Concrete Solutions for architects, engineers and builders since 1974

Curing Compounds

Vexcon’s complete line of curing compounds meet the most demanding specifications and current environmental standards for new concrete. During concretes early hardening stage, our curing compound’s protective film ensures low moisture transmission allowing for maximum development of the concretes strength and wear resistance. Our curing compounds have a long and successful track record for providing consistent results and durable, long-lasting concrete.

Certi-Vex Envio Cure

Clear dissipating curing compounds with excellent moisture retention promoting longer life, better performing concrete. Available in three grades; general purpose commercial, state and federal specifications.

CERTI-VEX ENVIO CURE line of resin based clear curing compounds meet the most demanding specifications and current environmental standards for new concrete. During concretes early hardening stage, our curing compound’s protective film ensures low moisture transmission allowing for maximum development of the concretes strength and wear resistance, producing hard durable concrete.

BENEFITS

  • Low VOC <350 grams/liter
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-309 Type 1 or 1D, Class A&B
  • Meets FAA, CRD C-300 and is avaliable pre-approved by state DOT’s
  • Available with a factory supplied dye to aid in verification of application
  • Prevents efflorescence, dusting and spalling
  • Minimizes hair-line cracking
  • Three grades to choose from
  • Cleans up easily with water when wet
  • Meets ASTM D-869 for non settling

Certi-Vex Envio Cure Asphalt

Curing compound compatible with fresh concrete overlayed with asphalt.

CERTI-VEX ENVIO CURE ASPHALT is an emulsified hydrocarbon resin based curing compound ideal for use on fresh concrete that will be subsequently coated with bituminous mastic (asphalt) compounds, as well a sealer for new asphalt to seal off pores, hairline cracks, to provide water resistance, and to consolidate the new surface. Certi-Vex Envio Cure Asphalt dries quickly to form a tough, continuous, protective membrane. This film allows the concrete to develop maximum strength during its early hardening stage. On asphaltic pavements, it seals against the damaging effects of water and salt penetration.

BENEFITS

  • Low VOC <100 grams/liter
  • When used as a concrete cure, provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-309 Type 1 Class A
  • When used as a sealer on patches, prevents cracking and early evaporation from the patching material
  • Quick drying

Certi-Vex Envio Cure Clear 1315

Premium clear curing compound, based on Poly Alpha Methyl Styrene (PAMS) technology, improves hydration and abrasion resistance to yield top performing concrete.

CERTI-VEX ENVIOCURE CLEAR 1315 is a premium clear curing compound, based on Polyalpha Methyl Styrene technology designed to meet the toughest performance andtesting requirements. The product is non-settling, easy to use, quick drying and resists moisture loss to the lowest levels to ensure the concrete reaches maximum hardness, wear resistance and strength properties. The product is ideal for use where top performance is needed or to meet the strictest requirements of testing agencies.

BENEFITS

  • Low VOC <350 grams/liter
  • Meets ASTM C-309 Type 1 Class A&B
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Prevents efflorescence, dusting and spalling
  • Low moisture transmission rates
  • Meets ASTM C-1315 Type 1 Class B
  • Water borne for environmental concerns
  • Cleans up easily with water when wet

Certi-Vex Envio Cure Vertical

Clear dissipating curing compound for vertical concrete curing.

CERTI-VEX ENVIO CURE VERTICAL is a non-sag emulsion disspating resin cure applied to vertical surfaces. When properly applied the product will hang on the surface longer then standard curing compounds ensuring proper curing. Certi-Vex Envio Cure Vertical has a unique yellow fluorescent dye which is visible for a minimum of 4 hours but fades within 7 days even in covered and shaded areas.

BENEFITS

  • Does not run
  • Low VOC <350 grams/liter
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-309 Type 1D, Class B
  • Prevents efflorescence, dusting and spalling

Certi-Vex Envio Cure White

White pigmented dissipating curing compounds with excellent moisture retention promoting longer life, better performing concrete. Available in three grades; general purpose commercial, state and federal specifications.

CERTI-VEX ENVIO CURE WHITE line of resin based white curing compounds meet the most demanding specifications and current environmental standards for new concrete. During concretes early hardening stage, our curing compound’s protective film ensures low moisture transmission allowing for maximum development of the concretes strength and wear resistance, producing hard durable concrete.

BENEFITS

  • Low VOC <350 grams/liter
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-309 Type 2 Class A&B
  • Meets FAA, CRD C-300 and is available pre-approved by state DOT’s
  • Prevents efflorescence, dusting and spalling
  • Minimizes hair-line cracking
  • White pigment reflects sunlight preventing excessive heat build up
  • Three grades to choose from
  • Cleans up easily with water when wet
  • Meets ASTM D-869 for non settling

Certi-Vex Envio Cure White 1315

Premium white pigmented curing compound, based on Poly Alpha Methyl Styrene (PAMS) technology, Improves hydration and abrasion resistance to yield top performing concrete.

CERTI-VEX ENVIO CURE WHITE 1315 is a high solid premium white curing compound, based on Polyalpha Methyl Styrene solution polymer technology designed to meet the toughest performance and testing requirements. The product is non-settling, easy to use, quick drying and resists moisture loss to the lowest levels to ensure the concrete reaches maximum hardness, wear resistance and strength properties. The product is ideal for use where top performance is needed or to meet the strictest requirements of testing agencies.

BENEFITS

  • Improves abrasion resistance
  • Provides for complete development of concrete’s wear resistance and strength properties
  • VOC Compliant
  • Excellent moisture retention
  • Prevents efflorescence, dusting and spalling
  • Cleans up easily with water when wet
  • Improved durability for long life concrete

Certi-Vex Envio Cure White Wax

A white pigmented natural wax blend based curing compound that is easily applied and dries quickly to a uniform white film.

