Concrete Solutions for architects, engineers and builders since 1974

Sealers/Film Forming

Our coatings will seal and enhance the surface appearance with a glossy clear or color coating while our deep penetrating sealers will protect and maintain the original surface appearance. Cost effective and easily applied to new or existing, vertical or horizontal concrete and masonry surfaces.

Certi-Vex Guard

Clear one component penetrating silane cure and seal. Enhances while providing long term protection against staining and damage caused by freeze/thaw, water, salts and deicer chemicals.

CERTI-VEX GUARD is a clear innovative one step penetrating silane water repellent and cure in one product that can be applied to new or existing concrete. It immediately penetrates the pores and capillaries of the concrete reacting with the alkali and moisture to form a hydrophobic gel in the pores and a water retentive coating on the surface. The product meets ASTM curing requirements and the Chloride Ion Penetration requirements of NCHRP 244. Certi-Vex Guard restricts moisture loss allowing concrete to reach maximum hardness and optimal long term performance while reducing staining, and the damaging affects of chloride, water, salt and deicer chemical penetration.

This innovative one-step product eliminates the costly removal of curing compounds and time consuming water curing of fresh concrete when a protective penetrating water repellent sealer is desired. Once applied, the surface is properly cured and water repellent is one application and puts concrete into service weeks sooner.

BENEFITS

  • Improves long term protection to exterior concrete from water and salt damage
  • Enhances surface appearance
  • Vexcon breathable technology
  • Cures fresh concrete
  • Minimizes crazing and shrinkage cracks
  • Complete project faster
  • Reduced labor costs
  • Quick formation of surface repellentcy and chemical resistance
  • Non-yellowing

Certi-Vex Guard AIM

Low VOC clear one component penetrating silane cure and seal. Enhances while providing long term protection against staining and damage caused by freeze/thaw, water, salts and deicer chemicals.

CERTI-VEX GUARD Clear AIM is a low VOC clear innovative one step penetrating silane water repellent and cure in one product that can be applied to new or existing concrete. It immediately penetrates the pores and capillaries of the concrete reacting with the alkali and moisture to form a hydrophobic gel in the pores and a water retentive coating on the surface. The product meets ASTM curing requirements and the Chloride Ion Penetration requirements of NCHRP 244. Certi-Vex Guard Clear AIM restricts mositure loss allowing concrete to reach maximum hardness and optimal long term performance while reducing staining, and the damaging affects of chloride, water, salt and deicer chemical penetration.

This innovative one-step product eliminates the costly removal of curing compounds and time consuming water curing of fresh concrete when a protective enetrating water repellent sealer is desired. Once applied, the surface is properly cured and water repellent in on application and puts concrete into service weeks sooner.

BENEFITS

  • Improves long term protection to exterior concrete from water and salt damage
  • Enhances surface appearance
  • Vexcon breathable technology
  • Cure fresh concrete
  • Minimizes crazing and shrinkage cracks
  • Deep penetration for maximum protection
  • Complete projects faster
  • Reduced labor costs
  • Quick formation of surface repellency and chemical resistance
  • Non-yellowing
  • Low VOC

Certi-Vex Guard CACS

Colored one component penetrating silane cure and seal. Enhances while providing long term protection against staining and damage caused by freeze/thaw, water, salts and deicer chemicals.

CERTI-VEX GUARD CACS is a colored, ready to use, breathable one-step penetrating silane water repellent cure and seal that provides maximum long term protection and a decorative appearance to concrete and masonry surfaces. Water and dissolved salts bead after 24 hours, Chloride Ion intrusion is reduced; protects against staining and damage caused by water, salts, deicer chemicals and acids. Applied on new or existing horizontal and vertical surfaces, it immediately penetrates the pores and capillaries of the concrete, reacting with the alkali and moisture to form a hydrophobic gel in the pores and a colored water retentive coating which seals the surface.

This innovative one-step product eliminates the costly removal of curing compounds and time consuming water curing of fresh concrete when a protective penetration water repellent sealer is desired. Once applied, the surface is properly cured and water repellent in on application and puts concrete into service weeks sooner.

BENEFITS

  • Improves long term protection to exterior concrete from water and salt damage
  • Enhances surface appearance
  • Available in 50 standard plus custom colors. See Vexcon’s Color Systems Chart
  • Vexcon breathable technology
  • Cures fresh concrete
  • Minimizes crazing and shrinkage cracks
  • Deep penetration for maximum protection
  • Complete projects faster
  • Reduced labor costs
  • Quick formation of surface repellency and chemical resistance
  • Non-yellowing
  • Excellent color retention (fade resistant)

StarSeal Guard

Cost effective water based clear one-step penetrating silane water repellent, cure and seal. Cures fresh concrete while providing long term protection against damage caused by freeze/thaw, water, salts and deicer chemicals.

STARSEAL GUARD is a water base clear innovative one step penetrating silane water repellent cure and seal that can be applied to new or existing concrete. It immediately penetrates the pores and capillaries of the concrete reacting with the alkali and moisture to form a repellent hydrophobic gel in the pores and a water retentive membrane on the surface.

This membrane, which meets ASTM curing requirements and the Chloride Ion Penetration requirements of NCHRP 244 forms a film that restricts moisture loss allowing concrete to reach maximum hardness and reduces staining, chloride penetration, prevents intrusion of water, salts, deicer chemicals and acids that can result in costly damage to concrete and masonry.

This innovative one-step product eliminates the costly removal of curing compounds and time consuming water curing of fresh concrete when a protective penetrating water repellent sealer is desired. Once applied, the surface is properly cured and water repellent in one application and puts concrete into service weeks sooner.

BENEFITS

  • Improved long term protection to exterior concrete from water and salt damage
  • Enhances surface appearance
  • Vexcon breathable technology
  • Cures fresh concrete
  • Minimizes crazing and shrinkage cracks
  • Deep penetration for maximum protection
  • Complete projects faster
  • Reduced labor costs
  • Quick formation of surface repellency and chemical resistance
  • Non-yellowing
  • Low odor

Promotions/Specials

Please check back for future specials.