Concrete Solutions for architects, engineers and builders since 1974

Bonding, Anchoring & Traffic Coatings

Whether repairing a crack, anchoring, patching, resurfacing or bonding two surfaces Vexcon has the right product to fit your particular application requirements. Make the right product choice with our single component latex and two component 100% solids moisture tolerant epoxies available in various strengths and viscosities.

Certi-Vex CE 210

High Modules, medium viscosity multi-purpose adhesive for bonding fresh and hardened concrete to hardened concrete. Meets ASTM C881. The product can also be used as a structural gravity feed crack repair and patching for horizontal and vertical surfaces.

Certi-Vex CE 210 is a two component, 100% solids, solvent free, moisture tolerant, high modulus medium viscosity structural construction multi purpose epoxy adhesive. Meets ASTM C881 types I, II, IV & V, Grade 2, Classes B&C and AASHTO M-235.

BENEFITS

  • High strength
  • Moisture tolerant
  • Excellent adhesion
  • Meets requirements of USDA for food facilities
  • 99.9 % reduction of ASTM C881 water absorption
  • Medium viscosity, pourable and self leveling

Certi-Vex CE 310

High Modules epoxy non sage gel adhesive for anchoring bolts, dowels and reinforcing steel in concrete. Meets ASTM C881. The product can also be used as a structural patch for horizontal and vertical overhead surfaces.

Certi-Vex CE 310 is a two component, 100% solids, solvent free, moisture tolerant, high modulus structural construction multi purpose epoxy gel adhesive for anchoring, dowelling and bonding applications. Meets ASTM C881 types I, II, IV & V, Grade 3, Classes B&C and AASHTO M-235.

BENEFITS

  • 1:1 mix ratio by volume
  • High strength
  • Non Sag consistency
  • Excellent adhesion
  • Very low water absorption
  • Meets requirements for USDA food plants

Certi-Vex CE 60

Epoxy broadcast overlay system for use as a binder for concrete skid resistant overlays on parking decks and other elevated surfaces.

Certi-Vex CE 60 is a two component, 100% solids, solvent free, moisture tolerant medium modules rapid setting epoxy polymer for bonding skid resistant surfaces. Meets ASTM C881 type III Grade 2, Class B.

 

BENEFITS

  • High strength
  • Moisture tolerant
  • Excellent adhesive
  • Excellent water resistance
  • Easy to use viscosity; pourable and self leveling
  • Available in French Gray and Clear

StarSeal Envio Bond

A modified vinyl acrylic emulsion with a 72 hour open time. Provides excellent bond strength between cement mortars and plastic concrete to hardened concrete.

STARSEAL ENVIO BOND is a ready to use technically advanced re-emulsifiable modified vinyl acrylic latex emulsion polymer bonding agent.The material provides both chemical and mechanical adhesion between two surfaces bonding hardend concrete to toppings, repair mortars, grouts and stucco.

BENEFITS

  • Creates a strong bond with superior adhesion
  • Interior/exterior applications
  • Ideal when bonding is delayed
  • Re-emulsifiable for 72 hrs.
  • Meets ASTM C-1059 Type I & II
  • Use on vertical, overhead and horizontal surfaces
  • Ultra-violet stable
  • Tinted blue for easy identification of treated areas

Promotions/Specials

Please check back for future specials.