Certi-Vex Envio Cure White Wax  is a white pigmented natural wax blend based curing compound that is easily applied and dries quickly to a uniform white film.

During concretes early hardening stage, the products protective film ensures low moisture transmission allowing for maximum development of the concretes strength and wear resistance.

 

BENEFITS

  • Provides for complete development of concrete’s wear resistance and strength properties
  • Prevents efflorescence, dusting and spalling
  • Low moisture transmission rates
  • Water borne for environmental concerns
  • Cleans up easily with water when wet
  • Economical

Certi-Vex Envio Cure WL

Linseed oil emulsion with white pigments provides added protection against freeze/thaw cycles and penetration of corrosive salts minimizing maintenance and repair costs.

CERTI-VEX ENVIO CURE WL is an advanced curing and anti-spalling compound of white pigments and linseed oil that is easily spray applied. The product quickly dries to a white film that retains the gauging water allowing the concrete to achieve maximum hardness. This film also provides protection against freeze/thaw cycles and penetration by corrosive salts minimizing maintenance and repair cost.

BENEFITS

  • Low VOC <250 grams/liter
  • Life expectancy of concrete greatly extended
  • Protection against freeze/thaw cycles and corrosive salts
  • Minimizes maintenance and repair costs
  • Meets most standard state specifications and in most areas is available pre-approved
  • Low moisture transmission rates
  • Meets ASTM C-309 Type 2 Class A
  • Cleans up easily with water when wet

Certi-Vex Envio RC 1000

Low VOC clear solvent curing compound. Ideal for curing in below freezing temperatures as the product will not freeze.

CERTI-VEX ENVIO RC 1000 is a solvent based cold weather clear curing compound. Curing at colder, below freezing temperatures will not effect the performance of the product. During concretes early hardening stage, the products protective film ensures low moisture transmission allowing for maximum development of the concretes strength and wear resistance, producing hard durable concrete. The protective film will not discolor the concrete and dissipates as exposed to light, weather and construction traffic.

BENEFITS

  • Cold weather curing compound
  • Quick drying
  • Low VOC <350 grams/liter
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-309 Type 1 or 1D, Class A&B
  • Available with a factory supplied dye to aid in verification of application
  • Prevents efflorescence, dusting and spalling
  • Minimizes hair-line cracking

StarSeal EF Cure

Low Voc <100 g/l clear curing compound.

STARSEAL EF CURE is part of Vexcon’s complete line of environmentally friendly products designed to protect and improve concrete and masonry while leaving a lower environmental footprint. StarSeal EF Cure is a clear curing compound applied to freshly place concrete surfaces forming a tough, continuous, protective membrane. This membrane acts as a barrier allowing for low moisture transmission and maximum development of the concrete’s strength and wear resistance during concrete’s early hardening stage. The protective film will not discolor the concrete and dissipates as exposed to UV, weather and traffic.

BENEFITS

  • Low VOC <100 grams/liter
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-309 Type 1 or 1D, Class A&B
  • VOC compliant in every state
  • Low moisture transmission rates optimizes water retention
  • Prevents efflorescence, dusting, and spalling
  • Available with a factory supplied dye to aid in verification of application
  • Three grades to choose from
  • Increase resistance to cracking and surface crazing
  • Interior and exterior use

StarSeal EF Cure and Strip System

The most effective and environmentally friendly way to cure newly placed concrete to receive chemical treatments for exposed concrete floors. Consisting of an easily removable curing compound and companion cleaner, the system provides scheduling flexibility and puts floors into service fast.

Today there is a new generation of industrial, commercial and retail flooring for which the exposed concrete floor is a critical performance and aesthetic feature to the owner. StarSeal EF Cure and Strip system is the safest, most effective and environmentally friendly way to cure newly placed concrete receiving chemical treatments for exposed concrete floors. Consisting of an easily removable curing compound and companion cleaner, the system provides scheduling flexibility and puts floors into service faster.

StarSeal EF Cure White

Low Voc <100 g/l white curing compound.

STARSEAL EF CURE WHITE is part of Vexcon’s complete line of environmentally friendly products designed to protect and improve concrete and masonry while leaving a lower environmental footprint. StarSeal EF Cure White is a white pigmented curing compound applied to freshly place concrete surfaces forming a tough, continuous, protective membrane. This membrane acts as a barrier allowing for low moisture transmission and maximum development of the concrete’s strength and wear resistance during concrete’s early hardening stage. The protective film will not discolor the concrete and dissipates as exposed to UV, weather and traffic.

BENEFITS

  • Low VOC <100 grams/liter
  • Provides for complete development of concrete’s wear resistance and strength properties
  • Meets ASTM C-309 Type 2 Class A&B
  • VOC compliant in every state
  • Low moisture transmission rates optimizes water retention
  • Prevents efflorescence, dusting, and spalling
  • White pigment reflects sunlight preventing excessive  heat build up
  • Three grades to choose from
  • Increase resistance to cracking and surface crazing

StarSeal Guard DC

A water based innovative one step product that combines the benefits of a penetrating water repellent sealer and a dissipating white curing compound for fresh concrete into one product.

STARSEAL GUARD DC is a water base innovative one step penetrating silane water repellent dissipating white curing compound that is applied to new freshly placed concrete. It immediately penetrates the pores and capillaries of the concrete reacting with the alkali and moisture to form a repellent hydrophobic gel in the pores and a water retentive membrane on the surface.

BENEFITS

  • Complete projects faster
  • Cures fresh concrete
  • Seal & protect concrete against damage from salt & moisture
  • Produce stronger, more durable and longer lasting concrete
  • Meets industry standards
  • Cost savings
  • Deep penetration for maximum protection

 

Promotions/Specials

Please check back for future specials.