and strength properties
  • Non-Yellowing
  • Clear gloss surface
  • Apply to damp surfaces without whitening or loss of adhesion
  • Seals and hardens surface, reducing clean-up and maintenance costs
  • Excellent protection against staining, attack by alkali, oil, cleaners and common chemicals
  • Prevents efflorescence, dusting and spalling
  • Vexcon breathable technology
  • Economical
  • Recoatable
  • Low odor

StarSeal Guard

Cost effective water based clear one-step penetrating silane water repellent, cure and seal. Cures fresh concrete while providing long term protection against damage caused by freeze/thaw, water, salts and deicer chemicals.

STARSEAL GUARD is a water base clear innovative one step penetrating silane water repellent cure and seal that can be applied to new or existing concrete. It immediately penetrates the pores and capillaries of the concrete reacting with the alkali and moisture to form a repellent hydrophobic gel in the pores and a water retentive membrane on the surface.

This membrane, which meets ASTM curing requirements and the Chloride Ion Penetration requirements of NCHRP 244 forms a film that restricts moisture loss allowing concrete to reach maximum hardness and reduces staining, chloride penetration, prevents intrusion of water, salts, deicer chemicals and acids that can result in costly damage to concrete and masonry.

This innovative one-step product eliminates the costly removal of curing compounds and time consuming water curing of fresh concrete when a protective penetrating water repellent sealer is desired. Once applied, the surface is properly cured and water repellent in one application and puts concrete into service weeks sooner.

BENEFITS

  • Improved long term protection to exterior concrete from water and salt damage
  • Enhances surface appearance
  • Vexcon breathable technology
  • Cures fresh concrete
  • Minimizes crazing and shrinkage cracks
  • Deep penetration for maximum protection
  • Complete projects faster
  • Reduced labor costs
  • Quick formation of surface repellency and chemical resistance
  • Non-yellowing
  • Low odor

Promotions/Specials

Please check back for future specials.