Concrete Solutions for architects, engineers and builders since 1974

Floor Hardeners / Densifiers

Our deep penetrating liquid floor hardeners provide long-term protection against wear and staining on gray or colored concrete floors. They provide chemical resistance, water-repellency and offer optional resistance to staining. Easy and quick application, these products quickly form a low-sheen or glossy surface requiring no topical coatings, producing a low-maintenance, cost-effective, lifetime floor.

StarSeal EF Hardener 204

Economical, odorless dust proofing and hardening treatment, improves chemical and wear resistance.

STARSEAL EF HARDENER 204 is a water white silicate based solution that produces chemical hardening of concrete surfaces. It is formulated with proprietary additives to encourage maximum penetration and to minimize dusting.

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Reduces dusting
  • Allows for bonding of all finishes
  • Rehabilitates old worn floors by chemically reacting to provide a hard and durable surface
  • Meets requirements of Federal Specification CE-204
  • Economical

StarSeal Fusion

Invisible hole and crack repair treatment. Repair small air holes, aggregate pop-outs, voids, micro cracks, small spider cracks and similar surface imperfection.

STARSEAL FUSION is an advanced concrete repair and restoration treatment for StarSeal PS or other silicate densifying floor treatments. StarSeal Fusion will repair small air holes, aggregate pop-outs, voids, micro cracks, small spider cracks and similar surface imperfections. While other types of repair materials become brittle and discolor the surface leaving it blotchy looking, StarSeal Fusion repairs and blends into the existing color of the concrete yielding a consistent natural looking floor.

BENEFITS

  • Fills holes, cracks with same color as concrete
  • Makes repairs almost invisible
  • Cures in 1 hour for additional grinding
  • Increases gloss and clarity
  • Yields a smoother, denser surface
  • Compatible with all densifier, stain and dye systems
  • Fills early grinding scratches
  • Does not contain any pore clogging latex
  • Will work with most epoxy terrazzo and all cementitious terrazzo

StarSeal Lithium S+

A lithium silicate hardener/denisifier that rapidly penetrates without scrubbing and rinsing producing a fully densified floor that is wear-pattern free, shine retentive permanently sealed, low-maintenance, stain-free concrete floor.

StarSeal Lithium S + with shine enhancers intensifies the natural beauty of gray and decorative concrete producing a wear-pattern free, shine retentive permanently sealed, low-maintenance concrete floor.

BENEFITS

  • Deep penetration
  • Permanently protected and sealed
  • No scrubbing or rinsing required
  • Eliminates or reduces waste stream during installation
  • Odorless, non-hazardous, USDA approved
  • Breathable and UV stable
  • Slip resistant
  • Abrasion, wear resistant
  • No topical film to wear through
  • 10 year warranty
  • Low maintenance, no waxing or resurfacing required

StarSeal Protect MFS

Magnesium fluorsilicate floor hardener and dust-proofer. Chemically bonds with concrete to produce a dense, abrasion resistant and breathable floor that is highly resistant to most acids and chemicals.

STARSEAL PROTECT MFS is a magnesium fluorosilicate hardener and dust proofer formulated to chemically bond with concrete to produce a dense, abrasion resistant and breathable floor. StarSeal Protect MFS treated floors are functional, attractive and highly resistant to most acids and chemicals.

BENEFITS

  • Chemically reacts to harden and densify
  • Extends service life of floor
  • Non-film forming reduces maintenance
  • Provides greater abrasion and chemical resistance
  • Reduces dusting
  • Protects against absorption of oils and grease

StarSeal PS Clear

High solids densifier that provides a sealed and hardened surface that is low maintenance, wear and abrasion resistant. Easy and quick to apply, the product produces glossy floors without the use of a topical coating.

STARSEAL PS CLEAR enhances the natural beauty of gray and decorative concrete surfaces and produces a wear-pattern free, shine retentive permanently sealed, low-maintenance densified concrete floor. StarSeal PS Clear is a high solids potassium based silicate that rapidly penetrates without scrubbing and rinsing. Simply apply, re-distribute and re-apply until the concrete no longer absorbs the material. Once absorbed, StarSeal PS Clear reacts with the calcium hydroxide in the concrete producing a stronger more durable, dust free, superior looking and performing long lasting concrete floor.

BENEFITS

  • Long lasting and extremely durable
  • High solids forumation
  • No scrubbing or rinsing required
  • Eliminates or reduces waste stream during installation
  • Odorless, non-hazardous, USDA approved
  • Easy to clean
  • LEED points
  • Abrasion, wear resistant
  • No topical film to wear through
  • Performance warranty
  • Low maintenance. No waxing or resurfacing required

 

StarSeal PS Clear Finish Coat FSR System

Provides long lasting non-film forming stain protection, wear resistance and shine to densified/hardened and polished natural and colored concrete floors.

STARSEAL PS FINISH COAT ULTRA FSR provides the longest lasting non-film forming stain protection and enhanced shine to densified/hardened and polished natural and colored concrete floors. The system provides long term stain and wear resistance while significantly increasing the gloss level and the co-efficient of friction of the treated floor. Since there is no wax or coating to wear off, the StarSeal PS Finish Coat Ultra FSR system, when properly installed will not require reapplication saving down time, labor and material costs.

BENEFITS

  • Excellent food and chemical stain protection
  • Long lasting – No film to wear through
  • Increase gloss and clarity
  • No reapplication needed
  • Plugs micro-pores to provide stain protection
  • Intensifies colored floors
  • Helps hide polishing imperfections
  • Non-slip finished floor
  • Performance warranty
  • Very low maintenance

StarSeal PS Clear Guard FSR System

Provides excellent film forming stain protection, durable wear resistance and enhanced shine to densified/hardened and polished natural and colored concrete floors.

STARSEAL PS ULTRA GUARD SPE provides excellent film forming stain protection, durable wear resistance and enhanced shine to densified/hardened and polished natural and colored concrete floors. The system provides the best and quickest stain protection while significantly increasing the gloss level and the co-efficient of friction of the treated floor. Easy and cost effective to install.

BENEFITS

  • Increase gloss and clarity
  • Quick dry-less than one hour
  • High speed burnish same day
  • Best food and chemical stain protection
  • Durable wear resistant film
  • Breathable – No hazing or whitening
  • Cost effective
  • Intensifies colored floors
  • Helps hide polishing imperfections
  • Non-slip finished floor
  • Eliminates streaking
  • Performance warranty
  • Low maintenance

StarSeal PS Color FSR System

All the benefits of a StarSeal PS FSR floor with the addition of deep penetrating UV stable color that permanently locks into the surface.

Promotions/Specials

Please check back for future specials.